Beatrice Bacchelli

Detachment of titanium and fluorohydroxyapatite particles in unloaded endosseous implants

The shape, surface composition and morphology of orthopaedic and endosseous dental titanium implants are key factors to achieve post-surgical and long-term mechanical stability and enhance implant osteointegration. In this study a comparison was made between 12 titanium screws, plasma-spray-coated with titanium powders (TPS), and 12 screws with an additional coating of fluorohydroxyapatite (FHA-Ti). Screws were implanted in the femoral and tibial diaphyses of two mongrel sheep and removed with peri-implant tissues 12 weeks after surgery. The vibrational spectroscopic, ultrastructural and morphological analyses showed good osteointegration for both types of implants in host cortical bone. The portion of the FHA-Ti implants in contact with the medullary canal showed a wider area of newly formed peri-implant bone than that of the TPS implants. Morphological and EDAX analyses demonstrated the presence of small titanium debris in the bone medullary spaces near the TPS surface, presumably due to the friction between the host bone and the implant during insertion. Few traces of titanium were detected around FHA-Ti implants, even if smaller FHA debris were present. The present findings suggest that the FHA coating may act as a barrier against the detachment of titanium debris stored in the medullary spaces near the implant surface.

Influence of a zirconia sandblasting treated surface on peri-implant bone healing: An experimental study in sheep.

A sandblasting process with round zirconia (ZrO(2)) particles might be an alternative surface treatment to enhance the osseointegration of titanium dental implants. Our previous study on sheep compared smooth surface titanium implants (control) with implant surfaces sandblasted with two different granulations of ZrO(2). As the sandblasted surfaces proved superior, the present study further compared the ZrO(2) surface implant with other surface treatments currently employed: machined titanium (control), titanium oxide plasma sprayed (TPS) and alumina sandblasted (Al-SL) at different times after insertion (2, 4 and 12weeks). Twelve sheep were divided into three groups of four animals each and underwent implant insertion in tibia cortical bone under general anaesthesia. The implants with surrounding tissues were subjected to histology, histomorphometry, scanning electron microscopy and microhardness tests. The experimentation indicated that at 2weeks Zr-SL implants had the highest significant bone ingrowth (p<0.05) compared to the other implant surfaces, and a microhardness of newly formed bone inside the threads significantly higher than that of Ti. The present work shows that the ZrO(2) treatment produces better results in peri-implant newly formed bone than Ti and TPS processing, whereas its performance is similar to the Al-SL surface treatment.

Early healing events around titanium implant devices with different surface microtopography: a pilot study in an in vivo rabbit model.

In the present pilot study, the authors morphologically investigated sandblasted, acid-etched surfaces (SLA) at very early experimental times. The tested devices were titanium plate-like implants with flattened wide lateral sides and jagged narrow sides. Because of these implant shape and placement site, the device gained a firm mechanical stability but the largest portion of the implant surface lacked direct contact with host bone and faced a wide peri-implant space rich in marrow tissue, intentionally created in order to study the interfacial interaction between metal surface and biological microenvironment. The insertion of titanium devices into the proximal tibia elicited a sequence of healing events. Newly formed bone proceeded through an early distance osteogenesis, common to both surfaces, and a delayed contact osteogenesis which seemed to follow different patterns at the two surfaces. In fact, SLA devices showed a more osteoconductive behavior retaining a less dense blood clot, which might be earlier and more easily replaced, and leading to a surface-conditioning layer which promotes osteogenic cell differentiation and appositional new bone deposition at the titanium surface. This model system is expected to provide a starting point for further investigations which clarify the early cellular and biomolecular events occurring at the metal surface.

Correlative Microscopy of Bone in Implant Osteointegration Studies

Routine morphological analyses usually include investigations by light microscopy (LM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Each of these techniques provides specific information on tissue morphology and all the obtained results are then combined to give an in-depth morphological overview of the examined sample. The limitations of this traditional comparative microscopy lie in the fact that each technique requires a different experimental sample, so that many specimens are necessary and the combined results come from different samples. The present study describes a technical procedure of correlative microscopy, which allows us to examine the same bone section first by LM and then, after appropriate processing, by SEM or TEM. Thanks to the possibility of analyzing the same undecalcified bone sections both by LM and SEM, the approach described in the present study allows us to make very accurate evaluations of old/new bone morphology at the bone-implant interface.

Evaluation of thread pitch as a design key factor in dental implant osseointegration

Long term success and predictability of endosseous dental implants in tooth replacement treatment have became a well documented outcome and are strictly related to initial mechanical stability as a crucial prerequisite in achieving osseointegration. Various factors (original bone density, implant surface topography, implant design) influence this stability and in the present research we investigated implant design because of its critical role, particularly in low density bone. The leading hypothesis is that selecting implant design features that maximize surface area available for contact may improve mechanical anchorage and primary stability in cancellous bone. We aimed to evaluate the role of implant thread pitch as a design key parameter on osseointegration process in poor bone density and limited availability of height by comparing two different implant profiles in an animal model. ”Narrow pitch” implants (NP) with a 0.5 mm pitch and “wide pitch” implant (WP) with a 1.5 mm pitch were tested for osseointegration after 0 days, 4 and 8 weeks in a sheep iliac crest model. Biological investigations (histology and histomorphometry) as well as biomechanical tests (insertion/ removal torque test) have been performed. The data showed that initial mechanical anchorage and subsequent early endosseous integration in low density bone can be improved with a reduction of thread pitch. The greater surface area gained by decreasing thread pitch shows to increase bone to implant contact and primary stability since the implant placement. This better performance of NP profile can be appreciated even at early healing time when the subsequent biological integration results enhanced. In conclusion, these results confirm that, when primary stability is a concern, as in cancellous bone, increasing the implant surface area by using implants with smaller pitch may be beneficial.