Vijay Sivan

Photochemically induced motion of liquid metal marbles

We demonstrate photochemically induced actuation of liquid metal marbles, which are liquid metal droplets encased in micro/nanoparticles. The WO3 nanoparticles coated marbles are placed in H2O2 solution, and their surfaces are illuminated with UV light. The semiconducting WO3 coating behaves as a photocatalyst to trigger a photochemical reaction, generating oxygen bubbles that propel the marble. The actuation of the marbles is investigated under different H2O2 concentrations, light intensities, and marble dimensions. Equations describing the fundamentals of such actuations are presented.

Highly efficient selective metamaterial absorber for high-temperature solar thermal energy harvesting

In this work, a metamaterial selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the fabricated solar absorber is characterized to be higher than 90% in the UV, visible and, near infrared (IR) regime, while the mid-IR emittance is around 20%. The high broadband absorption in the solar spectrum is realized by the excitation of surface plasmon and magnetic polariton resonances, while the low mid-IR emittance is due to the highly reflective nature of the metallic components. Further directional and polarized reflectance measurements show wide-angle and polarization-insensitive high absorption within solar spectrum. Temperature-dependent spectroscopic characterization indicates that the optical properties barely change at elevated temperatures up to 350{\deg}C. The solar-to-heat conversion efficiency with the fabricated metamaterial solar absorber is predicted to be 78% at 100{\deg}C without optical concentration or 80% at 400{\deg}C with 25 suns, and could be further improved with better fabrication processes and geometric optimization during metamaterial design. The strong spectral selectivity, favorable diffuse-like behavior, and excellent thermal stability make the metamaterial selective absorber promising for significantly enhancing solar thermal energy harvesting in various system at mid to high temperatures.

Liquid Metal/Metal Oxide Frameworks with Incorporated Ga2O3 for Photocatalysis

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activity due to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt % incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

An Investigation on Platelet Transport during Thrombus Formation at Micro-Scale Stenosis

This paper reports on an investigation of mass transport of blood cells at micro-scale stenosis where local strain-rate micro-gradients trigger platelet aggregation. Using a microfluidic flow focusing platform we investigate the blood flow streams that principally contribute to platelet aggregation under shear micro-gradient conditions. We demonstrate that relatively thin surface streams located at the channel wall are the primary contributor of platelets to the developing aggregate under shear gradient conditions. Furthermore we delineate a role for red blood cell hydrodynamic lift forces in driving enhanced advection of platelets to the stenosis wall and surface of developing aggregates. We show that this novel microfluidic platform can be effectively used to study the role of mass transport phenomena driving platelet recruitment and aggregate formation and believe that this approach will lead to a greater understanding of the mechanisms underlying shear-gradient dependent discoid platelet aggregation in the context of cardiovascular diseases such as acute coronary syndromes and ischemic stroke.

Influence of semiconducting properties of nanoparticle coating on the electrochemical actuation of liquid metal marble

Semiconducting properties of nanoparticle coating on liquid metal marbles can present opportunities for an additional dimension of control on these soft objects with functional surfaces in aqueous environments. We show the unique differences in the electrochemical actuation mechanisms of liquid metal marbles with n- and p-type semiconducting nanomaterial coating. A systematic study on such liquid metal marbles shows voltage dependent nanoparticle cluster formation and morphological changes of the liquid metal core during electrochemical actuations and these observations are unique to p-type nanomaterial coated liquid metal marbles.

Precise, reproducible nano-domain engineering in lithium niobate crystals

We present a technique for domain engineering the surface of lithium niobate crystals with features as small as 100 nm. A film of chromium (Cr) is deposited on the lithium niobate surface and patterned using electron beam lithography and lift-off and then irradiated with a wide diameter beam of intense visible laser light. The regions patterned with chromium are domain inverted while the uncoated regions are not affected by the irradiation. With the ability to realize nanoscale surface domains, this technique could offer an avenue for fabrication of nano-photonic and phononic devices.

Etching of lithium niobate using standard Ti indiffusion technique

We present evidence of etching LiNbO3 when annealing two wafers in contact with an intermediate Ti strip. Etched features are characterized qualitatively using atomic force microscopy. The impact of the Ti strip thickness on the depth and roughness of the etched surface is quantified. Etched trenches of similar depths to the original Ti film are achieved with very smooth etched surface.

Ultraviolet laser induced domain inversion on chromium coated lithium niobate crystals

Direct UV laser writing on chromium coated lithium niobate (LiNbO3) crystals is found to produce spontaneous domain inversion associated with the exposed UV laser tracks. Experimental evidence suggests that this effect is attributed to local out-diffusion of oxygen, reducing the LiNbO3 crystal surface due to the presence of chromium. The thin chromium film becomes hot and reactive after absorbing the UV laser radiation thus acting as an oxygen getter. This very efficient process enables the inversion of domains at lower intensities as compared to other direct laser based poling methods practically eliminating the deleterious surface damage induced by the direct absorption of the UV laser radiation by the crystal. Furthermore, the versatility of this domain fabrication method, is demonstrated by the production of inverted domain structures on Z-, Y- and 128°YX-cut substrates.

Ultraviolet laser-induced poling inhibition produces bulk domains in MgO-doped lithium niobate crystals

We report the realization of high-resolution bulk domains achieved using a shallow, structured, domain inverted surface template obtained by UV laser-induced poling inhibition in MgO-doped lithium niobate. The quality of the obtained bulk domains is compared to those of the template and their application for second harmonic generation is demonstrated. The present method enables domain structures with a period length as small as 3 μm to be achieved. Furthermore, we propose a potential physical mechanism that leads to the transformation of the surface template into bulk domains.

Investigation of the physical origins of etching LiNbO3 during Ti in-diffusion

We investigate the physical origins of etching observed during Ti diffusion. The relationship between observed etch depth and water vapor content in the annealing environment is quantified. The dynamics of the etching process are also identified. It is discovered that water vapor content is essential for etching and that there is a characteristic delay before etching is observed. From these observations we can conclude that the process is electrochemical in nature with ionic defects diffusing into the Ti strip from the lithium niobate and these defects catalyzing the dissociation of water into reactive ions.