Ying Xiao

Green facile scalable synthesis of titania/carbon nanocomposites: new use of old dental resins.

A green facile scalable method inspired by polymeric dental restorative composite is developed to synthesize TiO2/carbon nanocomposites for manipulation of the intercalation potential of TiO2 as lithium-ion battery anode. Poorly crystallized TiO2 nanoparticles with average sizes of 4-6 nm are homogeneously embedded in carbon matrix with the TiO2 mass content varied between 28 and 65%. Characteristic discharge/charge plateaus of TiO2 are significantly diminished and voltage continues to change along with proceeding discharge/charge process. The tap density, gravimetric and volumetric capacities, and cyclic and rate performance of the TiO2/C composites are effectively improved.

Silicon Oxycarbide/Carbon Nanohybrids with Tiny Silicon Oxycarbide Particles Embedded in Free Carbon Matrix Based on Photoactive Dental Methacrylates

A new facile scalable method has been developed to synthesize silicon oxycarbide (SiOC)/carbon nanohybrids using difunctional dental methacrylate monomers as solvent and carbon source and the silane coupling agent as the precursor for SiOC. The content (from 100% to 40% by mass) and structure (ratio of disordered carbon over ordered carbon) of the free carbon matrix have been systematically tuned by varying the mass ratio of methacryloxypropyltrimethoxysilane (MPTMS) over the total mass of the resin monomers from 0.0 to 6.0. Compared to the bare carbon anode, the introduction of MPTMS significantly improves the electrochemical performance as a lithium-ion battery anode. The initial and cycled discharge/charge capacities of the SiOC/C nanohybrid anodes reach maximum with the MPTMS ratio of 0.50, which displays very good rate performance as well. Detailed structures and electrochemical performance as lithium-ion battery anodes have been systematically investigated. The structure-property correlation and corresponding mechanism have been discussed.

Scalable in Situ Synthesis of Li4Ti5O12/Carbon Nanohybrid with Supersmall Li4Ti5O12 Nanoparticles Homogeneously Embedded in Carbon Matrix

Li4Ti5O12 (LTO) is regarded as a promising lithium-ion battery anode due to its stable cyclic performance and reliable operation safety. The moderate rate performance originated from the poor intrinsic electron and lithium-ion conductivities of the LTO has significantly limited its wide applications. A facile scalable synthesis of hierarchical Li4Ti5O12/C nanohybrids with supersmall LTO nanoparticles (ca. 17 nm in diameter) homogeneously embedded in the continuous submicrometer-sized carbon matrix is developed. Difunctional methacrylate monomers are used as solvent and carbon source to generate TiO2/C nanohybrid, which is in situ converted to LTO/C via a solid-state reaction procedure. The structure, morphology, crystallinity, composition, tap density, and electrochemical performance of the LTO/C nanohybrid are systematically investigated. Comparing to the control sample of the commercial LTO composited with carbon, the reversible specific capacity after 1000 cycles at 175 mA g-1 and rate performance at high current densities (875, 1750, and 3500 mA g-1) of the Li4Ti5O12/C nanohybrid have been significantly improved. The enhanced electrochemical performance is due to the unique structure feature, where the supersmall LTO nanoparticles are homogeneously embedded in the continuous carbon matrix. Good tap density is also achieved with the LTO/C nanohybrid due to its hierarchical micro-/nanohybrid structure, which is even higher than that of the commercial LTO powder.

Facile Scalable Synthesis of TiO2/Carbon Nanohybrids with Ultrasmall TiO2 Nanoparticles Homogeneously Embedded in Carbon Matrix

A facile scalable synthesis of TiO2/C nanohybrids inspired by polymeric dental restorative materials has been developed, which creates ultrasmall TiO2 nanoparticles homogeneously embedded in the carbon matrix. The average size of the nanoparticles is tuned between about 1 and 5 nm with the carbon content systematically increased from 0% to 65%. Imaging analysis and a scattering technique have been applied to investigate the morphology of the TiO2 nanoparticles. The composition, nature of carbon matrix, crystallinity, and tap density of the TiO2/C nanohybrids have been studied. The application of the TiO2/C nanohybrids as lithium-ion battery anode is demonstrated. Unusual discharge/charge profiles have been exhibited, where characteristic discharge/charge plateaus of crystalline TiO2 are significantly diminished. The tap density, cyclic capacities, and rate performance at high current densities (10 C, 20 C) of the TiO2/C nanohybrid anodes have been effectively improved compared to the bare carbon anode and the TiO2/C nanohybrids with larger particle size.

