Tonghui Xie

Optimization of heterotrophic cultivation of Chlorella sp. for oil production

The oleaginous microalga Chlorella sp. LAM-H screened from freshwater was proven to be a prospective feedstock for oil production according to its fatty acid composition. In order to enhance lipid production, response surface methodology (RSM) was used with central composite design (CCD) to optimize the heterotrophic cultivation of microalgae. The experiment results showed that a satisfactory second-order polynomial regression equation was achieved with a high coefficient of determination (R(2)=0.9911) in analysis of variance. The effects of individual factors and their interactions on lipid productivity were successfully revealed. The greatest lipid productivity reached 247.16 mg l(-1) d(-1) under the optimal conditions of glucose concentration 26.2 g l(-1), sodium nitrate concentration 2.06 g l(-1) and temperature 28.18 °C. Moreover, validation tests were performed and the results were very close to the predicted values. It was demonstrated that the obtained model was effective for predicting lipid productivity of the isolated microalga.

Biosynthesis of xanthan gum by Xanthomonas campestris LRELP-1 using kitchen waste as the sole substrate

Herein, we report the production of xanthan gum by fermentation using kitchen waste as the sole substrate. The kitchen waste was firstly pretreated by a simple hydrolysis method, after which the obtained kitchen waste hydrolysate was diluted with an optimal ratio 1:2. In a 5-L fermentor, the maximum xanthan production, reducing sugar conversion and utilization rates reached 11.73g/L, 67.07% and 94.82%, respectively. The kinetics of batch fermentation was also investigated. FT-IR and XRD characterizations confirmed the fermentation product as xanthan gum. TGA analyses showed that the thermal stability of the xanthan gum obtained in this study was similar to commercial sample. The molecular weights of xanthan gum were measured to be 0.69-1.37×10(6)g/mol. The maximum pyruvate and acetyl contents in xanthan gum were 6.11% and 2.49%, respectively. This study provides a cost-effective solution for the reusing of kitchen waste and a possible low-cost approach for xanthan production.

Effect of pretreatment on the enzymatic hydrolysis of kitchen waste for xanthan production

The study was carried out to gain insight into the effect of pretreatment on enzymatic hydrolysis of kitchen waste (KW) for xanthan fermentation. Herein, various pretreatments were applied and it was found that chemical pretreatment had positive effect on the following enzymatic or overall hydrolysis process. The highest reducing sugar concentration was obtained as 51.87g/L from 2% HCl (90°C) pretreated sample, while the Kjeldahl nitrogen (KDN) concentration was 7.79g/L. Kinetic study showed that first order kinetic model was suitable to describe the enzymatic hydrolysis process. The obtained kitchen waste hydrolysate (KWH) was successfully applied for xanthan fermentation. Xanthan concentration reached 4.09-6.46g/L when KWH with 2% HCl (90°C) pretreatment was applied as medium. In comparison, a xanthan concentration of 3.25-5.57g/L was obtained from KWH without pretreatment. Therefore, pretreatment of KW using diluted acid is favorable for the overall hydrolysis process and effective for xanthan fermentation.

Welan Gum-Modified Cellulose Bead as an Effective Adsorbent of Heavy Metal Ions (Pb2+, Cu2+, and Cd2+) in Aqueous Solution

A novel welan gum-modified cellulose adsorbent was prepared through emulsification, regeneration, and modification. SEM and FTIR were used to characterize the modified cellulose adsorbent. The adsorption isotherms of metal ions on the adsorbent were well fitted by Langmuir model, with the maximum adsorption capacities of 83.6, 77.0, and 67.4 mg/g for Cd2+, Pb2+, and Cu2+, respectively. The adsorption kinetics was well described using the pseudo-first-order model. Moreover, the adsorption capacities for the three metal ions increased with the increase of temperature, and the optimal pH was 5. Furthermore, the thermodynamic analysis indicated that the adsorption processes were spontaneous and endothermic.

Bacteria-assisted preparation of nano α-Fe2O3 red pigment powders from waste ferrous sulfate.

