Adriana Simoni Lucato

Antimicrobial effect of Melaleuca alternifolia dental gel in orthodontic patients.

The aim of this study was to evaluate the antimicrobial effect and sensorial analysis of the gel developed with the essential oil of Melaleuca alternifolia. Thirty-four volunteers, divided into 2 groups, were monitored for 4 weeks. Initially, clinical biofilm (plaque index) and saliva samples (bacteria count) were collected, from which the standard values for each patient were obtained. For 7 days, group 1 used the melaleuca gel (Petite Marie/All Chemistry, São Paulo, Brazil), and group 2 used Colgate Total (S.B. Campo, São Paulo, Brazil). After 7 days, the plaque index was performed again, as well as the bacteria count and the sensorial analysis (appearance, color, odor, brightness, viscosity, and first taste sensation). The volunteers were instructed to return to their usual dental hygiene habits for 15 days. After this, group 1 started using Colgate Total, and group 2 started using the melaleuca gel, with the same evaluation procedures as the first week. The data were analyzed statistically with a significance level of 5%. In the bacteria count and clinical disclosure, the melaleuca gel was more effective in decreasing the dental biofilm and the numbers of bacteria colonies. According to the data from the sensory evaluation, Colgate Total (the control) showed better results regarding flavor and first sensation (P <0.05). We concluded that melaleuca gel is efficient in bacteria control but needs improvement in taste and first sensation.

Jarabak 's cephalometric analysis of Brazilian black patients

The treatment of skeletal disharmonies presents better results when performed during the growth period. The physical changes that occur in every individual express growth, which is ruled by genetic, general and environmental factors. In order to identify such disharmonies and hence concentrate the clinical actions during treatment and influence facial growth, cephalometrics appears as a useful a diagnostic tool for identifying facial growth patterns or growth direction. Jarabaks cephalometric analysis is used to assess facial growth pattern of subjects with normal occlusion or malocclusions. The purpose of this study was to obtain mean values for cephalometric measurements from Jarabaks cephalometric analyses of black Brazilian subjects resident in the city of Piracicaba, São Paulo state, Brazil and vicinities, who presented Class I molar relationship with normal overjet and overbite, mild or no tooth crowding or spacing, and no history of orthodontic treatment. A sample of 37 stone plaster casts and 37 lateral teleradiographs from both male and female individuals aged 10 to 14 years was evaluated. Data were analyzed statistically by Students t-test at 5% significance level. There was no significant differences between genders. The cephalometric measurements obtained in this study were similar to the Jarabaks standards, except for S-N mean value in females (66.50 mm +/- 3.16), which was significantly lower than the standard.

Effect of activation mode on shear bond strength of metallic brackets.

The aim of this study was to evaluate the shear bond strength (SBS) of metallic orthodontic brackets bonded to bovine teeth using light-activated or chemically activated composite resins. One hundred and twenty bovine mandibular incisors were divided into 6 groups (n=20), according to the bonding materials: Transbond XT (T); Enforce Dual (ED); Enforce chemical (EC); Enforce Light-activated (EL); Concise Orthodontic (C); and RelyX Unicem Capsule (UN). Metallic brackets were positioned and firmly bonded to the teeth. Light-activation for T, ED, EL and UN was carried out with four exposures on each side of the bracket with 20 s total exposure times using XL2500 (3M ESPE). EC and C were chemically cured. Next, all specimens were stored in deionized water at 37 °C for 24 h. The shear bond strength was carried out at a crosshead speed of 1.0 mm/min. Data were subjected to one-way ANOVA and Tukeys test (α=0.05). The adhesive remnant index (ARI) was evaluated at 8× magnification. C (17.72 ± 4.45) presented significantly higher SBS means (in MPa) than the other groups (p<0.05), followed by EC (11.97 ± 5.77) and ED (10.57 ± 1.32). EL (5.39 ± 1.06) and UN (4.32 ± 1.98) showed the lowest SBS means, while T (9.09 ± 2.56) showed intermediate values. For ARI, there was a predominance of score 0 for EC, C and UN, and score 3 for T, ED and EL. In conclusion, the activation mode influenced the SBS.

