Golam Haider

Highly Stretchable and Sensitive Photodetectors Based on Hybrid Graphene and Graphene Quantum Dots

Stretchable devices possess great potential in a wide range of applications, such as biomedical and wearable gadgets and smart skin, which can be integrated with the human body. Because of their excellent flexibility, two-dimensional (2D) materials are expected to play an important role in the fabrication of stretchable devices. However, only a limited number of reports have been devoted to investigating stretchable devices based on 2D materials, and the stretchabilities were restricted in a very small strain. Moreover, there is no report related to the stretchable photodetectors derived from 2D materials. Herein, we demonstrate a highly stretchable and sensitive photodetector based on hybrid graphene and graphene quantum dots (GQDs). A unique rippled structure of poly(dimethylsiloxane) is used to support the graphene layer, which can be stretched under an external strain far beyond published reports. The ripple of the device can overcome the native stretchability limit of graphene and enhance the carrier generation in GQDs due to multiple reflections of photons between the ripples. Our strategy presented here can be extended to many other material systems, including other 2D materials. It therefore paves a key step for the development of stretchable electronics and optical devices.

Electrically Driven White Light Emission from Intrinsic Metal–Organic Framework

Light-emitting diodes (LEDs) have drawn tremendous potential as a replacement of traditional lighting due to its low-power consumption and longer lifetime. Nowadays, the practical white LEDs (WLED) are contingent on the photon down-conversion of phosphors containing rare-earth elements, which limits its utility, energy, and cost efficiency. In order to resolve the energy crisis and to address the environmental concerns, designing a direct WLED is highly desirable and remains a challenging issue. To circumvent the existing difficulties, in this report, we have designed and demonstrated a direct WLED consisting of a strontium-based metal-organic framework (MOF), {[Sr(ntca)(H2O)2]·H2O}n (1), graphene, and inorganic semiconductors, which can generate a bright white light emission. In addition to the suitable design of a MOF structure, the demonstration of electrically driven white light emission based on a MOF is made possible by the combination of several factors including the unique properties of graphene and the appropriate band alignment between the MOF and semiconductor layer. Because electroluminescence using a MOF as an active material is very rare and intriguing and a direct WLED is also not commonly seen, our work here therefore represents a major discovery which should be very useful and timely for the development of solid-state lighting.

Semiconductor Behavior of a Three-Dimensional Strontium-Based Metal–Organic Framework

The self-assembly of a three-dimensional strontium-based metal-organic framework [Sr(Hbtc)(H2O)]n (1) was achieved through the reaction of Sr(NO3)2 with a 1,2,4-benzenetricarboxylic acid (1,2,4-H3btc) ligand under hydrothermal conditions. This Sr-based metal-organic framework exhibits remarkable semiconducting behavior, as evidenced by theoretical calculations and experimental measurements. Temperature-dependent DC conductivity, near-room-temperature AC conductivity, diffuse reflection spectra, and photoluminescence spectra provide strong proof that compound 1 shows a band gap of 2.3 eV, which is comparable to that for other commonly available semiconducting materials (e.g., CdSe, CdTe, ZnTe, GaP, etc.). The optimized molecular structure and electronic properties (density of states and band gap energy) of 1 were calculated using density functional theory, and the results are consistent with experimental findings. This is the first report on the semiconducting properties of a strontium-based MOF, which will pave the way for further studies in semiconducting MOFs with interesting potential applications in optoelectronic devices.

Wrinkled 2D Materials: A Versatile Platform for Low-Threshold Stretchable Random Lasers

A stretchable, flexible, and bendable random laser system capable of lasing in a wide range of spectrum will have many potential applications in next- generation technologies, such as visible-spectrum communication, superbright solid-state lighting, biomedical studies, fluorescence, etc. However, producing an appropriate cavity for such a wide spectral range remains a challenge owing to the rigidity of the resonator for the generation of coherent loops. 2D materials with wrinkled structures exhibit superior advantages of high stretchability and a suitable matrix for photon trapping in between the hill and valley geometries compared to their flat counterparts. Here, the intriguing functionalities of wrinkled reduced graphene oxide, single-layer graphene, and few-layer hexagonal boron nitride, respectively, are utilized to design highly stretchable and wearable random laser devices with ultralow threshold. Using methyl-ammonium lead bromide perovskite nanocrystals (PNC) to illustrate the working principle, the lasing threshold is found to be ≈10 µJ cm-2 , about two times less than the lowest value ever reported. In addition to PNC, it is demonstrated that the output lasing wavelength can be tuned using different active materials such as semiconductor quantum dots. Thus, this study is very useful for the future development of high-performance wearable optoelectronic devices.

Continuous broadband emission from a metal–organic framework as a human-friendly white light source

Natural white light emission from a single component, a novel strontium(II)-based metal–organic framework, {[Sr(ntca)(H2O)2]·H2O}n (1) was achieved. Compound 1 exhibited a remarkable continuous broadband emission with the highest sensitivity at around 550 nm, making it more physically comfortable for the human eye. The continuous spectrum of compound 1 also closely resembles the sunlight spectrum with a CCT of 5451 K, producing a natural white light. An alkaline earth metal (Sr) is used as the metal node in the preparation of the compound which is more environmentally friendly as compared with commonly used lanthanides in luminescent materials. This natural white light emitter with a pleasant effect on human visibility, and without any doping of lanthanide promises to open up new perspectives for the development of high-performance solid-state lighting sources.

