Zhe Yin

Extremely Black Vertically Aligned Carbon Nanotube Arrays for Solar Steam Generation

The unique structure of a vertically aligned carbon nanotube (VACNT) array makes it behave most similarly to a blackbody. It is reported that the optical absorptivity of an extremely black VACNT array is about 0.98-0.99 over a large spectral range of 200 nm-200 μm, inspiring us to explore the performance of VACNT arrays in solar energy harvesting. In this work, we report the highly efficient steam generation simply by laminating a layer of VACNT array on the surface of water to harvest solar energy. It is found that under solar illumination the temperature of upper water can significantly increase with obvious water steam generated, indicating the efficient solar energy harvesting and local temperature rise by the thin layer of VACNTs. We found that the evaporation rate of water assisted by VACNT arrays is 10 times that of bare water, which is the highest ratio for solar-thermal-steam generation ever reported. Remarkably, the solar thermal conversion efficiency reached 90%. The excellent performance could be ascribed to the strong optical absorption and local temperature rise induced by the VACNT layer, as well as the ultrafast water transport through the VACNT layer due to the frictionless wall of CNTs. Based on the above, we further demonstrated the application of VACNT arrays in solar-driven desalination.

Intrinsically Stretchable and Conductive Textile by a Scalable Process for Elastic Wearable Electronics

The prosperous development of stretchable electronics poses a great demand on stretchable conductive materials that could maintain their electrical conductivity under tensile strain. Previously reported strategies to obtain stretchable conductors usually involve complex structure-fabricating processes or utilization of high-cost nanomaterials. It remains a great challenge to produce stretchable and conductive materials via a scalable and cost-effective process. Herein, a large-scalable pyrolysis strategy is developed for the fabrication of intrinsically stretchable and conductive textile in utilizing low-cost and mass-produced weft-knitted textiles as raw materials. Due to the intrinsic stretchability of the weft-knitted structure and the excellent mechanical and electrical properties of the as-obtained carbonized fibers, the obtained flexible and durable textile could sustain tensile strains up to 125% while keeping a stable electrical conductivity (as shown by a Modal-based textile), thus ensuring its applications in elastic electronics. For demonstration purposes, stretchable supercapacitors and wearable thermal-therapy devices that showed stable performance with the loading of tensile strains have been fabricated. Considering the simplicity and large scalability of the process, the low-cost and mass production of the raw materials, and the superior performances of the as-obtained elastic and conductive textile, this strategy would contribute to the development and industrial production of wearable electronics.

Mineral-Templated 3D Graphene Architectures for Energy-Efficient Electrodes

3D graphene networks have shown extraordinary promise for high-performance electrochemical devices. Herein, the chemical vapor deposition synthesis of a highly porous 3D graphene foam (3D-GF) using naturally abundant calcined Iceland crystal as the template is reported. Intriguingly, the Iceland crystal transforms to CaO monolith with evenly distributed micro/meso/macropores through the releasing of CO2 at high temperature. Meanwhile, the hierarchical structure of the calcined template could be easily tuned under different calcination conditions. By precisely inheriting fine structure from the templates, the as-prepared 3D-GF possesses a tunable hierarchical porosity and low density. Thus, the hierarchical pores offer space for guest hybridization and provide an efficient pathway for ion/charge transport in typical energy conversion/storage systems. The 3D-GF skeleton electrode hybridized with Ni(OH)2 /Co(OH)2 through an optimal electrodeposition condition exhibits a high specific capacitance of 2922.2 F g-1 at a scan rate of 10 mV s-1 , and 2138.4 F g-1 at a discharge current density of 3.1 A g-1 . The hybrid 3D-GF symmetry supercapacitor shows a high energy density of 83.0 Wh kg-1 at a power density of 1011.3 W kg-1 and 31.4 Wh kg-1 at a high power density of 18 845.2 W kg-1 . The facile fabrication process enables the mass production of hierarchical porous 3D-GF for high-performance supercapacitors.

Superelastic wire-shaped supercapacitor sustaining 850% tensile strain based on carbon nanotube@graphene fiber

Stretchable and flexible supercapacitors are highly desired due to their many potential applications in wearable devices. However, it is challenging to fabricate supercapacitors that can withstand large tensile strain while maintaining high performance. Herein, we report an ultra-stretchable wire-shaped supercapacitor based on carbon nanotube@graphene@MnO2 fibers wound around a superelastic core fiber. The supercapacitor can sustain tensile strain up to 850%, which is the highest value reported for this type of device to date, while maintaining stable electrochemical performance. The energy density of the supercapacitor is 3.37 mWh·cm–3 at a power density of 54.0 mW·cm–3. The results show that 82% of the specific capacitance is retained after 1,000 stretch–release cycles with strains of 700%, demonstrating the superior durability of the elastic supercapacitor and showcasing its potential application in ultra-stretchable flexible electronics.

Splash-Resistant and Light-Weight Silk-Sheathed Wires for Textile Electronics

Silk has outstanding mechanical properties and biocompatibility. It has been used to fabricate traditional textiles for thousands of years and can be produced in large scale. Silk materials are potentially attractive in modern textile electronics. However, silk is not electrically conductive, thus limiting its applications in electronics. Moreover, regenerated silk is generally rigid and brittle, which hinder post processing. Here we report the fabrication of conductive silk wire in which carbon nanotube (CNT) yarns are wrapped with fluffy and flexible silk nanofiber films. The silk nanofiber film was prepared by electrospinning and then wrapped around a rotating CNT yarn in situ. The obtained silk-sheathed CNT (CNT@Silk) wire has an insulating sheath, which protects the body against electrical shock. In addition, the fabricated wires exhibit a high electrical conductivity (3.1 × 104 S/m), good mechanical strength (16 cN/tex), excellent flexibility, and high durability. More importantly, the wires have an extremely low density (2.0-7.8 × 104 g/m3), which is 2 orders of magnitude lower than that of the traditional metal wire (for example, Cu). Moreover, the wires display a good resistance to humidity, and a simple post treatment can make the wires splash-resistant, thereby expanding its applications. On the basis of these features, we demonstrate the use of the lightweight CNT@Silk wires in smart clothes, including electrochromism and near-field communication.

Advanced Carbon for Flexible and Wearable Electronics

Flexible and wearable electronics are attracting wide attention due to their potential applications in wearable human health monitoring and care systems. Carbon materials have combined superiorities such as good electrical conductivity, intrinsic and structural flexibility, light weight, high chemical and thermal stability, ease of chemical functionalization, as well as potential mass production, enabling them to be promising candidate materials for flexible and wearable electronics. Consequently, great efforts are devoted to the controlled fabrication of carbon materials with rationally designed structures for applications in next-generation electronics. Herein, the latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed. Various carbon materials (carbon nanotubes, graphene, natural-biomaterial-derived carbon, etc.) with controlled micro/nanostructures and designed macroscopic morphologies for high-performance flexible electronics are introduced. The fabrication strategies, working mechanism, performance, and applications of carbon-based flexible devices are reviewed and discussed, including strain/pressure sensors, temperature/humidity sensors, electrochemical sensors, flexible conductive electrodes/wires, and flexible power devices. Furthermore, the integration of multiple devices toward multifunctional wearable systems is briefly reviewed. Finally, the existing challenges and future opportunities in this field are summarized.