Benjamin Gantenbein-Ritter

The effects of dynamic loading on the intervertebral disc

Loading is important to maintain the balance of matrix turnover in the intervertebral disc (IVD). Daily cyclic diurnal assists in the transport of large soluble factors across the IVD and its surrounding circulation and applies direct and indirect stimulus to disc cells. Acute mechanical injury and accumulated overloading, however, could induce disc degeneration. Recently, there is more information available on how cyclic loading, especially axial compression and hydrostatic pressure, affects IVD cell biology. This review summarises recent studies on the response of the IVD and stem cells to applied cyclic compression and hydrostatic pressure. These studies investigate the possible role of loading in the initiation and progression of disc degeneration as well as quantifying a physiological loading condition for the study of disc degeneration biological therapy. Subsequently, a possible physiological/beneficial loading range is proposed. This physiological/beneficial loading could provide insight into how to design loading regimes in specific system for the testing of various biological therapies such as cell therapy, chemical therapy or tissue engineering constructs to achieve a better final outcome. In addition, the parameter space of ‘physiological’ loading may also be an important factor for the differentiation of stem cells towards most ideally ‘discogenic’ cells for tissue engineering purpose.

Effect of limited nutrition on in situ intervertebral disc cells under simulated-physiological loading

Study Design. Whole ovine caudal intervertebral discs (IVD) were cultured in sufficient and limited nutrition under simulated-physiologic loading for 7 and 21 days. Objective. To study the effect of limited nutrition on disc cells embedded in their native tissue in short- and midterm whole organ disc culture. Summary of Background Data. Nutrient-limited induction of disc cell death in vitro has been demonstrated and is believed to be a factor in disc degeneration. Nutrient-limited cell death and its consequences, as it relates to degeneration, have not been investigated in the intact IVD. Methods. Ovine IVDs with endplates were cultured for 7 and 21 days under simulated-physiologic loading, either in media with limited (2 g/L) or sufficient (4.5 g/L) glucose concentration. Cell viability, relative gene expression, newly synthesized chondroitin sulfate content, and matrix metalloproteinase (MMP) activity were measured after culture and compared to fresh tissue. Results. In sufficient glucose media, cell viability was maintained through 7 days to 21 days of culture. In limited glucose, it dropped significantly to 62% in the anulus fibrosus and to 56% in the nucleus pulposus after 7 days and remained so until 21 days (63% in the anulus fibrosus and 52% in the nucleus pulposus). No significant differences were found between culture conditions for relative gene expression, newly synthesized chondroitin sulfate and inactive and active forms of MMP13 and MMP7. Conclusion. With this culture system, whole IVD explants could be maintained up to 21 days. Cell viability decreased to 50% to 60% under limited nutrition within days and remained so up to 3 weeks. The surviving cells did not compensate matrix production in this time frame.

The combined effects of limited nutrition and high-frequency loading on intervertebral discs with endplates.

Study Design. Whole ovine caudal intervertebral discs were cultured under simulated-physiologic or high-frequency loading and either sufficient or limited nutrition for 7 days. Objective. To study the effect of high-frequency loading under sufficient or limited glucose conditions and to investigate the additive effects of load and nutrition on cell survival, gene expression, and cell activity after 7 days of culture. Summary of Background Data. Limited nutrition and certain mechanical stimuli are generally believed to be etiologic factors for disc degeneration. Although these effects and their interactions have been demonstrated in cell culture, no investigations have been reported in entire discs. Methods. Discs were maintained in a whole organ culture bioreactor system under simulated-physiologic (0.2 Hz) or high-frequency (10 Hz) loading, in media with either limited (2 g/L) or sufficient (4.5 g/L) glucose concentration. After 7 days, cell viability, relative gene expression, newly synthesized chondroitin sulfate content, glycosaminoglycan synthesis rate, and disc morphology were assessed after culture and compared with fresh tissue. Results. Culture under either limited glucose or high-frequency loading conditions led to a significant drop in cell viability. Combined treatment with limited glucose and high-frequency loading resulted in an additive increase in cell death in both the anulus fibrosus and nucleus pulposus and in an increase in MMP13 gene expression. Conclusion. Supporting in vivo studies and cell culture experiments, high-frequency loading simulating vibration conditions shows detrimental effects on intervertebral disc cells in whole organ culture. The effect on cell viability was exacerbated by limited nutrition culture. However, neither frequency nor limited glucose affected cell metabolism, measured by glycosaminoglycan synthesis rate. Longer culture periods may be required to detect changes at the extracellular matrix level.

