Timothy C. Droubay

Ferromagnetism in oxide semiconductors

Over the past five years, considerable work has been carried out in the exploration of candidate diluted oxide magnetic semiconductors with high Curie temperatures. Fueled by early experimental results and theoretical predictions, claims of ferromagnetism at and above room temperature in doped oxides have abounded. In general, neither the true nature of these materials nor the physical causes of the magnetism have been adequately determined. It is now apparent that these dilute magnetic systems are deceptively complex. We consider two well-characterizedn-type magnetically doped oxide semiconductors and explore the relationship between donor electrons and ferromagnetism.

Experimental determination of valence band maxima for SrTiO3,TiO2, and SrO and the associated valence band offsets with Si(001)

We address the issue of accurate determination of the valence band maximum (VBM) for SrTiO3(001) single crystals and epitaxial films, as well as TiO2(001) anatase and SrO epitaxial films. These measurements are of critical importance in determining valence band offsets in heterojunctions of these oxides with Si. Three different methods are analyzed: (1) fitting a Gaussian broadened theoretical density of states to the x-ray photoelectron valence band spectrum; (2) finding the intersection of a regression line that spans the linear portion of the x-ray photoelectron valence band leading edge with the background between the valence band maximum and the Fermi level; and (3) determining the energy at which high-resolution ultraviolet photoemission intensity at the leading edge goes to zero. We find that method 1 yields physically unreasonable results when used in conjunction with density functional theory because the latter does not predict the detailed shape of the valence bands in these oxides with sufficie...

Clusters and magnetism in epitaxial Co-doped TiO2 anatase

We show that under certain conditions, highly Co-enriched TiO2 anatase clusters nucleate on epitaxial TiO2 anatase grown on LaAlO3(001) by oxygen plasma assisted molecular beam epitaxy. In the most extreme cases, virtually all incident Co segregates to the clusters, yielding a nanoscale ferromagnetic phase that is not ferromagnetic in homogeneous films of the same Co concentration. The nucleation of this phase simultaneous with continuous epitaxial film growth must be carefully monitored in order to avoid drawing false conclusions about the film structure.

Epitaxial growth and properties of MBE-grown ferromagnetic Co-doped TiO2 anatase films on SrTiO3(001) and LaAlO3(001)

Abstract We have investigated the heteroepitaxial growth and materials properties of pure and Co-doped TiO 2 anatase on SrTiO 3 (001) and LaAlO 3 (001), grown by oxygen plasma assisted molecular beam epitaxy. This material is a promising new diluted magnetic semiconductor that shows large magnetization and a Curie temperature well above room temperature. We have found that epitaxial films with the highest crystalline quality and most uniform distribution of Co result when a rather slow growth rate (∼0.01 nm/s) is used over a substrate temperature range of 550–600 °C on LaAlO 3 (001). These conditions result in layer-by-layer growth of single-crystal films and a very low density of extremely small nanocrystalline inclusions. In contrast, growth at a higher rate (∼0.04 nm/s) leads to extensive formation of secondary-phase rutile nanocrystals to which Co diffuses and segregates. The rutile nanocrystals nucleate on the evolving anatase film surface in such a way that lattice strain between the two phases is minimized. Cobalt appears to substitute for Ti in the lattice and exhibits a +2 formal oxidation state. Both pure and Co-doped films can be grown as n-type semiconductors by controlled incorporation of oxygen atom vacancies. Free electrons are required to couple the Co(II) spin to a ferromagnetic state.

Lack of ferromagnetism in n-type cobalt-doped ZnO epitaxial thin films

Epitaxial thin films of cobalt-doped ZnO (Co : ZnO) were deposited by pulsed laser deposition (PLD) on both c-plane and r-plane sapphire (Al2 O3). The films exhibited high structural quality with narrow x-ray diffraction (XRD) rocking curve peak widths. X-ray absorption spectroscopy (XANES and EXAFS) confirmed well-ordered Co substitution for Zn in ZnO without the formation of secondary phases. A wide range of n-type conductivities (10−4–105 Ω cm) was achieved by controlling the deposition conditions, post-annealing in vacuum, and/or addition of Al during deposition. Despite the high structural quality of the Co : ZnO thin films, no significant room temperature ferromagnetism was observed under any processing or treatment conditions. The lack of ferromagnetism indicates that itinerant conduction band electrons alone are not sufficient to induce ferromagnetism in Co : ZnO, even when the carrier concentration is a significant fraction of the magnetic dopant concentration. The implications of this observation are discussed.

