Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where M. M. A. Yajadda is active.

Publication


Featured researches published by M. M. A. Yajadda.


Nanoscale | 2011

Controlled synthesis of a large fraction of metallic single-walled carbon nanotube and semiconducting carbon nanowire networks

Z. J. Han; Samuel Yick; I. Levchenko; Eugene Tam; M. M. A. Yajadda; Shailesh Kumar; P.J. Martin; Scott A. Furman; K. Ostrikov

Controlled synthesis of both single-walled carbon nanotube and carbon nanowire networks using the same CVD reactor and Fe/Al(2)O(3) catalyst by slightly altering the hydrogenation and temperature conditions is demonstrated. Structural, bonding and electrical characterization using SEM, TEM, Raman spectroscopy, and temperature-dependent resistivity measurements suggest that the nanotubes are of a high quality and a large fraction (well above the common 33% and possibly up to 75%) of them are metallic. On the other hand, the carbon nanowires are amorphous and semiconducting and feature a controlled sp(2)/sp(3) ratio. The growth mechanism which is based on the catalyst nanoisland analysis by AFM and takes into account the hydrogenation and temperature control effects explains the observed switch-over of the nanostructure growth modes. These results are important to achieve the ultimate control of chirality, structure, and conductivity of one-dimensional all-carbon networks.


Journal of Chromatography A | 2014

Single-walled carbon nanotube-based polymer monoliths for the enantioselective nano-liquid chromatographic separation of racemic pharmaceuticals☆

Marwa Ahmed; M. M. A. Yajadda; Zhao Jun Han; Dawei Su; Guoxiu Wang; K. Ostrikov; Ashraf Ghanem

Single-walled carbon nanotubes were encapsulated into different polymer-based monolithic backbones. The polymer monoliths were prepared via the copolymerization of 20% monomers, glycidyl methacrylate, 20% ethylene glycol dimethacrylate and 60% porogens (36% 1-propanol, 18% 1,4-butanediol) or 16.4% monomers (16% butyl methacrylate, 0.4% sulfopropyl methacrylate), 23.6% ethylene glycol dimethacrylate and 60% porogens (36% 1-propanol, 18% 1,4-butanediol) along with 6% single-walled carbon nanotubes aqueous suspension. The effect of single-walled carbon nanotubes on the chiral separation of twelve classes of pharmaceutical racemates namely; α- and β-blockers, antiinflammatory drugs, antifungal drugs, dopamine antagonists, norepinephrine-dopamine reuptake inhibitors, catecholamines, sedative hypnotics, diuretics, antihistaminics, anticancer drugs and antiarrhythmic drugs was investigated. The enantioselective separation was carried out under multimodal elution to explore the chiral recognition capabilities of single-walled carbon nanotubes using reversed phase, polar organic and normal phase chromatographic conditions using nano-liquid chromatography. Baseline separation was achieved for celiprolol, chlorpheniramine, etozoline, nomifensine and sulconazole under multimodal elution conditions. Satisfactory repeatability was achieved through run-to-run, column-to-column and batch-to-batch investigations. Our findings demonstrate that single-walled carbon nanotubes represent a promising stationary phase for the chiral separation and may open the field for a new class of chiral selectors.


Journal of Applied Physics | 2012

Electron transport in discontinuous gold films and the effect of Coulomb blockade and percolation

K.-H. Müller; M. M. A. Yajadda

Understanding the electron transport in disordered assemblies of weakly coupled nano-sized metal clusters is important for many applications. Here, we investigate experimentally and theoretically the electron transport properties of metal cluster assemblies in the form of discontinuous gold films. Discontinuous films of different average island size are produced by sputter deposition, and the resistance and the non-linear current-voltage (I-V) characteristics of the films are measured as a function of temperature. To interpret the experimental electron transport data, a conduction percolation model is employed where broad probability distributions for both the tunnel junction gaps and the Coulomb blockade energies are used. Excellent agreement between experimental data and model calculations is found. In particular, the non-Arrhenius resistive behavior, the I-V power-law behavior, and the I-V characteristics at large bias voltage are all shown to be due to a conduction percolation mechanism governing diso...


