Xiangling Tian

Versatile preparation of ultrathin MoS 2 nanosheets with reverse saturable absorption response

High-yielded ultrathin MoS2 nanosheets (UMS) with thickness below 4 nm were successfully synthesized by a simple, cost-effective and reproducible solid-state reaction method. Significant reverse saturable absorption and nonlinear refraction responses of the UMS were measured by the z-scan experiment under femtosecond pulses at 800 nm. The figure of merit is calculated to be ~2.52 × 10−15 esu cm. Furthermore, optical limiting (OL) effects of the UMS were observed with low threshold FOL ~44 mJ/cm2. These results reveal that solid-state reaction is a feasible method for the fabrication of optical nanomaterials used in nanophotonic devices including optical limiter, which can be expanded to prepare other two-dimensional nanomaterials.

Ultra-broadband nonlinear saturable absorption of high-yield MoS2 nanosheets

High-yield MoS2 nanosheets with strong nonlinear optical (NLO) responses in a broad near-infrared range were synthesized by a facile hydrothermal method. The observation of saturable absorption, which was excited by the light with photon energy smaller than the gap energy of MoS2, can be attributed to the enhancement of the hybridization between the Mo d-orbital and S p-orbital by the oxygen incorporation into MoS2. High-yield MoS2 nanosheets with high modulation depth and large saturable intensity generated a stable, passively Q-switched fiber laser pulse at 1.56 μm. The high output power of 1.08 mW can be attained under a very low pump power of 30.87 mW. Compared to recently reported passively Q-switched fiber lasers utilizing exfoliated MoS2 nanosheets, the efficiency of the laser for our passive Q-switching operation is larger and reaches 3.50%. This research may extend the understanding on the NLO properties of MoS2 and indicate the feasibility of the high-yield MoS2 nanosheets to passively Q-switched fiber laser effectively at low pump strengths.

Vertically standing layered MoS 2 nanosheets on TiO 2 nanofibers for enhanced nonlinear optical property

Vertical layered MoS₂ nanosheets rooting into TiO₂ nanofibers were successfully prepared by a facile two-step method: prefabrication of porous TiO₂ nanofibers based on an electrospinning technique, and assembly of MoS₂ ultrathin nanosheets through a simple hydrothermal reaction. Significant enhancement of nonlinear optical response of the MoS₂/TiO₂ nanocomposite was confirmed by an open-aperture z-scan measurement. The nanocomposite displayed strong optical limiting (OL) effects to ultrafast laser pulses with a low OL threshold of ~22.3 mJ/cm², which is lower than that of pristine TiO₂ nanofibers and MoS₂ nanosheets. In addition to the contribution of the strong nonlinear absorption of MoS₂ nanosheets and TiO₂ nanofibers, such phenomenon is also attributed to the unique structure of vertically standing layered MoS₂ nanosheets on TiO₂ nanofibers with a large amount of exposed edge states, large surface areas and fast electron transfer between TiO₂ and MoS₂. This work broadens our vision to engineering novel hierarchical MoS₂-based nanocomposite for efficiently enhanced nonlinear light-matter interaction.

An Ultrabroadband Mid-Infrared Pulsed Optical Switch Employing Solution-Processed Bismuth Oxyselenide

Pulsed lasers operating in the mid-infrared (3-25 µm) are increasingly becoming the light source of choice for a wide range of industrial and scientific applications such as spectroscopy, biomedical research, sensing, imaging, and communication. Up to now, one of the factors limiting the mid-infrared pulsed lasers is the lack of optical switch with a capability of pulse generation, especially for those with wideband response. Here, a semiconductor material of bismuth oxyselenide (Bi2 O2 Se) with a facile processibility, constituting an ultrabroadband saturable absorber for the mid-infrared (actually from the near-infrared to mid-infrared: 0.8-5.0 µm) is exhibited. Significantly, it is found that the optical response is associated with a strong nonlinear character, showing picosecond response time and response amplitude up to ≈330.1% at 5.0 µm. Combined with facile processibility and low cost, these solution-processed Bi2 O2 Se materials may offer a scalable and printable mid-infrared optical switch to open up the long-sought parameter space which is crucial for the exploitation of compact and high-performance mid-infrared pulsed laser sources.

Reverse Saturable Absorption Induced by Phonon-Assisted Anti-Stokes Processes

In materials showing reverse saturable absorption (RSA), optical transmittance decreases at intense laser irradiation. One approach to application of these materials is to protect the sensors or human eyes from laser damage. To date, research has mainly concentrated on thin films and suspensions of graphite and its nanostructure (including nanotubes, graphene, and graphene oxides), which are mainly used as an optical limiter for nanosecond laser pulses. Moreover, thin individual pieces of semiconductor usually exhibit increased transmittance due to saturable absorption when the laser energy (Elaser ) is higher than the band gap (EB ). Here, it is shown that indirect gap semiconductor WSe2 exhibits high RSA on exposure to a femtosecond laser under Elaser > EB near band gap excitation, which is attributed to the longitudinal optical phonon-assisted anti-Stokes transition by the annihilation of phonons and the absorption of photons. An optical limiting threshold (≈21.6 mJ cm-2 ) lower than those reported for other optical-limiting materials currently for femtosecond laser at 800 nm is observed.

Enhanced nonlinear optical response of Se-doped MoS2 nanosheets for passively Q-switched fiber laser application

An enhanced nonlinear optical (NLO) performance was observed in Se-doped MoS2 nanosheets synthesized through a facile annealing process. Se-doped MoS2 nanosheets with a large saturable intensity and high modulation depth generated stable passively Q-switched fiber laser pulses at 1559 nm. In comparison with the Q-switched fiber laser utilizing the pristine MoS2 nanosheets as a saturable absorber, the passive Q-switching operation based on Se-doped MoS2 nanosheets could be conducted at a lower threshold power of 50 mW, a wider range of repetition rates from 28.97 to 130 kHz, and a higher SNR of 56 dB. More importantly, the shortest pulse duration of 1.502 μs was realized and the output power and pulse energy reached 17.2 mW and 133.07 nJ, respectively. These results indicate that tailoring the chemical composition of optical nanomaterials by introducing a dopant is a feasible method of improving the NLO response of the MoS2 nanosheets and realizing excellent ultrafast pulse generation.