Ashley N. Parks
United States Environmental Protection Agency
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Ashley N. Parks.
Environmental Science & Technology | 2012
Ariette Schierz; Ashley N. Parks; Kathryn M. Washburn; G. Thomas Chandler; P. Lee Ferguson
Near infrared fluorescence (NIRF) spectroscopy is capable of sensitive and selective detection of semiconductive, single-walled carbon nanotubes (SWNT) using the unique electronic bandgap properties of these carbon allotropes. We reported here the first detection and quantitation of SWNT in sediment and biota at environmentally relevant concentrations using NIRF spectroscopy. In addition, we utilized this technique to qualitatively characterize SWNT samples before and after ecotoxicity, bioavailability and fate studies in the aquatic environment. Sample preparation prior to NIRF analysis consisted of surfactant-assisted high power ultrasonication. The bile salt sodium deoxycholate (SDC) enabled efficient extraction and disaggregation of SWNT prior to NIRF analysis. The method was validated using standard-addition experiments in two types of estuarine sediments, yielding recoveries between 66 ± 7% and 103 ± 10% depending on SWNT type and coating used, demonstrating the ability to isolate SWNT from complex sediment matrices. Instrument detection limits were determined to be 15 ng mL(-1) SWNT in 2% SDC solution and method detection limits (including a concentration step) were 62 ng g(-1) for estuarine sediment, and 1.0 μg L(-1) for water. Our work has shown that NIRF spectroscopy is highly sensitive and selective for SWNT and that this technique can be applied to track the environmental and biological fate of this important class of carbon nanomaterial in the aquatic environment.
Environmental Toxicology and Chemistry | 2013
Ashley N. Parks; Lisa M. Portis; P. Ariette Schierz; Kate M. Washburn; Monique M. Perron; Robert M. Burgess; Kay T. Ho; G. Thomas Chandler; P. Lee Ferguson
As the use of single-walled carbon nanotubes (SWNTs) increases over time, so does the potential for environmental release. This research aimed to determine the toxicity, bioavailability, and bioaccumulation of SWNTs in marine benthic organisms at the base of the food chain. The toxicity of SWNTs was tested in a whole sediment exposure with the amphipod Ampelisca abdita and the mysid Americamysis bahia. In addition, SWNTs were amended to sediment and/or food matrices to determine their bioavailability and bioaccumulation through these routes in A. abdita, A. bahia, and the estuarine amphipod Leptocheirus plumulosus. No significant mortality to any species via sediment or food matrices was observed at concentrations up to 100 ppm. A novel near-infrared fluorescence spectroscopic method was utilized to measure and characterize the body burdens of pristine SWNTs in nondepurated and depurated organisms. We did not detect SWNTs in depurated organisms but quantified them in nondepurated A. abdita fed SWNT-amended algae. After a 28-d exposure to [(14) C]SWNT-amended sediment (100 µg/g) and algae (100 µg/g), [(14) C]SWNT was detected in depurated and nondepurated L. plumulosus amphipods at 0.50 µg/g and 5.38 µg/g, respectively. The results indicate that SWNTs are bioaccessible to marine benthic organisms but do not appear to accumulate or cause toxicity.
Environmental Science & Technology | 2014
Joseph H. Bisesi; Jonathan Merten; Keira Liu; Ashley N. Parks; A. R. M. Nabiul Afrooz; J. Brad Glenn; Stephen J. Klaine; Andrew S. Kane; Navid B. Saleh; P. Lee Ferguson; Tara Sabo-Attwood
Detection of SWCNTs in complex matrices presents a unique challenge as common techniques lack spatial resolution and specificity. Near infrared fluorescence (NIRF) has emerged as a valuable tool for detecting and quantifying SWCNTs in environmental samples by exploiting their innate fluorescent properties. The objective of this study was to optimize NIRF-based imaging and quantitation methods for tracking and quantifying SWCNTs in an aquatic vertebrate model in conjunction with assessing toxicological end points. Fathead minnows (Pimephales promelas) were exposed by single gavage to SWCNTs and their distribution was tracked using a custom NIRF imaging system for 7 days. No overt toxicity was observed in any of the SWCNT treated fish; however, histopathology observations from gastrointestinal (GI) tissue revealed edema within the submucosa and altered mucous cell morphology. NIRF images showed strong SWCNT-derived fluorescence signals in whole fish and excised intestinal tissues. Fluorescence was not detected in other tissues examined, indicating that no appreciable intestinal absorption occurred. SWCNTs were quantified in intestinal tissues using a NIRF spectroscopic method revealing values that were consistent with the pattern of fluorescence observed with NIRF imaging. Results of this work demonstrate the utility of NIRF imaging as a valuable tool for examining uptake and distribution of SWCNTs in aquatic vertebrates.