Journal of Physics D | 2011

Self-organization in arrays of surface-grown nanoparticles: characterization, control, driving forces

I. Levchenko; Shailesh Kumar; M. M. A. Yajadda; Z. J. Han; Scott A. Furman; K. Ostrikov

Some important issues related to the self-organization in the arrays of nanoparticles on solid surfaces exposed to the low-temperature plasma are analysed and discussed. The available tools for the characterization of the size and position uniformity in nanoarrays are examined. The technique capable of revealing the realistic adsorbed atom and adsorbed radical capture zone pattern based on the surface physics is indicated as the most promising characterization tool. The processes responsible for the self-organization are analysed, the main driving forces of the self-organization are discussed, and possible ways to control the self-organization by controlling the plasma parameters are introduced. A view on the possible ways to further improve the methods of nanoarray characterization and self-organization is presented as well.


Applied Physics Letters | 2010

Hierarchical multilevel arrays of self-assembled gold nanoparticles: Control of resistivity-temperature dependence

M. M. A. Yajadda; I. Levchenko; Z. J. Han; K. Ostrikov

The possibility to control the electric resistivity-temperature dependence of the nanosized resistive components made using hierarchical multilevel arrays of self-assembled gold nanoparticles prepared by multiple deposition/annealing is demonstrated. It is experimentally shown that the hierarchical three-level patterns, where the nanoparticles of sizes ranging from several nanometers to several tens of nanometer play a competitive roles in the electric conductivity, demonstrate sharp changes in the activation energy. These patterns can be used for the precise tuning of the resistivity-temperature behavior of nanoelectronic components.


Chirality | 2014

Organic/Hybrid Nanoparticles and Single‐Walled Carbon Nanotubes: Preparation Methods and Chiral Applications

Haysem Alhassen; Vijy Antony; Ashraf Ghanem; M. M. A. Yajadda; Zhao Jun Han; K. Ostrikov

Nanoparticles are molecular-sized solids with at least one dimension measuring between 1-100 nm or 10-1000 nm depending on the individual disciplines perspective. They are aggregates of anywhere from a few hundreds to tens of thousands of atoms which render them larger than molecules but smaller than bulk solids. Consequently, they frequently exhibit physical and chemical properties somewhere between. On the other hand, nanocrystals are a special class of nanoparticles which have started gaining attention recently owing to their unique crystalline structures which provide a larger surface area and promising applications including chiral separations. Hybrid nanoparticles are supported by the growing interest of chemists, physicists, and biologists, who are researching to fully exploit them. These materials can be defined as molecular or nano-composites with mixed (organic or bio) and inorganic components, where at least one of the component domain has a dimension ranging from a few Å to several nanometers. Similarly, and due to their extraordinary physical, chemical, and electrical properties, single-walled carbon nanotubes have been the subject of intense research. In this short review, the focus is mainly on the current well-established simple preparation techniques of chiral organic and hybrid nanoparticles as well as single-walled carbon nanotubes and their applications in separation science. Of particular interest, cinchonidine, chitosan, and β-CD-modified gold nanoparticles (GNPs) are discussed as model examples for organic and hybrid nanoparticles. Likewise, the chemical vapor deposition method, used in the preparation of single-walled carbon nanotubes, is discussed. The enantioseparation applications of these model nanomaterials is also presented.


Journal of Applied Physics | 2011

Gold nanoresistors with near-constant resistivity in the cryogenic-to-room temperature range

M. M. A. Yajadda; I. Levchenko; K. Ostrikov

Using a multiple plasma deposition-annealing (MDA) technique, we have fabricated an Au nanoisland-based thin film nanoresistor with a very low temperature coefficient of electrical resistivity in a cryogenic-to-room temperature range of 10 to 300 K. The nanoislanded gold film was deposited on a SiO2/Si wafer (500 nm SiO2 thickness) between two 300 nm thick Au electrodes which were separated by 100 m. A sophisticated selection of the thickness of the nanoislanded gold film, the annealing temperature, as well as the number of deposition/annealing cycles resulted in the fabrication of a nanoresistor with a temperature coefficient of electrical resistivity of 2.1 × 10−3 K−1 and the resistivity deviation not exceeding 2% in a cryogenic-to-room temperature range. We have found that the constant resistivity regime of the nanoisland-based thin film nanoresistor corresponds to a minimized nanoisland activation energy (approximately 0.3 meV). This energy can be minimized by reducing the nearest neighbor distance an...


