DongJoo Joung

Analyses of Water Samples From the Deepwater Horizon Oil Spill: Documentation of the Subsurface Plume

Monitoring and M A Record-Breakin Geophysical Mon Copyright 2011 b 10.1029/2011GM Surface and subsurface water samples were collected in the vicinity of the Deepwater Horizon (DWH) wellhead in the Gulf of Mexico. Samples were extracted with dichloromethane and analyzed for a toxic component, polycyclic aromatic hydrocarbons (PAHs), using total scanning fluorescence (TSF) and by gas chromatography/mass spectrometry (GC/MS). An aliquot of fresh, floating oil from a surface sample was used as a DWH oil reference standard. Twelve of 19 samples collected from 24 May 2010 to 6 June 2010 on the R/V Walton Smith cruise contained TSF maximum intensities above background (0.7 μg L 1 based on 1 L sample size). These 12 samples had total petroleum hydrocarbon (TPH) concentrations as measured by quantitative gas chromatography flame ionization detector (FID) ranging from 2 to 442 μg L . Quantitative GC/MS analysis of these 12 samples resulted in total PAH concentrations ranging from 0.01 to 59 μg L . Low molecular weight, more water-soluble naphthalene and alkylated naphthalene dominated the PAH composition patterns for 11 of the 12 water samples. Sample 12 exhibited substantially reduced concentrations of naphthalenes relative to other PAH compounds. The total PAH concentrations were positively correlated (R = 0.80) with the TSF maximum intensity (MI). TSF is a simple, rapid technique providing an accurate prediction of the amount of PAH present in a sample. TSFderived estimates of the relative contribution of PAH present in the oil provided evidence that PAH represented ~10% of the higher molecular weight TPH. The subsurface oil plume was confirmed by the analyses of discrete water samples for TSF, TPH, and PAH.

Trace Element Distributions in the Water Column near the Deepwater Horizon Well Blowout

To understand the impact of the Deepwater Horizon well blowout on dissolved trace element concentrations, samples were collected from areas around the oil rig explosion site during four cruises in early and late May 2010, October 2010, and October 2011. In surface waters, Ba, Fe, Cu, Ni, Mn, and Co were relatively well correlated with salinity during all cruises, suggesting mixing with river water was the main influence on metal distributions in these waters. However, in deep oil/gas plumes (1000-1400 m depth), modestly elevated concentrations of Co and Ba were observed in late May, compared with postblowout conditions. Analysis of the oil itself along with leaching experiments confirm the oil as the source of the Co, whereas increased Ba was likely due to drilling mud used in the top kill attempt. Deep plume dissolved Mn largely reflected natural benthic input, though some samples showed slight elevation probably associated with the top kill. Dissolved Fe concentrations were low and also appeared largely topographically controlled and reflective of benthic input. Estimates suggest that microbial Fe demand may have affected the Fe distribution but probably not to the extent of Fe becoming a growth-limiting factor. Experiments showed that the dispersant can have some limited impact on dissolved-particulate metal partitioning.

Nutrient depletion as a proxy for microbial growth in Deepwater Horizon subsurface oil/gas plumes

The Deepwater Horizon accident resulted in a substantial uncontrolled hydrocarbon release to the northern Gulf of Mexico, much of which was entrained in deep submerged plumes. While bio-degradation of the hydrocarbons has been inferred from microbial biomass and genetics, the amount of conversion of oil and gas carbon to biomass remains uncertain having only been estimated in modeling studies. Here we examine correlated depletions of nitrate, phosphate and oxygen in the submerged plumes and conclude that a substantial portion of hydrocarbons in these plumes was converted to biomass (0.8?2???1010?mol C). This contrasts with nutrient-limited surface waters where other work has suggested hydrocarbon-induced microbial growth to have been minimal. Our results suggest the need for better monitoring of changes in nutrients as well as study of nutrient recycling in similar future hydrocarbon releases.

NIUST - Deepwater horizon oil spill response cruise

In May 2010, the National Institute for Undersea Science and Technology (NIUST) had a 17-day research cruise aboard the UNOLS vessel R/V Pelican scheduled. NIUST is a partnership of the University of Mississippi, the University of Southern Mississippi and NOAA. Before sailing, the Deepwater Horizon oil platform burned and sank, resulting in an uncontrolled oil spill at a depth of 5000 ft at Mississippi Canyon Block 252. Subsequently, the decision was made to abort the planned hydrate and ship wreck research in favor of an oil spill response. The primary goals of the redefined cruise were to acquire baseline and early impact data for seafloor sediments and subsurface distribution of oil and gas hydrates as close as possible in time and space to the origin of the oil spill. Investigating an oil spill nearly a mile deep in the ocean presents special benthic sampling and subsurface oil detection challenges. NIUSTs AUVs were unloaded from the ship and a larger main winch installed to allow operation of a large box corer for collecting sediment samples in water depths up to 2000 m. During the first five-day leg of the cruise, a total of 28 box cores were collected. The Pelican returned to port (Cocodrie, LA) to drop off sediment and water samples for immediate analyses, and to take on more sampling gear and supplies for the second leg of the cruise, including an Acrobat, a CDOM fluorometer, a Video Ray ROV, and a C02 sensor in addition to the already installed CTD Rosette with 02 sensor and light transmissometer. During Leg 2, box core samples were collected until weather prohibited safe operations. CTD stations were plotted to cover the area surrounding the wreck site and at various depths to cover the water column in order to map the subsurface water column structure and chemistry as baseline values for future investigations and especially to look for submerged oil and/or gas hydrates. Early in the water column sampling, a subsurface feature was discovered at 1200 to 1400 m depth. This layer was detected by three independent sensors, CDOM (colored dissolved organic matter) fluorometer, light transmissometer, and oxygen sensor. All three instruments responded in unison with greater fluorescence and beam attenuation and decreased 02 concentration. These signals were first observed at a station 5 miles from the accident site. Second and third station measurements, exactly half the distance to the spill site from the previous one, at 2.5 miles, and at 1.25 miles, showed the same signal but with significantly greater magnitude. Following this discovery, the sampling plan for the remaining days of the cruise was changed to map the newly discovered feature. This paper will discuss methods, pursuit of leads, gear and instrumentation utilized, resulting in the initial discovery of deep hydrocarbon plume features resulting from the uniquely deep oil spill.

Aqueous Mesocosm Techniques Enabling the Real-Time Measurement of the Chemical and Isotopic Kinetics of Dissolved Methane and Carbon Dioxide

Previous studies of microbially mediated methane oxidation in oceanic environments have examined the many different factors that control the rates of oxidation. However, there is debate on what factor(s) are limiting in these types of environments. These factors include the availability of methane, O2, trace metals, nutrients, the density of cell population, and the influence that CO2 production may have on pH. To look at this process in its entirety, we developed an automated mesocosm incubation system with a Dissolved Gas Analysis System (DGAS) coupled to a myriad of analytical tools to monitor chemical changes during methane oxidation. Here, we present new high temporal resolution techniques for investigating dissolved methane and carbon dioxide concentrations and stable isotopic dynamics during aqueous mesocosm and pure culture incubations. These techniques enable us to analyze the gases dissolved in solution and are nondestructive to both the liquid media and the analyzed gases enabling the investigation of a mesocosm or pure culture experiment in a completely closed system, if so desired.