Biological Response of the Intervertebral Disc to Repetitive Short-Term Cyclic Torsion

Study Design. In vitro study of the biological response of the intervertebral disc (IVD) to cyclic torsion by using bovine caudal IVDs. Objective. To evaluate the biological response of the IVD to repetitive cyclic torsion of varying magnitudes at a physiological frequency. Summary of Background Data. Mechanical loading is known to be a risk factor for disc degeneration (DD) but the role of torsion in DD is controversial. It has been suggested that a small magnitude of spinal rotation decreases spinal pressure, increases spinal length, and enhances nutrition exchange in the IVD. However, athletes who participate actively in sports involving torsional movement of the spine are frequently diagnosed with DD and/or disc prolapse. Methods. Bovine caudal discs with end plates were harvested and kept in custom-made chambers for in vitro culture and mechanical stimulation. Torsion was applied to the explants for 1 hour/day over four consecutive days by using a servohydraulic testing machine. The biological response was evaluated by cell viability, metabolic activity, gene expression, glycosaminoglycan content, and histological evaluation. Results. A significantly higher cell viability was found in the inner annulus of the 2˚ torsion group than in the static control group. A trend of decreasing metabolic activity in the nucleus pulposus with increasing torsion magnitude was observed. Apoptotic activity in the nucleus pulposus significantly increased with 5˚ torsion. No statistical significant difference in gene expression was found between the three torsion angles. No visible change in matrix organization could be observed by histological evaluation. Conclusion. The IVD can tolerate short-term repetitive cyclic torsion, as tested in this study. A small angle of cyclic torsion can be beneficial to the IVD in organ culture, possibly by improving nutrition and waste exchange, whereas large torsion angle may cause damage to disc in the long term.

Papain-induced in vitro disc degeneration model for the study of injectable nucleus pulposus therapy

BACKGROUND CONTEXT Proteolytic enzyme digestion of the intervertebral disc (IVD) offers a method to simulate a condition of disc degeneration for the study of cell-scaffold constructs in the degenerated disc. PURPOSE To characterize an in vitro disc degeneration model (DDM) of different severities of glycosaminoglycans (GAG) and water loss by using papain, and to determine the initial response of the human mesenchymal stem cells (MSCs) introduced into this DDM. STUDY DESIGN Disc degeneration model of a bovine disc explant with an end plate was induced by the injection of papain at various concentrations. Labeled MSCs were later introduced in this model. METHODS Phosphate-buffered saline (PBS control) or papain in various concentrations (3, 15, 30, 60, and 150 U/mL) were injected into the bovine caudal IVD explants. Ten days after the injection, GAG content of the discs was evaluated by dimethylmethylene blue assay and cell viability was determined by live/dead staining together with confocal microscopy. Overall matrix composition was evaluated by histology, and water content was visualized by magnetic resonance imaging. Compressive and torsional stiffness of the DDM were also recorded. In the second part, MSCs were labeled with a fluorescence cell membrane tracker and injected into the nucleus of the DDM or a PBS control. Mesenchymal stem cell viability and distribution were evaluated by confocal microscopy. RESULTS A large drop of GAG and water content of the bovine disc were obtained by injecting >30 U/mL papain. Magnetic resonance imaging showed Grade II, III, and IV disc degeneration by injecting 30, 60, and 150 U/mL papain. A cavity in the center of the disc could facilitate later injection of the nucleus pulposus tissue engineering construct while retaining an intact annulus fibrosus. The remaining disc cell viability was not affected. Mesenchymal stem cells injected into the protease-treated DDM disc showed significantly higher cell viability than when injected into the PBS-injected control disc. CONCLUSIONS By varying the concentration of papain for injection, an increasing amount of GAG and water loss could be induced to simulate the different severities of disc degeneration. MSC suspension introduced into the disc has a very low short-term survival. However, it should be clear that this bovine IVD DDM does not reflect a clinical situation but offers exciting possibilities to test novel tissue engineering protocols.