Si/Ag/C Nanohybrids with in Situ Incorporation of Super-Small Silver Nanoparticles: Tiny Amount, Huge Impact

Silicon (Si) has been regarded as one of the most promising anodes for next-generation lithium-ion batteries (LIBs) due to its exceptional capacity, appropriate voltage profile, and reliable operation safety. However, poor cyclic stability and moderate rate performance have been critical drawbacks to hamper the practical application of Si-based anodes. It has been one of the central issues to develop new strategies to improve the cyclic and rate performance of the Si-based lithium-ion battery anodes. In this work, super-small metal nanoparticles (2.9 nm in diameter) are in situ synthesized and homogeneously embedded in the in situ formed nitrogen-doped carbon matrix, as demonstrated by the Si/Ag/C nanohybrid, where epoxy resin monomers are used as solvent and carbon source. With tiny amount of silver (2.59% by mass), the Si/Ag/C nanohybrid exhibits superior rate performance compared to the bare Si/C sample. Systematic structure characterization and electrochemical performance tests of the Si/Ag/C nanohybrids have been performed. The mechanism for the enhanced rate performance is investigated and elaborated. The temperature-dependent I-V behavior of the Si/Ag/C nanohybrids with tuned silver contents is measured. Based on the model, it is found that the super-small silver nanoparticles mainly increase charge carrier mobility instead of the charge carrier density in the Si/Ag/C nanohybrids. The evaluation of the total electron transportation length provided by the silver nanoparticles within the electrode also suggests significantly enhanced charge carrier mobility. The existence of tremendous amounts of super-small silver nanoparticles with excellent mechanical properties also contributes to the slightly improved cyclic stability compared to that of simple Si/C anodes.

Template-free synthesis of titania architectures with controlled morphology evolution

Template-free synthesis of TiO2 architectures with controlled morphology evolution has been developed through solvothermal reaction in 1,4-dioxane. By simply varying the molar ratio of the concentrated HCl over Titanium isopropoxide (TTIP) from 0 to 5.0, series of morphologies including nanoparticle-built microspheres, nanoparticle-built microspheres decorated with nanorods, nanorod cauliflowers, and nanorod dendrites have been obtained. The influence of several key factors on the morphology control of TiO2 has been systematically investigated. These parameters include the mass (molar) ratio of HCl/TTIP, solvothermal reaction temperature and time, acid species (concentrated nitric acid), and solvent type (tetrahydrofuran and 1,3-dioxane). The mechanism for the formation of the TiO2 architectures with controlled morphology evolution has been discussed. The application of the TiO2 architectures as water splitting photocatalyst and lithium–ion battery anode has been demonstrated. And the corresponding structure–property correlation has been discussed.

Erratum to "Porous titania/carbon hybrid microspheres templated by in situ formed polystyrene colloids" [J. Colloid Interface Sci. 469 (2016) 242-256].

Please cite this article in press as: T. Cheng et al., J. Colloid Interface Sci. (2016), http://dx.doi.org/10.1016/j.jcis.2016.05.035 Ting Cheng , Guoqiang Zhang , Yonggao Xia , Zaicheng Sun , Zhaohui Yang , Rui Liu , Senlin Xia , Ezzeldin Metwalli , Ying Xiao , Xiaoyan Wang , Meimei Wang , Jianzhen Ban , Liangtao Yang , Qing Ji , Bao Qiu , Guoxin Chen , Huifeng Chen , Yichao Lin , Xiaoying Pei , Qiang Wu, Jian-Qiang Meng , Zhaoping Liu , Liang Chen , Tonghu Xiao , Ling-Dong Sun , Chun-Hua Yan , Hans Jürgen Butt , Peter Müller-Buschbaum , Ya-Jun Cheng a,⇑