Nanotoxicology | 2014
Ashley N. Parks; G. Thomas Chandler; Lisa M. Portis; Julia Sullivan; Monique M. Perron; Mark G. Cantwell; Robert M. Burgess; Kay T. Ho; P. Lee Ferguson
Abstract Adsorption of hydrophobic organic contaminants (HOCs) to black carbon is a well-studied phenomenon. One emerging class of engineered black carbon materials are single-walled carbon nanotubes (SWNTs). Little research has investigated the potential of SWNT to adsorb and sequester HOCs in complex environmental systems. This study addressed the capacity of SWNT, amended to polychlorinated biphenyl (PCB)-contaminated New Bedford Harbor (NBH) sediment, to reduce the toxicity and bioaccumulation of these HOCs to benthic organisms. Overall, SWNT amendments increased the survival of two benthic estuarine invertebrates, Americamysis bahia and Ampelisca abdita, and reduced the accumulation of PCBs to the benthic polychaete, Nereis virens. Reduction in PCB bioaccumulation by SWNT was independent of Kow. Further, passive sampling-based estimates of interstitial water concentrations indicated that SWNT reduced PCB bioavailability. Results from this study suggest that SWNT are a good adsorbent for PCBs and might be useful for remediation in the future once SWNT manufacturing technology improves and costs decrease.
Environmental Toxicology and Chemistry | 2015
Ashley N. Parks; G. Thomas Chandler; Kay T. Ho; Robert M. Burgess; P. Lee Ferguson
Little is known about environmental biodegradability or biotransformations of single-walled carbon nanotubes (SWNT). Because of their strong association with aquatic organic matter, detailed knowledge of the ultimate fate and persistence of SWNT requires investigation of possible biotransformations (i.e., biodegradation) in environmental media. In the present study, [(14)C]SWNT were utilized to track biodegradation over 6 mo by pure liquid culture of the fungus Trametes versicolor and mixed bacterial isolates from field-collected sediment or aerated wastewater treatment plant sludge. The mixed cultures were chosen as more environmentally relevant media where SWNT will likely be deposited under both aerobic and anaerobic conditions. Activity of [(14)C] was assessed in solid, aqueous, and (14)CO2 gaseous phases to determine amounts of intact SWNT, partially soluble SWNT degradation products, and mineralized SWNT, respectively, during the 6 mo of the experiment. Mass balances based on radiocarbon activity were approximately 100% over 6 mo, and no significant degradation of SWNT was observed. Approximately 99% of the [(14)C] activity remained in the solid phase, 0.8% in the aqueous phase, and less than 0.1% was mineralized to (14)CO2, regardless of culture type. These results suggest that SWNT are not readily biodegraded by pure fungal cultures or environmental microbial communities, and are likely persistent in environmental media.
Nano Letters | 2011
Sungwoo Yang; Ashley N. Parks; Stacey A. Saba; P. Lee Ferguson; Jie Liu
Double-walled carbon nanotubes (DWNTs) have recently been recognized as important members in the carbon nanotube family because they are expected to have certain unique properties. For example, DWNTs are expected to replace single-walled carbon nanotubes (SWNTs) in biomarker applications and optoelectronics if the observed luminescence from DWNTs can be verified. However, due to unavoidable byproducts, such as SWNTs, optical properties of DWNTs still remain controversial. There is an ongoing debate concerning the ability of DWNTs to exhibit photoluminescence (PL). In this report, we aim to clearly resolve this debate through the study of carefully separated DWNTs. DWNTs were successfully separated from SWNTs using density gradient ultracentrifugation. Here we clearly show that light is emitted from the inner wall of DWNTs; however, the intensity of the emission is significantly quenched. Interestingly, it was found that a very narrow range of diameters of the inner walls of DWNTs is required for PL to be observable. All other diameters led to complete PL quenching in DWNTs. In short, we have shown that both sides of the debate are correct under certain situations. The real answer to the question is that some DWNTs do emit light but most DWNTs do not.