Region Specific Response of Intervertebral Disc Cells to Complex Dynamic Loading: An Organ Culture Study Using a Dynamic Torsion-Compression Bioreactor

The spine is routinely subjected to repetitive complex loading consisting of axial compression, torsion, flexion and extension. Mechanical loading is one of the important causes of spinal diseases, including disc herniation and disc degeneration. It is known that static and dynamic compression can lead to progressive disc degeneration, but little is known about the mechanobiology of the disc subjected to combined dynamic compression and torsion. Therefore, the purpose of this study was to compare the mechanobiology of the intervertebral disc when subjected to combined dynamic compression and axial torsion or pure dynamic compression or axial torsion using organ culture. We applied four different loading modalities [1. control: no loading (NL), 2. cyclic compression (CC), 3. cyclic torsion (CT), and 4. combined cyclic compression and torsion (CCT)] on bovine caudal disc explants using our custom made dynamic loading bioreactor for disc organ culture. Loads were applied for 8 h/day and continued for 14 days, all at a physiological magnitude and frequency. Our results provided strong evidence that complex loading induced a stronger degree of disc degeneration compared to one degree of freedom loading. In the CCT group, less than 10% nucleus pulposus (NP) cells survived the 14 days of loading, while cell viabilities were maintained above 70% in the NP of all the other three groups and in the annulus fibrosus (AF) of all the groups. Gene expression analysis revealed a strong up-regulation in matrix genes and matrix remodeling genes in the AF of the CCT group. Cell apoptotic activity and glycosaminoglycan content were also quantified but there were no statistically significant differences found. Cell morphology in the NP of the CCT was changed, as shown by histological evaluation. Our results stress the importance of complex loading on the initiation and progression of disc degeneration.

Accuracy of Three Techniques to Determine Cell Viability in 3D Tissues or Scaffolds

Several different assays are commonly used to evaluate survival of cells inside tissues or three-dimensional carriers, but their accuracy and reliability have not been evaluated. Here, we compare three methods for cell viability (CV) determination: (i) lactate dehydrogenase (LDH) staining on cryosections, (ii) calcein AM/ethidium homodimer-1 (CaAM/EthH) staining, and (iii) carrier digestion and trypan blue (TB) assay. Living and dead cell populations were generated from bovine chondrocytes and combined to produce approximately 0%, 25%, 50%, 75%, and 100% CV mixtures. CV ratios were measured with TB assay (MIX) before seeding cells into fibrin carriers. CV was then determined using the three methods (n = 5/method). Custom-written macros were used to process LDH- and CaAM/EthH-stained images, and hand counting with hemocytometer was used for the TB method. Absolute error and intraclass correlation (ICC) were used for accuracy and reliability evaluation. All methods estimated CV values close to MIX values. TB method was the most accurate (ICC = 0.99) followed by CaAM/EthH (ICC = 0.98) and LDH (ICC = 0.97). As for absolute quantification of living and dead cells, TB and LDH methods performed well (ICC = 0.75-0.96), whereas CaAM/EthH largely overestimated cell numbers (living, ICC = 0.30; dead, ICC = 0.30). Although TB was the most accurate, LDH and CaAM/EthH provide valuable information on cell shape and spatial distribution of cells in tissue or a scaffold.

Cryopreserved intervertebral disc with injected bone marrow-derived stromal cells: a feasibility study using organ culture

