Aryan Navabi

High-Current Gain Two-Dimensional MoS2-Base Hot-Electron Transistors

The vertical transport of nonequilibrium charge carriers through semiconductor heterostructures has led to milestones in electronics with the development of the hot-electron transistor. Recently, significant advances have been made with atomically sharp heterostructures implementing various two-dimensional materials. Although graphene-base hot-electron transistors show great promise for electronic switching at high frequencies, they are limited by their low current gain. Here we show that, by choosing MoS2 and HfO2 for the filter barrier interface and using a noncrystalline semiconductor such as ITO for the collector, we can achieve an unprecedentedly high-current gain (α ∼ 0.95) in our hot-electron transistors operating at room temperature. Furthermore, the current gain can be tuned over 2 orders of magnitude with the collector-base voltage albeit this feature currently presents a drawback in the transistor performance metrics such as poor output resistance and poor intrinsic voltage gain. We anticipate our transistors will pave the way toward the realization of novel flexible 2D material-based high-density, low-energy, and high-frequency hot-carrier electronic applications.

Spin-torque ferromagnetic resonance measurements utilizing spin Hall magnetoresistance in W/Co40Fe40B20/MgO structures

We study the magnetic properties of W/Co40Fe40B20 (CoFeB)/MgO films using the spin-torque ferromagnetic resonance (ST-FMR) technique. This study takes the advantage of the spin Hall magnetoresistance (SMR) for generating an oscillating resistance, which is one of the necessary requirements for obtaining mixing voltage in the ST-FMR technique. We have measured both the as-grown and the annealed samples with different CoFeB layer thicknesses, which include the in-plane and out-of-plane magnetic anisotropies. The spectra for these two types of anisotropies show distinct signatures. By analyzing the ST-FMR spectra, we extract the effective anisotropy field for both types of samples. In addition, we investigate the influence of CoFeB thickness and annealing on the Gilbert damping constant. Our experiments show that by taking advantage of SMR, the ST-FMR measurement acts as an effective tool with high sensitivity for studying the magnetic properties of ultrathin magnetic films.

Deficiency of the bulk spin Hall effect model for spin-orbit torques in magnetic-insulator/heavy-metal heterostructures

Electrical currents in a magnetic insulator/heavy metal heterostructure can induce two simultaneous effects, namely, spin Hall magnetoresistance (SMR) on the heavy metal side and spin-orbit torques (SOTs) on the magnetic insulator side. Within the framework of the pure spin current model based on the bulk spin Hall effect (SHE), the ratio of the spin Hall-induced anomalous Hall effect (SH-AHE) to SMR should be equal to the ratio of the field-like torque (FLT) to damping-like torque (DLT). We perform a quantitative study of SMR, SH-AHE, and SOTs in a series of thulium iron garnet/platinum or Tm3Fe5O12/Pt heterostructures with different Tm3Fe5O12 thicknesses, where Tm3Fe5O12 is a ferrimagnetic insulator with perpendicular magnetic anisotropy. We find the ratio between measured effective fields of FLT and DLT is at least 2 times larger than the ratio of the SH-AHE to SMR. In addition, the bulk SHE model grossly underestimates the spin torque efficiency of FLT. Our results reveal deficiencies of the bulk SHE model and also address the importance of interfacial effects such as the Rashba and magnetic proximity effects in magnetic insulator/heavy metal heterostructures.

A Study of Vertical Transport through Graphene toward Control of Quantum Tunneling

Vertical integration of van der Waals (vdW) materials with atomic precision is an intriguing possibility brought forward by these two-dimensional (2D) materials. Essential to the design and analysis of these structures is a fundamental understanding of the vertical transport of charge carriers into and across vdW materials, yet little has been done in this area. In this report, we explore the important roles of single layer graphene in the vertical tunneling process as a tunneling barrier. Although a semimetal in the lateral lattice plane, graphene together with the vdW gap act as a tunneling barrier that is nearly transparent to the vertically tunneling electrons due to its atomic thickness and the transverse momenta mismatch between the injected electrons and the graphene band structure. This is accentuated using electron tunneling spectroscopy (ETS) showing a lack of features corresponding to the Dirac cone band structure. Meanwhile, the graphene acts as a lateral conductor through which the potential and charge distribution across the tunneling barrier can be tuned. These unique properties make graphene an excellent 2D atomic grid, transparent to charge carriers, and yet can control the carrier flux via the electrical potential. A new model on the quantum capacitances effect on vertical tunneling is developed to further elucidate the role of graphene in modulating the tunneling process. This work may serve as a general guideline for the design and analysis of vdW vertical tunneling devices and heterostructures, as well as the study of electron/spin injection through and into vdW materials.

Role of dimensional crossover on spin-orbit torque efficiency in magnetic insulator thin films

Magnetic insulators (MIs) attract tremendous interest for spintronic applications due to low Gilbert damping and the absence of Ohmic loss. Spin-orbit torques (SOTs) on MIs are more intriguing than magnetic metals since SOTs cannot be transferred to MIs through direct injection of electron spins. Understanding of SOTs on MIs remains elusive, especially how SOTs scale with the MI film thickness. Here, we observe the critical role of dimensionality on the SOT efficiency by studying the MI layer thickness-dependent SOT efficiency in tungsten/thulium iron garnet (W/TmIG) bilayers. We show that the TmIG thin film evolves from two-dimensional to three-dimensional magnetic phase transitions as the thickness increases. We report the significant enhancement of the measured SOT efficiency as the TmIG thickness increases, which is attributed to the increase of the magnetic moment density. We demonstrate the current-induced SOT switching in the W/TmIG bilayers with a TmIG thickness up to 15 nm.The spin-orbit torque (SOT) induced magnetic switching makes metal/magnetic insulators bilayers preferred in the energy efficient spintronic applications. Here the authors show SOT switching in W/TmIG bilayers and reveal the dimension crossover of SOT as a function of TmIG thickness.

Ultrafast and broadband graphene photodetectors based on plasmonic nanoantennas

We present an ultrafast and high responsivity graphene photodetector that operates over a broad bandwidth from visible to infrared regime. Use of plasmonic nanoantennas as photodetector contact electrodes provides a strong concentration of photo-generated carriers near the contact electrodes. As a result, a large number of the photocarriers drift to the photodetector contact electrodes despite the short carrier lifetime of graphene, providing high responsivity levels. The photodetector is also designed to offer high speed operation by minimizing capacitive parasitics. We demonstrate broadband photodetection from 800 nm to 20 μm with operation speeds exceeding 50 GHz and responsivity levels as high as 0.6 A/W at 800 nm and 11.5 A/W at 20 μm. These results are the first demonstration of high-responsivity photodetection with such a broad operation bandwidth and high speed, enabled by plasmonic nanoantennas.

Size reduction and dual mode degeneracy in microstrip patch antenna using periodically rippled silicon substrate

A novel fabrication process for periodically rippled transmission lines is presented in this paper. This technique allows for height modulation of microstrip passive components, resulting in size reduction as well as dual mode degeneracy. A 4 mm × 4 mm X-band one dimensional (1D) rippled patch antenna with 6 μm periodicity is designed and fabricated using this technique. A 26% size reduction compared to regular antennas, as well as dual-mode operation is demonstrated in measurements. The measurement results confirm the potential application of the proposed structure in the design of compact dual-band integrated devices on silicon substrates.