Specific Bonds between an Iron Oxide Surface and Outer Membrane Cytochromes MtrC and OmcA from Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is purported to express outer membrane cytochromes (e.g., MtrC and OmcA) that transfer electrons directly to Fe(III) in a mineral during anaerobic respiration. A prerequisite for this type of reaction would be the formation of a stable bond between a cytochrome and an iron oxide surface. Atomic force microscopy (AFM) was used to detect whether a specific bond forms between a hematite (Fe(2)O(3)) thin film, created with oxygen plasma-assisted molecular beam epitaxy, and recombinant MtrC or OmcA molecules coupled to gold substrates. Force spectra displayed a unique force signature indicative of a specific bond between each cytochrome and the hematite surface. The strength of the OmcA-hematite bond was approximately twice that of the MtrC-hematite bond, but direct binding to hematite was twice as favorable for MtrC. Reversible folding/unfolding reactions were observed for mechanically denatured MtrC molecules bound to hematite. The force measurements for the hematite-cytochrome pairs were compared to spectra collected for an iron oxide and S. oneidensis under anaerobic conditions. There is a strong correlation between the whole-cell and pure-protein force spectra, suggesting that the unique binding attributes of each cytochrome complement one another and allow both MtrC and OmcA to play a prominent role in the transfer of electrons to Fe(III) in minerals. Finally, by comparing the magnitudes of binding force for the whole-cell versus pure-protein data, we were able to estimate that a single bacterium of S. oneidensis (2 by 0.5 microm) expresses approximately 10(4) cytochromes on its outer surface.

Oxygen vacancies and ferromagnetism in CoxTi1−xO2−x−y

Cobalt-doped titanium dioxide, or CTO, has emerged in the past 2 years as a semiconducting, transparent, room-temperature ferromagnet. Very recently it has been shown that the magnetism in CTO often originates in surface nanoparticles or Co-rich regions that have a much-enhanced substitutional Co content up to 40% of Ti sites, so that magnetic CTO is not a true dilute magnetic semiconductor (DMS), but rather a fairly high-density spin system. In this work we describe a computational study of Co-rich CTO using the generalized gradient approximation to the density functional theory within the supercell model. Our total energy calculations show a strong tendency for Co-atom clustering or segregation on Ti sites. There is also a strong tendency for the oxygen vacancies to form complexes with the Co atoms. In addition, we find that the oxygen stoichiometry plays an essential role in determining the system’s magnetic order. The largest ordered moments require at least enough oxygen vacancies to put all of the C...

Antibody recognition force microscopy shows that outer membrane cytochromes OmcA and MtrC are expressed on the exterior surface of Shewanella oneidensis MR-1

ABSTRACT Antibody recognition force microscopy showed that OmcA and MtrC are expressed on the exterior surface of living Shewanella oneidensis MR-1 cells when Fe(III), including solid-phase hematite (Fe2O3), was the terminal electron acceptor. OmcA was localized to the interface between the cell and mineral. MtrC displayed a more uniform distribution across the cell surface. Both cytochromes were associated with an extracellular polymeric substance.

Comparison of the sputter rates of oxide films relative to the sputter rate of SiO2

There is a growing interest in knowing the sputter rates for a wide variety of oxides because of their increasing technological importance in many different applications. To support the needs of users of the Environmental Molecular Sciences Laboratory, a national scientific user facility, as well as our research programs, the authors made a series of measurements of the sputter rates from oxide films that have been grown by oxygen plasma-assisted molecular beam epitaxy, pulsed laser deposition, atomic layer deposition, electrochemical oxidation, or sputter deposition. The sputter rates for these oxide films were determined in comparison with those from thermally grown SiO2, a common reference material for sputter rate determination. The film thicknesses and densities for most of these oxide films were measured using x-ray reflectivity. These oxide films were mounted in an x-ray photoelectron or Auger electron spectrometer for sputter rate measurements using argon ion sputtering. Although the primary objec...

High‐Performance, Superparamagnetic, Nanoparticle‐Based Heavy Metal Sorbents for Removal of Contaminants from Natural Waters

We describe the synthesis and characterization of high-performance, superparamagnetic, iron oxide nanoparticle-based, heavy metal sorbents, which demonstrate excellent affinity for the separation of heavy metals in contaminated water systems (i.e., spiked Columbia River water). The magnetic nanoparticle sorbents were prepared from an easy-to-synthesize iron oxide precursor, followed by a simple, one-step ligand exchange reaction to introduce an affinity ligand to the nanoparticle surface that is specific to a heavy metal or class of heavy metal contaminants. The engineered magnetic nanoparticle sorbents have inherently high active surface areas, allowing for increased binding capacities. To demonstrate the performance of the nanoparticle sorbents, river water was spiked with specific metals and exposed to low concentrations of the functionalized nanoparticles. In almost all cases, the nanoparticles were found to be superior to commercially available sorbent materials as well as the unfunctionalized iron oxide nanoparticles.