Massive ferrous sulfate with excess sulfuric acid is produced in titanium dioxide industry each year, ending up stockpiled or in landfills as solid waste, which is hazardous to environment and in urgent demand to be recycled. In this study, waste ferrous sulfate was used as a second raw material to synthesize nano α-Fe2O3 red pigment powders with a bacteria-assisted oxidation process by Acidithiobacillus ferrooxidans. The synthesis route, mainly consisting of bio-oxidation, precipitation and calcination, was investigated by means of titration, thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray fluorescence (XRF) to obtain optimum conditions. Under the optimum conditions, nano α-Fe2O3 red pigment powders contained 98.24wt.% of Fe2O3 were successfully prepared, with a morphology of spheroidal and particle size ranged from 22nm to 86nm and averaged at 45nm. Moreover, the resulting product fulfilled ISO 1248-2006, the standards of iron oxide pigments.

Ultrasonic-enhanced Fenton-like degradation of bisphenol A using a bio-synthesized schwertmannite catalyst

Schwertmannite (Sch) was synthesized by Acidithiobacillus ferrooxidans and used as Fenton-like catalyst for bisphenol A (BPA) degradation combining with ultrasonic technology (US). Physicochemical characterizations showed that the bio-synthesized Sch particles had a pompon-like morphology with high BET surface area of 92.92m2/g. The degradation reaction showed a two-stage pseudo-first-order kinetic process consisting of an induction period and a followed rapid degradation period. A synergistic effect existed between US and Sch on activating H2O2 and the synergy factor was calculated to be 2.32. The catalytic efficiency of the system was mainly affected by pH, Sch dosage and temperature, but less relevant to H2O2 concentration. Free OH radicals in the bulk solution were identified to be the dominant oxidant, which were produced by both heterogeneous and homogeneous processes. The promotional effect of US on Fenton-like degradation of BPA can be ascribed to the reasons of (1) increasing the radical generation by ultrasonic cavitation; (2) reducing the apparent activation energies of degradation reaction; (3) accelerating the dissolution of iron and (4) keeping the high surface area of catalyst by continuous surface cleaning. Ecotoxicity tests indicated lower toxicities of intermediates than BPA. In addition, Sch exhibited high reusability in the recycle study.

Nitrate concentration-shift cultivation to enhance protein content of heterotrophic microalga Chlorella vulgaris: Over-compensation strategy

Protein production from microalgae requires both high cell density during cultivation and high protein content in cells. Heterotrophic microalgae can achieve high cell density, and yet are confronted with the problem of low protein content. Based on over-compensation strategy, a new concentration-shift method was proposed to cultivate heterotrophic Chlorella vulgaris, aiming to increase protein content. With a prior starvation period, microalgae utilized more nitrate and accumulated more proteins compared to one-stage cultivation. Considering the convenience of operation, nitrate-added culture was adopted for producing heterotrophic microalgae, rather than sterile centrifugal culture. Operating parameters including nitrate concentration in N-deficient medium, N-starved time and nitrate concentration in N-rich medium were optimized, which were 0.18gl-1, 38h and 2.45gl-1, respectively. Under the optimized conditions, protein content in heterotrophic Chlorella reached 44.3%. Furthermore, the heterotrophic microalga was suggested to be a potential single-cell protein source according to the amino acid composition.

Preparation of quaternary ammonium–Chlorella vulgaris and its adsorption of Ag(CN)2−

A novel anion exchange resin, quaternary ammonium-Chlorella vulgaris (QACV), was prepared by introducing quaternary ammonium groups onto dried Chlorella vulgaris as base material. Degrees of epoxy, amine and quaternary ammonium groups of QACV were measured. Water retention, optical microscopy, and Fourier transform infrared spectrometry were used to characterize QAVC. The adsorption behavior of QACV towards Ag(CN)2- in different conditions was studied carefully. The results showed that QAVC was efficient to adsorb Ag(CN)2- at pH 9-11, and adsorption equilibrium was almost reached in 30 min. Both kinetics and isotherm parameters in the adsorption process were obtained. The data indicated that the pseudo-second-order model provided a good correlation for adsorption of Ag(CN)2- on QACV and the calculated rate constant of the adsorption was 3.51 g/(mmol min). The equilibrium data fitted well in the Langmuir isotherm and the estimated maximum adsorption capacity qm was 1.96 mmol/g. The dimensionless separation factor RL was between 0 and 1, suggesting that the adsorption process of Ag(CN)2- using QACV was favorable. The QACV could be used successively three times without significantly affecting its adsorption efficiency. Chlorella vulgaris was a potential base material to be modified with quaternary ammonium groups to prepare an adsorbent for adsorption of Ag(CN)2-.