Dirac point induced ultralow-threshold laser and giant optoelectronic quantum oscillations in graphene-based heterojunctions

The occurrence of zero effective mass of electrons at the vicinity of the Dirac point is expected to create new paradigms for scientific research and technological applications, but the related discoveries are rather limited. Here, we demonstrate that a simple architecture composed of graphene quantum dots sandwiched by graphene layers can exhibit several intriguing features, including the Dirac point induced ultralow-threshold laser, giant peak-to-valley ratio (PVR) with ultra-narrow spectra of negative differential resistance and quantum oscillations of current as well as light emission intensity. In particular, the threshold of only 12.4 nA cm−2 is the lowest value ever reported on electrically driven lasers, and the PVR value of more than 100 also sets the highest record compared with all available reports on graphene-based devices. We show that all these intriguing phenomena can be interpreted based on the unique band structures of graphene quantum dots and graphene as well as resonant quantum tunneling.In graphene, electrons possess zero effective mass in proximity to the Dirac point, an unusual feature that could trigger the development of novel photonic devices. Here, the authors combine graphene quantum dots with two graphene layers and observe laser action with ultralow threshold.

A White Random Laser

Random laser with intrinsically uncomplicated fabrication processes, high spectral radiance, angle-free emission, and conformal onto freeform surfaces is in principle ideal for a variety of applications, ranging from lighting to identification systems. In this work, a white random laser (White-RL) with high-purity and high-stability is designed, fabricated, and demonstrated via the cost-effective materials (e.g., organic laser dyes) and simple methods (e.g., all-solution process and self-assembled structures). Notably, the wavelength, linewidth, and intensity of White-RL are nearly isotropic, nevertheless hard to be achieved in any conventional laser systems. Dynamically fine-tuning colour over a broad visible range is also feasible by on-chip integration of three free-standing monochromatic laser films with selective pumping scheme and appropriate colour balance. With these schematics, White-RL shows great potential and high application values in high-brightness illumination, full-field imaging, full-colour displays, visible-colour communications, and medical biosensing.

Low Threshold Lasing from 2D Homologous Organic-Inorganic Hybrid Ruddlesden-Popper Perovskite Single-Crystals

Organic-inorganic hybrid two-dimensional (2D) perovskites have recently attracted great attention in optical and optoelectronic applications due to their inherent natural quantum-well structure. We report the growth of high-quality millimeter-sized single crystals belonging to homologous two-dimensional (2D) hybrid organic-inorganic Ruddelsden-Popper perovskites (RPPs) of (BA)2(MA) n-1Pb nI3 n+1 ( n = 1, 2, and 3) by a slow evaporation at a constant-temperature (SECT) solution-growth strategy. The as-grown 2D hybrid perovskite single crystals exhibit excellent crystallinity, phase purity, and spectral uniformity. Low-threshold lasing behaviors with different emission wavelengths at room temperature have been observed from the homologous 2D hybrid RPP single crystals. Our result demonstrates that solution-growth homologous organic-inorganic hybrid 2D perovskite single crystals open up a new window as a promising candidate for optical gain media.

Graphene based multiple heterojunctions as an effective approach for high-performance gas sensing

We develop graphene-based multiple heterojunctions to realize sensors with a very high sensitivity (<10 ppm), ultra-fast sensing time (<10 ms), and stable repeatability. The sensing mechanism solely depends on the large change in the Fermi energy (EF) of graphene resulting from the absorbed molecules, which produces a large change in the output current across the heterojunction. The charge induced by the absorbed molecules remains in the graphene layer without transferring into the underlying layer owing to the well-designed band alignment among the constituent materials, which results in ultra-fast and highly sensitive performance. Furthermore, we demonstrate that with different polarities of external bias, the graphene multiple-junction sensors can be used to selectively detect different gases. In addition to the suitable band alignment, the high performance of our device arises from the sandwich structure of top and bottom electrodes, which enables to exponentially enhance the current across the Schott...

Transient and Flexible Hyperbolic Metamaterials on Freeform Surfaces

Transient technology is deemed as a paramount breakthrough for its particular functionality that can be implemented at a specific time and then totally dissolved. Hyperbolic metamaterials (HMMs) with high wave-vector modes for negative refraction or with high photonic density of states to robustly enhance the quantum transformation efficiency represent one of the emerging key elements for generating not-yet realized optoelectronics devices. However, HMMs has not been explored for implementing in transient technology. Here we show the first attempt to integrate transient technology with HMMs, i.e., transient HMMs, composed of multilayers of water-soluble and bio-compatible polymer and metal. We demonstrate that our newly designed transient HMMs can also possess high-k modes and high photonic density of states, which enables to dramatically enhance the light emitter covered on top of HMMs. We show that these transient HMMs devices loss their functionalities after immersing into deionized water within 5 min. Moreover, when the transient HMMs are integrated with a flexible substrate, the device exhibits an excellent mechanical stability for more than 3000 bending cycles. We anticipate that the transient HMMs developed here can serve as a versatile platform to advance transient technology for a wide range of application, including solid state lighting, optical communication, and wearable optoelectronic devices, etc.