Hae-Wook Yoo

Tunable Volatile Organic Compounds Sensor by Using Thiolated Ligand Conjugation on MoS2

One of the most important issues in the development of gas sensors for breath analysis is the fabrication of gas sensor arrays that possess different responses for recognizing patterns for volatile organic compounds (VOCs). Here, we develop a high-performance chemiresistor with a tunable sensor response and high sensitivity for representative VOC groups by using molybdenum disulfide (MoS2) and by conjugating a thiolated ligand (mercaptoundecanoic acid (MUA)) to MoS2 surface. Primitive and MUA-conjugated MoS2 sensing channels exhibit distinctly different sensor responses toward VOCs. In particular, the primitive MoS2 sensor presents positive responses for oxygen-functionalized VOCs, while the MUA-conjugated MoS2 sensor presents negative responses for the same analytes. Such characteristic sensor responses demonstrate that ligand conjugation successfully adds functionality to a MoS2 matrix. Thus, this will be a promising approach to constructing a versatile sensor array, by conjugating a wide variety of thiolated ligands on the MoS2 surface. Furthermore, these MoS2 sensors in this study exhibit high sensitivity to representative VOCs down to a concentration of 1 ppm. This approach to fabricating a tunable and sensitive VOC sensor may lead to a valuable real-world application for lung cancer diagnosis by breath analysis.

Highly Enhanced Gas Adsorption Properties in Vertically Aligned MoS2 Layers

In this work, we demonstrate that gas adsorption is significantly higher in edge sites of vertically aligned MoS2 compared to that of the conventional basal plane exposed MoS2 films. To compare the effect of the alignment of MoS2 on the gas adsorption properties, we synthesized three distinct MoS2 films with different alignment directions ((1) horizontally aligned MoS2 (basal plane exposed), (2) mixture of horizontally aligned MoS2 and vertically aligned layers (basal and edge exposed), and (3) vertically aligned MoS2 (edge exposed)) by using rapid sulfurization method of CVD process. Vertically aligned MoS2 film shows about 5-fold enhanced sensitivity to NO2 gas molecules compared to horizontally aligned MoS2 film. Vertically aligned MoS2 has superior resistance variation compared to horizontally aligned MoS2 even with same surface area exposed to identical concentration of gas molecules. We found that electrical response to target gas molecules correlates directly with the density of the exposed edge sites of MoS2 due to high adsorption of gas molecules onto edge sites of vertically aligned MoS2. Density functional theory (DFT) calculations corroborate the experimental results as stronger NO2 binding energies are computed for multiple configurations near the edge sites of MoS2, which verifies that electrical response to target gas molecules (NO2) correlates directly with the density of the exposed edge sites of MoS2 due to high adsorption of gas molecules onto edge sites of vertically aligned MoS2. We believe that this observation extends to other 2D TMD materials as well as MoS2 and can be applied to significantly enhance the gas sensor performance in these materials.

Superior Chemical Sensing Performance of Black Phosphorus: Comparison with MoS2 and Graphene.

Superior chemical sensing performance of black phosphorus (BP) is demonstrated by comparison with MoS2 and graphene. Dynamic sensing measurements of multichannel detection show that BP displays highly sensitive, selective, and fast-responsive NO2 sensing performance compared to the other representative 2D sensing materials.

High-Resolution p-Type Metal Oxide Semiconductor Nanowire Array as an Ultrasensitive Sensor for Volatile Organic Compounds

The development of high-performance volatile organic compound (VOC) sensor based on a p-type metal oxide semiconductor (MOS) is one of the important topics in gas sensor research because of its unique sensing characteristics, namely, rapid recovery kinetics, low temperature dependence, high humidity or thermal stability, and high potential for p-n junction applications. Despite intensive efforts made in this area, the applications of such sensors are hindered because of drawbacks related to the low sensitivity and slow response or long recovery time of p-type MOSs. In this study, the VOC sensing performance of a p-type MOS was significantly enhanced by forming a patterned p-type polycrystalline MOS with an ultrathin, high-aspect-ratio (∼25) structure (∼14 nm thickness) composed of ultrasmall grains (∼5 nm size). A high-resolution polycrystalline p-type MOS nanowire array with a grain size of ∼5 nm was fabricated by secondary sputtering via Ar(+) bombardment. Various p-type nanowire arrays of CuO, NiO, and Cr2O3 were easily fabricated by simply changing the sputtering material. The VOC sensor thus fabricated exhibited higher sensitivity (ΔR/Ra = 30 at 1 ppm hexane using NiO channels), as well as faster response or shorter recovery time (∼30 s) than that of previously reported p-type MOS sensors. This result is attributed to the high resolution and small grain size of p-type MOSs, which lead to overlap of fully charged zones; as a result, electrical properties are predominantly determined by surface states. Our new approach may be used as a route for producing high-resolution MOSs with particle sizes of ∼5 nm within a highly ordered, tall nanowire array structure.