BACKGROUND CONTEXT A recent clinical study demonstrated that cryopreserved allogeneic intervertebral disc transplantation relieved pain and preserved motion, thus opening up a new treatment option for degenerative disc disease. However, these transplanted discs continued to degenerate, possibly due to a lack of viable cells. Bone marrow-derived stromal cell (BMSC) implantation has been shown to delay disc degeneration. PURPOSE This study examined the viability over time of endogenous and injected BMSCs in cryopreserved disc under simulated-physiological loading conditions. STUDY DESIGN/ SETTING: An in vitro study of BMSCs injected into cryopreserved bovine caudal discs. METHODS Bovine caudal discs were harvested and cryopreserved at -196 degrees C. After thawing, PKH-26-labeled BMSCs embedded in peptide hydrogel carrier were injected into the nucleus pulposus. Two BMSC injection quantities, that is, 1x10(5) and 2.5x10(5) were examined. Discs with injected cells were maintained in a bioreactor for 7 days under simulated-physiological loading. Cell viability (staining), gene expression (reverse transcription-polymerase chain reaction) profile, and proteoglycan content (histologically) were evaluated. RESULTS Forty percent of endogenous cell viability was maintained after freeze thawing. Over the 7-day culture, this did not change further. However, there was upregulation of Col1a2 and Mmp-13 and downregulation of Col2a1gene expression. Sixty percent of BMSCs survived the initial injection procedure, and only 20% remained alive after 7 days of culture. Bone marrow-derived stromal cell implantation did not alter the viability of the endogenous cells, but discs injected with 1x105 BMSCs showed significantly higher ACAN expression than sham discs. CONCLUSIONS Although only 40% of cells survived cryopreservation, these endogeneous cells continued to survive over 7 days if maintained under simulated-physiological loading conditions. Although only a small portion of injected BMSCs survived, they did have some effect on the matrix protein gene expression profile. Their influence on native cells requires long-term evaluation.

Nonviral Gene Delivery of Growth and Differentiation Factor 5 to Human Mesenchymal Stem Cells Injected into a 3D Bovine Intervertebral Disc Organ Culture System

Intervertebral disc (IVD) cell therapy with unconditioned 2D expanded mesenchymal stem cells (MSC) is a promising concept yet challenging to realize. Differentiation of MSCs by nonviral gene delivery of growth and differentiation factor 5 (GDF5) by electroporation mediated gene transfer could be an excellent source for cell transplantation. Human MSCs were harvested from bone marrow aspirate and GDF5 gene transfer was achieved by in vitro electroporation. Transfected cells were cultured as monolayers and as 3D cultures in 1.2% alginate bead culture. MSC expressed GDF5 efficiently for up to 21 days. The combination of GDF5 gene transfer and 3D culture in alginate showed an upregulation of aggrecan and SOX9, two markers for chondrogenesis, and KRT19 as a marker for discogenesis compared to untransfected cells. The cells encapsulated in alginate produced more proteoglycans expressed in GAG/DNA ratio. Furthermore, GDF5 transfected MCS injected into an IVD papain degeneration organ culture model showed a partial recovery of the GAG/DNA ratio after 7 days. In this study we demonstrate the potential of GDF5 transfected MSC as a promising approach for clinical translation for disc regeneration.

A papain-induced disc degeneration model for the assessment of thermo-reversible hydrogel-cells therapeutic approach.

Nucleus pulposus (NP) regeneration by the application of injectable cell‐embedded hydrogels is an appealing approach for tissue engineering. We investigated a thermo‐reversible hydrogel (TR‐HG), based on a modified polysaccharide with a thermo‐reversible polyamide [poly(N‐isopropylacrylamide), pNIPAM], which is made to behave as a liquid at room temperature and hardens at > 32 °C. In order to test the hydrogel, a papain‐induced bovine caudal disc degeneration model (PDDM), creating a cavity in the NP, was employed. Human mesenchymal stem cells (hMSCs) or autologous bovine NP cells (bNPCs) were seeded in TR‐HG; hMSCs were additionally preconditioned with rhGDF‐5 for 7 days. Then, TR‐HG was reversed to a fluid and the cell suspension injected into the PDDM and kept under static loading for 7 days. Experimental design was: (D1) fresh disc control + PBS injection; (D2) PDDM + PBS injection; (D3) PDDM + TR‐HG (material control); (D4) PDDM + TR‐HG + bNPCs; (D5) PDDM + TR‐HG + hMSCs. Magnetic resonance imaging performed before and after loading, on days 9 and 16, allowed imaging of the hydrogel‐filled PDDM and assessment of disc height and volume changes. In gel‐injected discs the NP region showed a major drop in volume and disc height during culture under static load. The RT–PCR results of injected hMSCs showed significant upregulation of ACAN, COL2A1, VCAN and SOX9 during culture in the disc cavity, whereas the gene expression profile of NP cells remained unchanged. The cell viability of injected cells (NPCs or hMSCs) was maintained at over 86% in 3D culture and dropped to ~72% after organ culture. Our results underline the need for load‐bearing hydrogels that are also cyto‐compatible. Copyright