Dentoskeletal and aesthetic effects of mandibular protraction appliance (MPA) using Ricketts analysis

Objective: This study was designed to evaluate the skeletal, dental and soft tissue effects of mandibular deficiency treatment with the mandibular protraction appliance (MPA) using 12 factors of the Ricketts analysis. Material and method: This cross-sectional retrospective study sample consisted of a group (n = 27), with Class II malocclusion, convex facial profile, increased horizontal trespass and mandibular deficiency, with initial mean age of 12.27 and final of 15.18 years, treated with fixed appliance combined with the MPA, in an average time of 2.9 years. Initial and final radiographs were investigated using Ricketts analysis. The dependent t-test was used to compare the initial and final phases of the MPA group, with a significance level of 5%. Result: Statistically significant differences were observed for dental changes such as retrusion (p=0.000) and palatal inclination of the maxillary incisors (p=0.000); protrusion (p=0.000) and buccal inclination of the mandibular incisors (p=0.000); increased interincisal angle (p=0.002) and improved molar ratio (p=0.003). There was also a restriction of the anterior displacement of the maxilla (p=0.000) and a decrease in the mandibular plane angle (p=0.024). The variable inferior labial protrusion with significance (p=0.000), reiterated the improvement in the profile. Conclusion: The effects of MPA on correction of malocclusion Class II, verified by Ricketts analysis occurred predominantly by dentoalveolar changes, decrease in the Mandibular Plane Angle, and restriction of anterior displacement of the maxilla, which contributed to the improvement in the patient’s profile. Descriptors: Angle class II malocclusion; functional orthopedic appliance; mandibular advancement.

Influence of different treatments of the ceramic surface and thermal cycling on the bond strength of brackets to ceramic

Objective: To evaluate in vitro the effect of different treatments of the ceramic surface and thermal cycling on the shear bond strength (SBS) of metallic brackets bonded to feldspathic ceramic. Material and method: Ceramic cylinders were divided into four groups (n=4) according to the treatment of ceramic surface: G1-Clearfil Ceramic Primer silane and Transbond XT (CCPT); G2-etched with 10% hydrofluoric acid (HFA) for 60 s, CCP and Transbond XT (ACCPT); G3-etched with 10% HFA for 60 s, Ambar Adhesive and Transbond XT (AAAT); and, G4 etched with 10% HFA for 60 s, RelyX Ceramic Primer silane -RCP, adhesive primer Transbond and Transbond XT (ACPPT). Brackets were bonded to the cylinders with Transbond XT and light-activated for 40 s with LED Radii Plus. All specimens were stored in deionized water at 37 °C for 24 h, and two cylinders from each group were subject to 7,000 thermal cycles in a thermal cycler (5 °C/55 °C). After storage and thermal cycling, the SBS test was performed at a crosshead speed of 1 mm/min. Data were subjected to two-way ANOVA and Tukey’s post hoc test (α=0.05). Result: The SBS of ACCPT was significantly higher than the other groups (p<0.05). The specimens submitted to thermal cycling showed significantly lower SBS than those without thermal cycling (p<0.05), regardless the ceramic surface treatment. The ARI showed predominance of score 0 for all groups. Conclusion: Acid etching, CCP silane and Transbond XT method obtained the best results for bracket bonding. Thermal cycling reduced SBS for all groups. Score 0 was predominant for ARI in all groups. Descriptors: Shear strength; orthodontic brackets; silane; adhesive; ceramic. Sáez, Costa, Lucato et al. Rev Odontol UNESP. 2017 May-June; 46(3): 179-183 180

Debonding forces of different pads in a lingual bracket system

ABSTRACT Objective: To evaluate the shear bond strength of lingual orthodontic brackets with resin or metal pads, the location of bond failure and the adhesive remnant index (ARI). Methods: A total of 40 extracted upper premolars were randomly divided into two groups of 20 each: bonding with brackets having (1) pads with extended resin directly on the lingual surface of teeth, and (2) pads with metal custom base on the lingual surface of teeth. The debonding force was measured with an Instron universal testing machine. A Student’s t-test was used to assess the difference between groups (α = 0.05). Results: The results showed a significant difference between the groups (p < 0.001). The shear bond strength of metal pads was significantly higher than resin pads. Conclusions: Within the limitations of this in vitro study, it was concluded that the bond strength of lingual brackets with metal pads was higher than that of brackets with composite resin pads, due to the metal part being a single unit and welded. The failure location in the region between the bracket and the resin pad affected a higher percentage of the resin pads than the metal pads.

