Mateus Rodrigues Tonetto

Effect of fluoride solutions on the shear bond strength of orthodontic brackets

The aim of this in vitro study was to evaluate the shear bond strength of brackets after pre-treatment with different fluoride solutions. This study used 48 freshly extracted sound bovine incisors that were randomly assigned to 4 experimental groups (n=12). CG: (control) without treatment; NF: 4 min application of neutral fluoride; APF: application of 1.23% acidulated phosphate fluoride (APF) for 4 min; and SFV: application of 5% sodium fluoride varnish for 6 h. For each group, after surface treatment, prophylaxis of enamel and bracket bonding with Transbond XT composite resin (3M) were performed following the manufacturers specifications. The shear bond strength was performed with a universal testing machine 24 h after fixing the brackets. The tooth surfaces were analyzed to verify the adhesive remnant index (ARI). Data were analyzed statistically by ANOVA and Tukeys test (α=0.05). There was statistically significant difference among the groups (p<0.0001). CG and NF groups presented significantly higher bond strength than APF and SFV. There was no significant difference between CG and NF or between APF and SFV (p>0.05). The analysis of ARI scores revealed that most failures occurred at the enamel-resin interface. It may be concluded that the pre-treatment of enamel with 1.23% APF and 5% SFV prior to fixing orthodontic brackets reduces shear bond strength values.

Analysis of Metal Contents in Portland Type V and MTA-Based Cements

The aim of this study was to determine, by Atomic Absorption Spectrometry (AAS), the concentration levels of 11 metals in Type V gray and structural white PC, ProRoot MTA, and MTA Bio. Samples, containing one gram of each tested cement, were prepared and transferred to a 100 mL Teflon tube with a mixture of 7.0 mL of nitric acid and 21 mL of hydrochloric acid. After the reaction, the mixture was filtered and then volumed to 50 mL of distilled water. For each metal, specific patterns were determined from universal standards. Arsenic quantification was performed by hydride generator. The analysis was performed five times and the data were statistically analyzed at 5% level of significance. Only the cadmium presented concentration levels of values lower than the quantification limit of the device. The AAS analysis showed increased levels of calcium, nickel, and zinc in structural white PC. Type V PC presented the greatest concentration levels of arsenic, chromium, copper, iron, lead, and manganese (P < 0.05). Bismuth was found in all cements, and the lowest concentration levels were observed in Portland cements, while the highest were observed in ProRoot MTA. Both PC and MTA-based cements showed evidence of metals inclusion.

Portland Cement Use in Dental Root Perforations: A Long Term Followup

Root canal and furcal perforations are causes of endodontic therapy failure and different materials that stimulate tissue mineralization have been proposed for perforation treatment. In the first case, a patient presented tooth 46 with unsatisfactory endodontic treatment and a periapical radiographic lesion. A radiolucent area compatible with a perforating internal resorption cavity was found in the mesial root. The granulation tissue was removed, and root canals were prepared. The intracanal medication was composed of calcium hydroxide and the perforation cavity was filled with Portland cement. The 11-year followup showed radiographic repair of the tissue adjacent to the perforation and absence of clinical signs and symptoms or periapical lesion. In the second case, a patient presented with edema on the buccal surface of tooth 46. The examination showed a radiolucent area in the furcation region compatible with an iatrogenic perforation cavity. The mesial root canals were calcified, and only the distal root canal was prepared. The cavity was filled with a calcium hydroxide-based paste and the distal root canal was obturated. In sequence, the perforation cavity was filled with Portland cement. The 9-year followup showed the tooth in masticatory function with radiographic and clinical aspects compatible with normality.

Effects of alpha-tocopherol on fracture resistance after endodontic treatment, bleaching and restoration

This study evaluated the effects of 10% alphatocopherol on the fracture resistance of endodontically treated teeth subjected to tooth bleaching with hydrogen peroxide and immediately restored with composite resin. Fifty bovine incisors were selected, including 10 sound teeth that constituted the control group (G1 (C)). The remaining 40 teeth, which were endodontically treated, were divided into four groups (n = 10): G2 (CR), consisting of teeth immediately restored with composite resin; G3 (HP + CR), consisting of teeth subjected to tooth bleaching with 38% hydrogen peroxide and immediately restored with composite resin; G4 (HP + SA + CR), which received treatment similar to that used for G3, but with 10% sodium ascorbate gel applied after the bleaching protocol; and G5 (HP + AT + CR), which was similar to G4 but included 10% alphatocopherol gel as an antioxidant. After 24 h, composite restorations were performed, and teeth were subjected to a fracture resistance test at a speed of 0.5 mm/min in an electromechanical testing machine. The axial force was applied with an angle of incidence of 135° relative to the long axis of the root. Data were subjected to ANOVA and Tukey tests (p = 0.05). G1 exhibited the highest fracture resistance (p < 0.05). No significant differences among the other experimental groups were observed. The 10% sodium ascorbate and 10% alphatocopherol gels did not improve the fracture resistance of endodontically treated teeth subjected to bleaching with 38% hydrogen peroxide.