Two‐Photon Excited Fluorescence Enhancement for Ultrasensitive DNA Detection on Large‐Area Gold Nanopatterns

Ultrasensitive DNA detection using enhanced two-photon excited fluorescence: DNA detection systems formed on a highly regular gold nanopattern over a large area show enhanced sensitivity from high to ultralow concentrations (similar to 10-11 M, see figure) target molecules. The observed two-photon excited fluorescence on the gold patterned surface is enhanced over two orders of magnitude compared with the molecules on the glass surface.

Highly Enhanced Fluorescence Signals of Quantum Dot-Polymer Composite Arrays Formed by Hybridization of Ultrathin Plasmonic Au Nanowalls.

Enhancement of the fluorescence intensity of quantum dot (QD)-polymer nanocomposite arrays is an important issue in QD studies because of the significant reduction of fluorescence signals of such arrays due to nonradiative processes in densely packed polymer chains in solid films. In this study, we enhance the fluorescence intensity of such arrays without significantly reducing their optical transparency. Enhanced fluorescence is achieved by hybridizing ultrathin plasmonic Au nanowalls onto the sidewalls of the arrays via single-step patterning and hybridization. The plasmonic Au nanowall induces metal-enhanced fluorescence, resulting in a maximum 7-fold enhancement of the fluorescence signals. We also prepare QD nanostructures of various shapes and sizes by controlling the dry etching time. In the near future, this facile approach can be used for fluorescence enhancement of colloidal QDs with plasmonic hybrid structures. Such structures can be used as optical substrates for imaging applications and for fabrication of QD-LED devices.

Tunable Volatile-Organic-Compound Sensor by Using Au Nanoparticle Incorporation on MoS2

Controlling the charge concentrations of two-dimensional (2D) materials is a critical requirement for realizing versatility and potential application of these materials in high-performance electronics and sensors. In order to exploit the novel chemical-sensing characteristics of 2D materials for sensitive and selective sensors, various functionalization methods are needed to ensure efficient doping of channels based on 2D materials. In the present study, the gas-sensing performance of MoS2 has been significantly enhanced by controlled Au nanoparticle functionalization. By using the difference in reduction potential between the Au precursor and MoS2 work functions, MoS2 prepared by chemical exfoliation process was decorated with nanoparticles with sizes of tens of nanometers. The n-doping effect of Au nanoparticles was observed, that is, these particles were found to have facilitated in electron charge transfer from Au to MoS2. The controlled n-doping effect enables the tuning of the sensing of hydrocarbon-based volatile organic compounds (VOCs) and oxygen-functionalized compounds by MoS2. A significant step has therefore been made with this study toward solving the limitations imposed by previous MoS2-based sensors, which mostly produce a single response to various VOC analytes. This controllable chemical doping process for tuning the VOC-sensing performance of MoS2 can eventually be used in early detection using multichannel sensing systems that have different responses and recognize patterns for target analytes.

Surface plasmon assisted high performance top-illuminated polymer solar cells with nanostructured Ag rear electrodes

Highly efficient plasmonic Ag rear electrodes in top-illuminated PSCs employing MoO3/Ag (13 nm)/MoO3 stacks as top transparent electrodes were successfully demonstrated, resulting in the significant enhancement of solar cell performance with a PCE of up to 7.18%. The hemispherical Ag nanostructured arrays effectively concentrate incident light within the photoactive layer in addition to contributing to extended stability with a robust structure.

The fabrication of highly ordered silver nanodot patterns by platinum assisted nanoimprint lithography

Silver has been widely used for optical sensing and imaging applications which benefit from localized surface plasmon resonance (LSPR) in a nanoscale configuration. Many attempts have been made to fabricate and control silver nanostructures in order to improve the high performance in sensing and other applications. However, a fatal mechanical weakness of silver and a lack of durability in oxygen-rich conditions have disrupted the manufacturing of reproducible nanostructures by the top-down lithography approach. In this study, we suggest a steady fabrication strategy to obtain highly ordered silver nanopatterns that are able to provide tunable LSPR characteristics. By using a protecting layer of platinum on a silver surface in the lithography process, we successfully obtained large-area (2.7 × 2.7 mm(2)) silver nanopatterns with high reproducibility. This large-area silver nanopattern was capable of enhancing the low concentration of a Cy3 fluorescence signal (∼10(-10) M) which was labeled with DNA oligomers.

Ultrafast Interfacial Self-Assembly of 2D Transition Metal Dichalcogenides Monolayer Films and Their Vertical and In-Plane Heterostructures.

Cost effective scalable method for uniform film formation is highly demanded for the emerging applications of 2D transition metal dichalcogenides (TMDs). We demonstrate a reliable and fast interfacial self-assembly of TMD thin films and their heterostructures. Large-area 2D TMD monolayer films are assembled at air-water interface in a few minutes by simple addition of ethyl acetate (EA) onto dilute aqueous dispersions of TMDs. Assembled TMD films can be directly transferred onto arbitrary nonplanar and flexible substrates. Precise thickness controllability of TMD thin films, which is essential for thickness-dependent applications, can be readily obtained by the number of film stacking. Most importantly, complex structures such as laterally assembled 2D heterostructures of TMDs can be assembled from mixture solution dispersions of two or more different TMDs. This unusually fast interfacial self-assembly could open up a novel applications of 2D TMD materials with precise tunability of layer number and film structures.