Upendra Ummethala

REBL: design progress toward 16 nm half-pitch maskless projection electron beam lithography

REBL (Reflective Electron Beam Lithography) is a novel concept for high speed maskless projection electron beam lithography. Originally targeting 45 nm HP (half pitch) under a DARPA funded contract, we are now working on optimizing the optics and architecture for the commercial silicon integrated circuit fabrication market at the equivalent of 16 nm HP. The shift to smaller features requires innovation in most major subsystems of the tool, including optics, stage, and metrology. We also require better simulation and understanding of the exposure process. In order to meet blur requirements for 16 nm lithography, we are both shrinking the pixel size and reducing the beam current. Throughput will be maintained by increasing the number of columns as well as other design optimizations. In consequence, the maximum stage speed required to meet wafer throughput targets at 16 nm will be much less than originally planned for at 45 nm. As a result, we are changing the stage architecture from a rotary design to a linear design that can still meet the throughput requirements but with more conventional technology that entails less technical risk. The linear concept also allows for simplifications in the datapath, primarily from being able to reuse pattern data across dies and columns. Finally, we are now able to demonstrate working dynamic pattern generator (DPG) chips, CMOS chips with microfabricated lenslets on top to prevent crosstalk between pixels.

Reflective electron-beam lithography: progress toward high-throughput production capability

Maskless electron beam lithography can potentially extend semiconductor manufacturing to the 16 nm technology node and beyond. KLA-Tencor is developing Reflective Electron Beam Lithography (REBL) targeting high-volume 16 nm half pitch (HP) production. This paper reviews progress in the development of the REBL system towards its goal of 100 wph throughput for High Volume Manufacturing (HVM) at the 2X and 1X nm nodes. We will demonstrate the ability to print TSMC test patterns with the integrated system in photoresist on silicon wafers at 45 nm resolution. Additionally, we present simulation and experimental results that demonstrate that the system meets performance targets for a typical foundry product mix. Previously, KLA-Tencor reported on the development of a REBL tool for maskless lithography at and below the 16 nm HP technology node1. Since that time, the REBL team and its partners (TSMC, IMEC) have made good progress towards developing the REBL system and Digital Pattern Generator (DPG) for direct write lithography. Traditionally, e-beam direct write lithography has been too slow for most lithography applications. E-beam direct write lithography has been used for mask writing rather than wafer processing since the maximum blur requirements limit column beam current - which drives e-beam throughput. To print small features and a fine pitch with an e-beam tool requires a sacrifice in processing time unless one significantly increases the total number of beams on a single writing tool. Because of the continued uncertainty with regards to the optical lithography roadmap beyond the 16 nm HP technology node, the semiconductor equipment industry is in the process of designing and testing e-beam lithography tools with the potential for HVM.

Reflective electron beam lithography: A maskless ebeam direct write lithography approach using the reflective electron beam lithography concept

Reflective electron beam litography (REBL) utilizes several novel technologies to generate and expose lithographic patterns at throughputs that could make ebeam maskless lithography feasible for high volume manufacturing. The REBL program was described in a previous article [P. Petric et al., J. Vac. Sci. Technol. B 27, 161 (2009)] 2 years ago. This article will review the system architecture and the progress of REBL in the past 2 years. The main technologies making REBL unique are the reflective electron optics, the rotary stage, and the dynamic pattern generator (DPG). Changes in how these concepts have been implemented in a new design will be discussed. The main disadvantage of today’s electron beam direct write is low throughput; it takes many tens of hours to expose a 300 mm wafer today using ebeam lithography. The projected system throughput performance with the integrated technology of the reflective optics, DPG, and a multiple wafer rotary stage will be shown incorporating the performance data for the new column design.Reflective electron beam litography (REBL) utilizes several novel technologies to generate and expose lithographic patterns at throughputs that could make ebeam maskless lithography feasible for high volume manufacturing. The REBL program was described in a previous article [P. Petric et al., J. Vac. Sci. Technol. B 27, 161 (2009)] 2 years ago. This article will review the system architecture and the progress of REBL in the past 2 years. The main technologies making REBL unique are the reflective electron optics, the rotary stage, and the dynamic pattern generator (DPG). Changes in how these concepts have been implemented in a new design will be discussed. The main disadvantage of today’s electron beam direct write is low throughput; it takes many tens of hours to expose a 300 mm wafer today using ebeam lithography. The projected system throughput performance with the integrated technology of the reflective optics, DPG, and a multiple wafer rotary stage will be shown incorporating the performance data for...

