Hisashi Tadakuma

Microscopic analysis of polymerization dynamics with individual actin filaments.

The polymerization–depolymerization dynamics of actin is a key process in a variety of cellular functions. Many spectroscopic studies have been performed in solution, but studies on single actin filaments have just begun. Here, we show that the time course of polymerization of individual filaments consists of a polymerization phase and a subsequent steady-state phase. During the steady-state phase, a treadmilling process of elongation at the barbed end and shortening at the pointed end occurs, in which both components of the process proceed at approximately the same rate. The time correlation of length fluctuation of the filaments in the steady-state phase showed that the polymerization–depolymerization dynamics follow a diffusion (stochastic) process, which cannot be explained by simple association and dissociation of monomers at both ends of the filaments.

Single-molecule observation of protein-protein interactions in the chaperonin system.

We have analyzed the dynamics of the chaperonin (GroEL)–cochaperonin (GroES) interaction at the single-molecule level. In the presence of ATP and non-native protein, binding of GroES to the immobilized GroEL occurred at a rate that is consistent with bulk kinetics measurements. However, the release of GroES from GroEL occurred after a lag period (∼3 s) that was not recognized in earlier bulk-phase studies. This observation suggests a new kinetic intermediate in the GroEL–GroES reaction pathway.

Characterization of single actomyosin rigor bonds: load dependence of lifetime and mechanical properties.

Load dependence of the lifetime of the rigor bonds formed between a single myosin molecule (either heavy meromyosin, HMM, or myosin subfragment-1, S1) and actin filament was examined in the absence of nucleotide by pulling the barbed end of the actin filament with optical tweezers. For S1, the relationship between the lifetime (tau) and the externally imposed load (F) at absolute temperature T could be expressed as tau(F) = tau(0).exp(-F.d/k(B)T) with tau(0) of 67 s and an apparent interaction distance d of 2.4 nm (k(B) is the Boltzmann constant). The relationship for HMM was expressed by the sum of two exponentials, with two sets of tau(0) and d being, respectively, 62 s and 2.7 nm, and 950 s and 1.4 nm. The fast component of HMM coincides with tau(F) for S1, suggesting that the fast component corresponds to single-headed binding and the slow component to double-headed binding. These large interaction distances, which may be a common characteristic of motor proteins, are attributed to the geometry for applying an external load. The pulling experiment has also allowed direct estimation of the number of myosin molecules interacting with an actin filament. Actin filaments tethered to a single HMM molecule underwent extensive rotational Brownian motion, indicating a low torsional stiffness for HMM. From these results, we discuss the characteristics of interaction between actin and myosin, with the focus on the manner of binding of myosin.

GroEL Mediates Protein Folding with a Two Successive Timer Mechanism

GroEL encapsulates nonnative substrate proteins in a central cavity capped by GroES, providing a safe folding cage. Conventional models assume that a single timer lasting approximately 8 s governs the ATP hydrolysis-driven GroEL chaperonin cycle. We examine single molecule imaging of GFP folding within the cavity, binding release dynamics of GroEL-GroES, ensemble measurements of GroEL/substrate FRET, and the initial kinetics of GroEL ATPase activity. We conclude that the cycle consists of two successive timers of approximately 3 s and approximately 5 s duration. During the first timer, GroEL is bound to ATP, substrate protein, and GroES. When the first timer ends, the substrate protein is released into the central cavity and folding begins. ATP hydrolysis and phosphate release immediately follow this transition. ADP, GroES, and substrate depart GroEL after the second timer is complete. This mechanism explains how GroES binding to a GroEL-substrate complex encapsulates the substrate rather than allowing it to escape into solution.

Rapid and sensitive detection method of a bacterium by using a GFP reporter phage.

A rapid, sensitive, and convenient method for detecting a specific bacterium was developed by using a GFP phage. Here we describe a model system that utilizes the temperate Escherichia coli‐restricted bacteriophage lambda, which was genetically modified to express a reporter gene for GFP to identify the colon bacillus E. coli in the specimen. E. coli infected with GFP phage was detected by GFP fluorescence after 4–6 hr of incubation. The results show that a few bacteria in a specimen can be detected under fluorescence microscopy equipped with a sensitive cooled CCD camera. When E. coli and Mycobacterium smegmatis were mixed in a solution containing GFP phage, only E. coli was infected, indicating the specificity of this method. The method has the following advantages: 1) Bacteria from biological samples need not be purified unless they contain fluorescent impurities; 2) The infection of GFP phage to bacteria is specific; 3) The fluorescence of GFP within infected bacteria enables highly sensitive detection; 4) Exogenous substrates and cofactors are not required for fluorescence. Therefore this method is suitable for any phage‐bacterium system when bacteria‐specific phages are available.

