Yamujin Jang

Wafer-Scale Growth of Single-Crystal Monolayer Graphene on Reusable Hydrogen-Terminated Germanium

Smoothing Graphene Several methods have been reported for the growth of monolayer graphene into areas large enough for integration into silicon electronics. However, the electronic properties of the graphene are often degraded by grain boundaries and wrinkles. Lee et al. (p. 286, published online 3 April) showed that flat, single crystals of monolayer graphene can be grown by chemical-vapor deposition on silicon wafers covered by a germanium layer that aligns the grains. The graphene can be dry-transferred to other substrates, and the germanium layer can be reused for further growth cycles. Wafer-scale single-crystal monolayer graphene can be repeatedly grown on a hydrogen-terminated germanium (110) surface. The uniform growth of single-crystal graphene over wafer-scale areas remains a challenge in the commercial-level manufacturability of various electronic, photonic, mechanical, and other devices based on graphene. Here, we describe wafer-scale growth of wrinkle-free single-crystal monolayer graphene on silicon wafer using a hydrogen-terminated germanium buffer layer. The anisotropic twofold symmetry of the germanium (110) surface allowed unidirectional alignment of multiple seeds, which were merged to uniform single-crystal graphene with predefined orientation. Furthermore, the weak interaction between graphene and underlying hydrogen-terminated germanium surface enabled the facile etch-free dry transfer of graphene and the recycling of the germanium substrate for continual graphene growth.

Diameter-Controlled and Surface-Modified Sb 2 Se 3 Nanowires and Their Photodetector Performance

Due to its direct and narrow band gap, high chemical stability, and high Seebeck coefficient (1800 μVK−1), antimony selenide (Sb2Se3) has many potential applications, such as in photovoltaic devices, thermoelectric devices, and solar cells. However, research on the Sb2Se3 materials has been limited by its low electrical conductivity in bulk state. To overcome this challenge, we suggest two kinds of nano-structured materials, namely, the diameter-controlled Sb2Se3 nanowires and Ag2Se-decorated Sb2Se3 nanowires. The photocurrent response of diameter-controlled Sb2Se3, which depends on electrical conductivity of the material, increases non-linearly with the diameter of the nanowire. The photosensitivity factor (K = Ilight/Idark) of the intrinsic Sb2Se3 nanowire with diameter of 80–100 nm is highly improved (K = 75). Additionally, the measurement was conducted using a single nanowire under low source-drain voltage. The dark- and photocurrent of the Ag2Se-decorated Sb2Se3 nanowire further increased, as compared to that of the intrinsic Sb2Se3 nanowire, to approximately 50 and 7 times, respectively.

Epitaxial Growth of a Single-Crystal Hybridized Boron Nitride and Graphene Layer on a Wide-Band Gap Semiconductor

Vertical and lateral heterogeneous structures of two-dimensional (2D) materials have paved the way for pioneering studies on the physics and applications of 2D materials. A hybridized hexagonal boron nitride (h-BN) and graphene lateral structure, a heterogeneous 2D structure, has been fabricated on single-crystal metals or metal foils by chemical vapor deposition (CVD). However, once fabricated on metals, the h-BN/graphene lateral structures require an additional transfer process for device applications, as reported for CVD graphene grown on metal foils. Here, we demonstrate that a single-crystal h-BN/graphene lateral structure can be epitaxially grown on a wide-gap semiconductor, SiC(0001). First, a single-crystal h-BN layer with the same orientation as bulk SiC was grown on a Si-terminated SiC substrate at 850 °C using borazine molecules. Second, when heated above 1150 °C in vacuum, the h-BN layer was partially removed and, subsequently, replaced with graphene domains. Interestingly, these graphene domains possess the same orientation as the h-BN layer, resulting in a single-crystal h-BN/graphene lateral structure on a whole sample area. For temperatures above 1600 °C, the single-crystal h-BN layer was completely replaced by the single-crystal graphene layer. The crystalline structure, electronic band structure, and atomic structure of the h-BN/graphene lateral structure were studied by using low energy electron diffraction, angle-resolved photoemission spectroscopy, and scanning tunneling microscopy, respectively. The h-BN/graphene lateral structure fabricated on a wide-gap semiconductor substrate can be directly applied to devices without a further transfer process, as reported for epitaxial graphene on a SiC substrate.

Reliability enhancement of germanium nanowires using graphene as a protective layer: aspect of thermal stability.

We synthesized thermally stable graphene-covered Ge (Ge@G) nanowires and applied them in field emission devices. Vertically aligned Ge@G nanowires were prepared by sequential growth of the Ge nanowires and graphene shells in a single chamber. As a result of the thermal treatment experiments, Ge@G nanowires were much more stable than pure Ge nanowires, maintaining their shape at high temperatures up to 850 °C. In addition, field emission devices based on the Ge@G nanowires clearly exhibited enhanced thermal reliability. Moreover, field emission characteristics yielded the highest field enhancement factor (∼2298) yet reported for this type of device, and also had low turn-on voltage. Our proposed approach for the application of graphene as a protective layer for a semiconductor nanowire is an efficient way to enhance the thermal reliability of nanomaterials.

Realization of continuous Zachariasen carbon monolayer

Continuous Zachariasen carbon monolayer, a novel amorphous 2D carbon allotrope, was synthesized on germanium surface. Rapid progress in two-dimensional (2D) crystalline materials has recently enabled a range of device possibilities. These possibilities may be further expanded through the development of advanced 2D glass materials. Zachariasen carbon monolayer, a novel amorphous 2D carbon allotrope, was successfully synthesized on germanium surface. The one-atom-thick continuous amorphous layer, in which the in-plane carbon network was fully sp2-hybridized, was achieved at high temperatures (>900°C) and a controlled growth rate. We verified that the charge carriers within the Zachariasen carbon monolayer are strongly localized to display Anderson insulating behavior and a large negative magnetoresistance. This new 2D glass also exhibited a unique ability as an atom-thick interface layer, allowing the deposition of an atomically flat dielectric film. It can be adopted in conventional semiconductor and display processing or used in the fabrication of flexible devices consisting of thin inorganic layers.

Large reduction in thermal conductivity for SiGe alloy nanowire wrapped with a Ge nanoparticle-embedded SiO2 shell.

We demonstrate silicon germanium (SiGe) alloy nanowires (NWs) with Ge nanoparticles (GeNPs) embedded in a SiO2 shell as a material for decreasing thermal conductivity. During thermal oxidation of SiGe NWs to form SiGe-SiO2 core-shell structures, Ge atoms were diffused into the SiO2 shell to relax the strain in the SiGe core, and agglomerated as a few nanometer-sized particles. This structure leads to a large reduction in thermal conductivity due to the GeNP-phonon interaction, while electrical conductivity is sustained because the core of the SiGe alloy NW provides a current path for the charged carriers. The thermal conductivity of the SiGe alloy NWs wrapped with a GeNP-embedded SiO2 shell is 0.41 W m(-1) K(-1) at 300 K.