Toyli Anniyev

Lattice-strain control of the activity in dealloyed core–shell fuel cell catalysts

Electrocatalysis will play a key role in future energy conversion and storage technologies, such as water electrolysers, fuel cells and metal-air batteries. Molecular interactions between chemical reactants and the catalytic surface control the activity and efficiency, and hence need to be optimized; however, generalized experimental strategies to do so are scarce. Here we show how lattice strain can be used experimentally to tune the catalytic activity of dealloyed bimetallic nanoparticles for the oxygen-reduction reaction, a key barrier to the application of fuel cells and metal-air batteries. We demonstrate the core-shell structure of the catalyst and clarify the mechanistic origin of its activity. The platinum-rich shell exhibits compressive strain, which results in a shift of the electronic band structure of platinum and weakening chemisorption of oxygenated species. We combine synthesis, measurements and an understanding of strain from theory to generate a reactivity-strain relationship that provides guidelines for tuning electrocatalytic activity.

Low O2 dissociation barrier on Pt(111) due to adsorbate-adsorbate interactions

O(2) dissociation on Pt(111) has been followed at low and saturation coverage using temperature-programmed x-ray photoelectron spectroscopy and simulated with mean-field kinetic modeling, yielding dissociation (E(a)) and desorption (E(d)) barriers of 0.32 and 0.36 eV, respectively. Density functional theory calculations show that E(a) is strongly influenced by the O-O interatomic potential in the atomic final state: of the supercells considered, that which maximizes attractive third-nearest-neighbor interactions in the atomic final state yields both the lowest computed dissociation barrier (0.24 eV) and the best agreement with experiment. It is proposed that the effect of adsorbate-adsorbate interactions must be considered when modeling catalytic processes involving dissociative steps.

Vacuum space charge effects in sub-picosecond soft X-ray photoemission on a molecular adsorbate layer

Vacuum space charge induced kinetic energy shifts of O 1s and Ru 3d core levels in femtosecond soft X-ray photoemission spectra (PES) have been studied at a free electron laser (FEL) for an oxygen layer on Ru(0001). We fully reproduced the measurements by simulating the in-vacuum expansion of the photoelectrons and demonstrate the space charge contribution of the high-order harmonics in the FEL beam. Employing the same analysis for 400 nm pump-X-ray probe PES, we can disentangle the delay dependent Ru 3d energy shifts into effects induced by space charge and by lattice heating from the femtosecond pump pulse.

Complementarity between high-energy photoelectron and L-edge spectroscopy for probing the electronic structure of 5d transition metal catalysts

We demonstrate the successful use of hard X-ray photoelectron spectroscopy (HAXPES) for selectively probing the platinum partial d-density of states (DOS) in a Pt-Cu nanoparticle catalyst which shows activity superior to pure Pt towards the oxygen-reduction reaction (ORR). The information about occupied Pt d-band states was complemented by Pt L(2)-edge X-ray absorption near-edge spectroscopy (XANES), which probes unoccupied valence states. We found a significant electronic perturbation of the Pt projected d-DOS which was narrowed and shifted to higher binding energy compared to pure platinum. The effect of this electronic structure perturbation on the chemical properties of the nanoparticle surface is discussed in terms of the d-band model. We have thereby demonstrated that the combination of L-edge spectroscopy and HAXPES allows for an experimental derivation of the valence electronic structure in an element-specific way for 5d metal catalysts.

Peroxide-like intermediate observed at hydrogen rich condition on Pt(111) after interaction with oxygen

Hydrogen peroxide has been found to form as a byproduct during fuel cell operation, which is linked to the degradation of the ion exchange membrane resulting in a shorter lifetime of the fuel cell. Using O 1s X-ray photoelectron spectroscopy and X-ray absorption spectroscopy we investigated the molecular oxygen adsorption on hydrogenated Pt(111) and found that adsorbed hydrogen promotes the formation of a hydrogen peroxide-like intermediate. Polarization dependent X-ray absorption spectroscopy reveals that the O-O molecular axis is close to parallel and the OH group is perpendicular to the surface.

Double Role of Water in the Fuel Cell Oxygen Reduction Reaction

Water is present during the normal operating condition of polymer electrolyte membrane fuel cells (PEMFCs) and we have, through model experiments on a platinum surface using x-ray photoelectron spectroscopy, investigated its role in two different stages in the oxygen reduction reaction (ORR). We found that the activation of oxygen to the adsorbed atomic phase occurs readily in the dry region, but not in the humid region process. In this case, water is acting to inhibit the active sites on the catalyst. On the contrary, water is found to promote the reduction of adsorbed atomic oxygen in the formation of a water-hydroxyl surface complex.

Tuning the Metal–Adsorbate Chemical Bond through the Ligand Effect on Platinum Subsurface Alloys

Scratching beneath the surface: Pt-M(3d)-Pt(111) (M(3d) = Co, Ni) bimetallic subsurface alloys have been designed to show the ligand effect tunes reactivity in oxygen and hydrogen adsorption systems. The platinum-oxygen bond order was investigated by oxygen atom projection in the occupied and unoccupied space using X-ray emission spectroscopy (XES) and X-ray absorption spectroscopy (XAS).

In situ x-ray probing reveals the importance of surface platinum oxide formation in fuel cell catalysis

In situ X-ray absorption spectroscopy (XAS) at the Pt L3 edge is a useful probe for Pt–O interactions at polymer electrolyte membrane fuel cell (PEMFC) cathodes. We show that XAS using the high ene ...In situ X-ray absorption spectroscopy (XAS) at the Pt L(3) edge is a useful probe for Pt-O interactions at polymer electrolyte membrane fuel cell (PEMFC) cathodes. We show that XAS using the high energy resolution fluorescence detection (HERFD) mode, applied to a well-defined monolayer Pt/Rh(111) sample where the bulk penetrating hard X-rays probe only surface Pt atoms, provides a unique sensitivity to structure and chemical bonding at the Pt-electrolyte interface. Ab initio multiple-scattering calculations using the FEFF code and complementary extended X-ray absorption fine structure (EXAFS) results indicate that the commonly observed large increase of the white-line at high electrochemical potentials on PEMFC cathodes originates from platinum oxide formation, whereas previously proposed chemisorbed oxygen-containing species merely give rise to subtle spectral changes.