Environmental Toxicology and Chemistry | 2018
Kay T. Ho; Lisa M. Portis; Anthony A. Chariton; Marguerite C. Pelletier; Mark G. Cantwell; David R. Katz; Michaela Cashman; Ashley N. Parks; Jeffrey G. Baguley; Nathan Conrad-Forrest; Warren S. Boothman; Todd P. Luxton; Stuart L. Simpson; Sandra Fogg; Robert M. Burgess
The widespread use of copper nanomaterials (CuNMs) as antibacterial and antifouling agents in consumer products increases the risk for metal contamination and adverse effects in aquatic environments. Information gaps exist on the potential toxicity of CuNMs in marine environments. We exposed field-collected marine meio- and macrobenthic communities to sediments spiked with micronized copper azole (MCA) using a novel method that brings intact benthic cores into the laboratory and exposes the organisms via surface application of sediments. Treatments included field and laboratory controls, 3 spiked sediments: low-MCA (51.9 mg/kg sediment), high-MCA (519 mg/kg sediment), and CuSO4 (519 mg/kg sediment). In addition, single-species acute testing was performed with both MCA and CuSO4. Our results indicate that meio- and macrofaunal assemblages exposed to High-MCA and CuSO4 treatments differed significantly from both the laboratory control and the low-MCA treatments. Differences in macrofauna were driven by decreases in 3 Podocopa ostracod species, the bivalve Gemma gemma, and the polychaetes Exogone verugera and Prionospio heterobranchia relative to the laboratory control. Differences in the meiofaunal community are largely driven by nematodes. The benthic community test results were more sensitive than the single-species test results. Findings of this investigation indicate that CuNMs represent a source of risk to marine benthic communities comparable to that of dissolved Cu. Environ Toxicol Chem 2018;37:362-375. Published 2017 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.
Environmental Toxicology and Chemistry | 2018
Ashley N. Parks; Mark G. Cantwell; David R. Katz; Michaela Cashman; Todd P. Luxton; Kay T. Ho; Robert M. Burgess
Little is known about the release of metal engineered nanomaterials (ENMs) from consumer goods, including lumber treated with micronized copper. Micronized copper is a recent form of antifouling wood preservative containing nanosized copper particles for use in pressure-treated lumber. The present study investigated the concentrations released and the release rate of total copper over the course of 133 d under freshwater, estuarine, and marine salinity conditions (0, 1, 10, and 30‰) for several commercially available pressure-treated lumbers: micronized copper azole (MCA) at 0.96 and 2.4 kg/m3 , alkaline copper quaternary (ACQ) at 0.30 and 9.6 kg/m3 , and chromated copper arsenate (CCA) at 40 kg/m3 . Lumber was tested as blocks and as sawdust. Overall, copper was released from all treated lumber samples. Under leaching conditions, total release ranged from 2 to 55% of the measured copper originally in the lumber, with release rate constants from the blocks of 0.03 to 2.71 (units per day). Generally, measured release and modeled equilibrium concentrations were significantly higher in the estuarine conditions compared with freshwater or marine salinities, whereas rate constants showed very limited differences between salinities. Furthermore, organic carbon was released during the leaching and demonstrated a significant relationship with released copper concentrations as a function of salinity. The results indicate that copper is released into estuarine/marine waters from multiple wood treatments including lumber amended with nanoparticle-sized copper. Environ Toxicol Chem 2018;37:1956-1968. Published 2018 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.
Environmental Toxicology and Chemistry | 2018
Ashley N. Parks; Mark G. Cantwell; David R. Katz; Michaela Cashman; Todd P. Luxton; Justin G. Clar; Monique M. Perron; Lisa M. Portis; Kay T. Ho; Robert M. Burgess
One application of nanocopper is as a wood-preserving pesticide in pressure-treated lumber. Recent research has shown that pressure-treated lumber amended with micronized copper azole (MCA), which contains nanosized copper, releases copper under estuarine and marine conditions. The form of copper released (i.e., ionic, nanocopper [1-100 nm in size]) is not fully understood but will affect the bioavailability and toxicity of the metal. In the present study, multiple lines of evidence, including size fractionation, ion-selective electrode electrochemistry, comparative toxicity, and copper speciation were used to determine the form of copper released from lumber blocks and sawdust. The results of all lines of evidence supported the hypothesis that ionic copper was released from MCA lumber and sawdust, with little evidence that nanocopper was released. For example, copper concentrations in size fractionations of lumber block aqueous leachates including unfiltered, 0.1 μm, and 3 kDa were not significantly different, suggesting that the form of copper released was in the size range operationally defined as dissolved. These results correlated with the ion-selective electrode data which detects only ionic copper. In addition, comparative toxicity testing resulted in a narrow range of median lethal concentrations (221-257 μg/L) for MCA lumber blocks and CuSO4 . We conclude that ionic copper was released from the nanocopper pressure-treated lumber under estuarine and marine conditions. Environ Toxicol Chem 2018;37:1969-1979. Published 2018 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.
Environmental Toxicology and Chemistry | 2018
Ashley N. Parks; Michaela A. Cashman; Monique M. Perron; Lisa M. Portis; Mark G. Cantwell; David R. Katz; Kay T. Ho; Robert M. Burgess
It is well known that copper (Cu) is toxic to marine organisms. We measured and compared the acute toxicity of several forms of Cu (including nanoCu) amended into a marine sediment with mysids and amphipods. For all the forms of Cu tested, toxicity, measured as the median lethal concentration, ranged from 708 to > 2400 mg Cu/kg (dry sediment) for mysids and 258 to 1070 mg Cu/kg (dry sediment) for amphipods. Environ Toxicol Chem 2018;37:2677-2681.