Defining fundamental steps in the assembly of the Drosophila RNAi enzyme complex

Small RNAs such as small interfering RNAs (siRNAs) and microRNAs (miRNAs) silence the expression of their complementary target messenger RNAs via the formation of effector RNA-induced silencing complexes (RISCs), which contain Argonaute (Ago) family proteins at their core. Although loading of siRNA duplexes into Drosophila Ago2 requires the Dicer-2–R2D2 heterodimer and the Hsc70/Hsp90 (Hsp90 also known as Hsp83) chaperone machinery, the details of RISC assembly remain unclear. Here we reconstitute RISC assembly using only Ago2, Dicer-2, R2D2, Hsc70, Hsp90, Hop, Droj2 (an Hsp40 homologue) and p23. By following the assembly of single RISC molecules, we find that, in the absence of the chaperone machinery, an siRNA bound to Dicer-2–R2D2 associates with Ago2 only transiently. The chaperone machinery extends the dwell time of the Dicer-2–R2D2–siRNA complex on Ago2, in a manner dependent on recognition of the 5′-phosphate on the siRNA guide strand. We propose that the chaperone machinery supports a productive state of Ago2, allowing it to load siRNA duplexes from Dicer-2–R2D2 and thereby assemble RISC.

Nucleocytoplasmic transport of fluorescent mRNA in living mammalian cells: nuclear mRNA export is coupled to ongoing gene transcription

In eukaryotic cells, export of mRNA from the nucleus to the cytoplasm is one of the essential steps in gene expression. To examine mechanisms involved in the nucleocytoplasmic transport of mRNA, we microinjected fluorescently labeled fushi tarazu (ftz) pre‐mRNA into the nuclei of HeLa cells. The injected intron‐containing ftz pre‐mRNA was distributed to the SC35 speckles and exported to the cytoplasm after splicing by an energy‐requiring active process. In contrast, the injected intron‐less ftz mRNA was diffusely distributed in the nucleus and then presumably degraded. Interestingly, export of the ftz pre‐mRNA was inhibited by treatment with transcriptional inhibitors (actinomycin D, α‐amanitin or DRB). Cells treated with transcriptional inhibitor showed foci enriched with the injected mRNA, which localize side by side with SC35 speckles. Those nuclear foci, referred to as TIDRs (transcriptional‐inactivation dependent RNA domain), do not overlap with paraspeckles. In addition, in situ hybridization analysis revealed that the export of endogenous poly(A)+ mRNA is also affected by transcriptional inactivation. These results suggest that nuclear mRNA export is coupled to ongoing gene transcription in mammalian cells.

Facilitated release of substrate protein from prefoldin by chaperonin

Prefoldin is a chaperone that captures a protein‐folding intermediate and transfers it to the group II chaperonin for correct folding. However, kinetics of interactions between prefoldin and substrate proteins have not been investigated. In this study, dissociation constants and dissociation rate constants of unfolded proteins with prefoldin were firstly measured using fluorescence microscopy. Our results suggest that binding and release of prefoldin from hyperthermophilic archaea with substrate proteins were in a dynamic equilibrium. Interestingly, the release of substrate proteins from prefoldin was facilitated when chaperonin was present, supporting a handoff mechanism of substrate proteins from prefoldin to the chaperonin.

Strain through the neck linker ensures processive runs: a DNA-kinesin hybrid nanomachine study

The motor protein kinesin has two heads and walks along microtubules processively using energy derived from ATP. However, how kinesin heads are coordinated to generate processive movement remains elusive. Here we created a hybrid nanomachine (DNA‐kinesin) using DNA as the skeletal structure and kinesin as the functional module. Single molecule imaging of DNA‐kinesin hybrid allowed us to evaluate the effects of both connect position of the heads (N, C‐terminal or Mid position) and sub‐nanometer changes in the distance between the two heads on motility. Our results show that although the native structure of kinesin is not essential for processive movement, it is the most efficient. Furthermore, forward bias by the power stroke of the neck linker, a 13‐amino‐acid chain positioned at the C‐terminus of the head, and internal strain applied to the rear of the head through the neck linker are crucial for the processive movement. Results also show that the internal strain coordinates both heads to prevent simultaneous detachment from the microtubules. Thus, the inter‐head coordination through the neck linker facilitates long‐distance walking.

Real time monitoring of endogenous cytoplasmic mRNA using linear antisense 2′-O-methyl RNA probes in living cells

Visualization and monitoring of endogenous mRNA in the cytoplasm of living cells promises a significant comprehension of refined post-transcriptional regulation. Fluorescently labeled linear antisense oligonucleotides can bind to natural mRNA in a sequence-specific way and, therefore, provide a powerful tool in probing endogenous mRNA. Here, we investigated the feasibility of using linear antisense probes to monitor the variable and dynamic expression of endogenous cytoplasmic mRNAs. Two linear antisense 2′-O-methyl RNA probes, which have different interactive fluorophores at the 5′-end of one probe and at the 3′-end of the other, were used to allow fluorescence resonance energy transfer (FRET) upon hybridization to the target mRNA. By characterizing the formation of the probe-mRNA hybrids in living cells, we found that the probe composition and concentration are crucial parameters in the visualization of endogenous mRNA with high specificity. Furthermore, rapid hybridization (within 1 min) of the linear antisense probe enabled us to visualize dynamic processes of endogenous c-fos mRNA, such as fast elevation of levels after gene induction and the localization of c-fos mRNA in stress granules in response to cellular stress. Thus, our approach provides a basis for real time monitoring of endogenous cytoplasmic mRNA in living cells.