Influence of elastic chain in the degradation of orthodontic forces - in vitro study

IntroductionElastic chains are indispensable accessories in orthodontic treatment. Changes in their properties are of great interest to professionals in order to gain greater control over tooth movements.ObjectiveEvaluate the influence of trademark and length of the spacer chain on force degradation of elastic.Material and methodWe used the following elastic chain types: TP, Rocky Mountain (RMO) and GAC short, medium and long varieties. The elastics, which contained links corresponding to 12.5 mm, were tensioned between steel pins using Instron 4411 universal testing machine up to 25 mm. The value was recorded. After initial measurement of the force, the elastics were fixed on an acrylic resin plate and kept distended to 25 mm. They were inserted in a container with deionized water and kept in an incubator at 37o. The elastic force data was collected at time intervals of 24 hours, 48 hours, 7 days, 14 days, 21 days and 28 days. These records were subjected to an appropriate statistical test, with significance level of 5%.ResultTP elastics showed significantly higher force in all periods. RMO and GAC elastics showed similar elastic forces. Short and long TP elastics exhibited significantly higher strength than the average elastic chain. As regards GAC and RMO, short elastics showed higher than average force values, and higher values than the long type.ConclusionThe spacer chain and the brand influenced the results, reinforcing the importance of knowledge of different types of elastic.

Influence of bleaching and desensitizing gel on bond strength of orthodontic brackets

OBJECTIVE: The objective of this study was to assess, in vitro, the influence of bleaching gel and the use of desensitizing agent over bond strength of ceramic brackets bonded to bovine enamel. METHODS: One hundred bovine incisors were selected and randomly divided into five groups (n = 20): Group 1, control group (without bleaching); Group 2, bleached with 35% hydrogen peroxide; Group 3, bleached with 35% hydrogen peroxide (three applications, 15 minutes each) and desensitizing agent applied for 10 minutes; Group 4, bleached with 35% hydrogen peroxide for 40 minutes; Group 5, bleached with 35% hydrogen peroxide for 40 minutes with desensitizing agent applied for 10 minutes. Brackets were bonded 7 days after bleaching and submitted to shear bond strength test after 24 hours at a compression rate of 1 mm/minute. After fracture, the adhesive remnant index (ARI) was assessed under stereoscopic at 40 x magnification. Shear strength data (MPa) were submitted to one-way ANOVA and Tukeys test with significance level set at 5%. RESULTS: Group 5 (29.33 MPa) showed significantly higher bond strength than Group 1 (19.19 MPa), Group 2 (20.59 MPa) and Group 4 (23.25 MPa), but with no difference in comparison to Group 3. There was no significant difference among the other groups. The adhesive remnant index showed predominance of score 3, that is, all resin remained adhered to enamel for all groups. CONCLUSION: Bleaching with 35% hydrogen peroxide with calcium associated with desensitizing agent application produced higher bond strength values of brackets bonded to bovine enamel.

In vitro evaluation of flexural strength of different brands of expansion screws

Objective: The objective of this study was to compare the flexural strength of the stems of three maxillary expanders screws of Morelli, Forestadent and Dentaurum brands. Methods: The sample consisted of nine expander screws (totalizing of 36 stems), three from each brand, all stainless steel and 12 mm of expansion capacity. The stems of the expander screws were cut with cutting pliers close to the weld region with screw body, then fixed in a universal testing machine Instron 4411 for tests of bending resistance of three points. The ultimate strength in kgF exerted by the machine to bend the stem of the 5 mm screw was recorded and the flexural strength was calculated using a mathematical formula. During the flexural strength test it was verified the modulus of elasticity of the stems by means of Bluehill 2 software. The flexural strength data were subjected to ANOVA with one criterion and Tukey’s test, with significance level of 5%. Results: Forestadent screw brand showed the greatest bending strength, significantly higher than Dentaurum. Morelli showed the lowest resistance. Conclusion: The flexural strength of the screws varied according to the brand. Forestadent screw showed the greatest resistance and Morelli the lowest. All the three screws were found adequate for use in procedures for rapid maxillary expansion.