New advances with REBL for maskless high-throughput EBDW lithography

REBL (Reflective Electron Beam Lithography) is a program for the development of a novel approach for highthroughput maskless lithography. The program at KLA-Tencor is funded under the DARPA Maskless Nanowriter Program. A DPG (digital pattern generator) chip containing over 1 million reflective pixels that can be individually turned on or off is used to project an electron beam pattern onto the wafer. The DARPA program is targeting 5 to 7 wafers per hour at the 45 nm node, and this paper will describe improvements to both increase the throughput as well as extend the system to the 2x nm node and beyond. This paper focuses on three specific areas of REBL technology. First, a new column design has been developed based on a Wien filter to separate the illumination and projection beams. The new column design is much smaller, and has better performance both in resolution and throughput than the first column which used a magnetic prism for separation. This new column design is the first step leading to a multiple column system. Second, the rotary stage latest results of a fully integrated DPG CMOS chip with lenslets will be reviewed. An array of over 1 million micro lenses which is fabricated on top of the CMOS DPG chip has been developed. The microlens array eliminates crosstalk between adjacent pixels, maximizes contrast between on and off states, and provides matching of the NA between the DPG reflector and the projection optics.

Challenges in the application of hybrid reluctance actuators in scanning positioning stages in vacuum with nanometer accuracy and mGauss magnetic stray field

The actuators used in high precision applications have come a long way from simply electro-motors to become mechatronic system components which achieve accuracy by being robust against disturbances and having a highly predictable behavior.

Applications of control systems and optimization in the design of semiconductor capital equipment

This tutorial presents several examples of high performance control systems in the Semiconductor equipment industry. Examples include technologies used in lithography and mask inspection.

Reflective electron-beam lithography performance for the 10nm logic node

Maskless electron beam lithography has the potential to extend semiconductor manufacturing to the sub-10 nm technology node. KLA-Tencor is currently developing Reflective Electron Beam Lithography (REBL) for high-volume 10 nm logic (16 nm HP). This paper reviews progress in the development of the REBL system towards its goal of 100 wph throughput for High Volume Lithography (HVL) at the 2X and 1X nm nodes. In this paper we introduce the Digital Pattern Generator (DPG) with integrated CMOS and MEMs lenslets that was manufactured at TSMC and IMEC. For REBL, the DPG is integrated to KLA-Tencor pattern generating software that can be programmed to produce complex, gray-scaled lithography patterns. Additionally, we show printing results for a range of interesting lithography patterns using Time Domain Imaging (TDI). Previously, KLA-Tencor reported on the development of a Reflective Electron Beam Lithography (REBL) tool for maskless lithography at and below the 22 nm technology node1. Since that time, the REBL team and its partners (TSMC, IMEC) have made good progress towards developing the REBL system and Digital Pattern Generator (DPG) for direct write lithography. Traditionally, e-beam direct write lithography has been too slow for most lithography applications. Ebeam direct write lithography has been used for mask writing rather than wafer processing since the maximum blur requirements limit column beam current - which drives e-beam throughput. To print small features and a fine pitch with an e-beam tool requires a sacrifice in processing time unless one significantly increases the total number of beams on a single writing tool. Because of the continued uncertainty with regards to the optical lithography roadmap beyond the 22 nm technology node, the semiconductor equipment industry is in the process of designing and testing e-beam lithography tools with the potential for HVL.