IEEE Transactions on Plasma Science | 2011

Different Nanostructures From Different Plasmas: Nanoflowers and Nanotrees on Silicon

K. Ostrikov; Shailesh Kumar; Qijin Cheng; Amanda E. Rider; M. M. A. Yajadda; Z. J. Han; Dong Han Seo; T. van der Laan; Samuel Yick; Eugene Tam; I. Levchenko

Using the advanced radio-frequency plasma-assisted magnetron deposition system, various nanostructures such as nanoflowers of carbon nanotubes, ZnO nanobelts, and silicon nanotrees were successfully synthesized. In this paper, we present the photographs of ICP and magnetron discharges, the photograph of a complex plasma structure, and the SEM images of various nanostructures synthesized in the system with magnetron and ICP sources operating simultaneously.


Journal of Applied Physics | 2014

Calculating electronic tunnel currents in networks of disordered irregularly shaped nanoparticles by mapping networks to arrays of parallel nonlinear resistors

M. M. A. Yajadda

We have shown both theoretically and experimentally that tunnel currents in networks of disordered irregularly shaped nanoparticles (NPs) can be calculated by considering the networks as arrays of parallel nonlinear resistors. Each resistor is described by a one-dimensional or a two-dimensional array of equal size nanoparticles that the tunnel junction gaps between nanoparticles in each resistor is assumed to be equal. The number of tunnel junctions between two contact electrodes and the tunnel junction gaps between nanoparticles are found to be functions of Coulomb blockade energies. In addition, the tunnel barriers between nanoparticles were considered to be tilted at high voltages. Furthermore, the role of thermal expansion coefficient of the tunnel junction gaps on the tunnel current is taken into account. The model calculations fit very well to the experimental data of a network of disordered gold nanoparticles, a forest of multi-wall carbon nanotubes, and a network of few-layer graphene nanoplates o...


Applied Physics Letters | 2013

Thermal effect of plasmon oscillations on the tunnel current in gold nanoisland thin film at low laser intensity

M. M. A. Yajadda; K. Ostrikov

The effect of plasmon oscillations on the DC tunnel current in a gold nanoisland thin film (GNITF) is investigated using low intensity P ∼ 1 W/cm2 continuous wave lasers. While DC voltages (1–150 V) were applied to the GNITF, it was irradiated with lasers at different wavelengths (λ = 473, 532, and 633 nm). Because of plasmon oscillations, the tunnel current increased. It is found that the tunnel current enhancement is mainly due to the thermal effect of plasmon oscillations rather than other plasmonic effects. The results are highly relevant to applications of plasmonic effects in opto-electronic devices.

Collaboration


Dive into the M. M. A. Yajadda's collaboration.

Top Co-Authors

Avatar

K. Ostrikov

Queensland University of Technology

View shared research outputs
Top Co-Authors

Avatar

I. Levchenko

Commonwealth Scientific and Industrial Research Organisation

View shared research outputs
Top Co-Authors

Avatar

Z. J. Han

Commonwealth Scientific and Industrial Research Organisation

View shared research outputs
Top Co-Authors

Avatar

Samuel Yick

Commonwealth Scientific and Industrial Research Organisation

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

K.-H. Müller

Commonwealth Scientific and Industrial Research Organisation

View shared research outputs
Top Co-Authors

Avatar

Scott A. Furman

Commonwealth Scientific and Industrial Research Organisation

View shared research outputs
Researchain Logo
Decentralizing Knowledge