PREDICTABLE INTERPROXIMAL TISSUE REMOVAL WITH A SURGICAL STENT

The correction of diastemas in the anterior region with composite resin is considered to be practical and conservative. Harmony between the restorative material and the periodontium is necessary to achieve satisfactory functional and esthetic results. Whenever excessive gingiva occurs in the interproximal region, removal is necessary to avoid excessively contoured restorations. A predictable technique is described to conservatively remove interproximal tissue in situations in which crown lengthening is required to treat bilateral diastemas. A surgical template based on the diagnostically waxed cast was produced to serve as a reference during periodontal surgery.

Simvastatin modulates gingival cytokine and MMP production in a rat model of ligature-induced periodontitis

Purpose The aim of this study was to evaluate the effect of simvastatin on the synthesis of cytokines TNF-α and IL-10 and metalloproteinase (MMPs) 2 and 9 in a rat model of ligature-induced periodontitis. Materials and methods Twenty Wistar rats were used, and a cotton ligature was place in a subgingival position encircling the entire cervix of the first molar of the left (ipsilateral) side of the mandible. The right (contralateral) side of the mandible had no ligature placed and was used as control. After the ligature placement, animals were randomly assigned to two experimental groups (n=10): 1) rats with ligature + vehicle (saline; 10 mL/kg; orally) and 2) rats with ligature + simvastatin (25 mg/kg; orally). After 14 days of treatment, the animals were euthanized by anesthetic overdose and the gingival tissue was removed and homogenized in appropriate buffer. MMP-2 and -9 release as well as the IL-10 and TNF-α levels were detected by enzyme-linked immunosorbent assay. Statistical comparison was performed by unpaired Student’s t-test, with p<0.05 representing significance. Results No differences were observed for TNF-α production between the groups (p>0.05). However, IL-10 was upregulated in simvastatin-treated animals (1.8-fold increase) in comparison with the vehicle-treated group (p<0.05). Simvastatin reduced the gingival levels of MMP-9 (64.3%) in comparison with vehicle-treated samples (p<0.05). Conclusion Oral treatment with simvastatin increased the release of IL-10 and reduced the MMP-9 in ligature-induced periodontitis model in rats.

Shear Bond Strength of Orthodontic Brackets Fixed with Remineralizing Adhesive Systems after Simulating One Year of Orthodontic Treatment

The objective of this study is to assess, in vitro, the shear bond strength of orthodontic brackets fixed with remineralizing adhesive systems submitted to thermomechanical cycling, simulating one year of orthodontic treatment. Sixty-four bovine incisor teeth were randomly divided into 4 experimental groups (n = 16): XT: Transbond XT, QC: Quick Cure, OL: Ortholite Color, and SEP: Transbond Plus Self-Etching Primer. The samples were submitted to thermomechanical cycling simulating one year of orthodontic treatment. Shear bond strength tests were carried out using a universal testing machine with a load cell of 50 KgF at 0.5 mm/minute. The samples were examined with a stereomicroscope and a scanning electron microscope (SEM) in order to analyze enamel surface and Adhesive Remnant Index (ARI). Kruskal-Wallis and Mann-Whitney (with Bonferroni correction) tests showed a significant difference between the studied groups (p < 0.05). Groups XT, QC, and SEP presented the highest values of adhesive resistance and no statistical differences were found between them. The highest frequency of failures between enamel and adhesive was observed in groups XT, QC, and OL. Quick Cure (QC) remineralizing adhesive system presented average adhesive resistance values similar to conventional (XT) and self-etching (SEP) adhesives, while remineralizing system (OL) provided the lowest values of adhesive resistance.

Methods for removal of resin remaining after debonding of orthodontic brackets: a literature review

The removal of resin debris and/or resin cement from the enamel surface without causing iatrogenic is the main objective when removing the orthodontic brackets. Some factors such as the time required for removal, damage to the tooth structure, are essential factors for the clinician at the time of removal. Various techniques are used for the removal of orthodontic brackets after the treatment; it is known that the use of clinical procedures such as the use of diamond burs and some pliers removers can damage the structure of the enamel, often depending on the bond strength that should be taken into consideration at the time of removal. This literature review aims to gather the most relevant studies that can clarify the clinical technique, which may be more suitable for removal of the brackets.

Antimicrobial Potential of Laser Diode in Infected Dentin

AIM To evaluate the antibacterial effect of diode laser, associated or not with 2.5% sodium hypochlorite (NaOCl), against Enterococcus faecalis. MATERIALS AND METHODS Eighty dentin blocks were obtained from single-rooted human teeth and sterilized. Seventy were inoculated with 0.01 mL of fresh bacterial inoculum (within 24 hours of preparation from pure culture) standardized to 1 McFarland turbidity. Contaminated blocks were incubated for 7 days at 37°C in humid conditions. Ten uncontaminated samples were incubated at 37°C during the contamination period to serve as a negative control group, while 10 of the infected specimens served as a positive control group. The dentin blocks were randomly divided into eight experimental groups (n = 10 each) according to the method of decontamination: 2.5% NaOCl alone; 2.5% NaOCl + photodynamic therapy (PDT) with methylene blue/660 nm laser at 18 J for 180 seconds; 2.5% NaOCl + PDT with methylene blue/660 nm laser at 8 J for 80 seconds; methylene blue alone; PDT alone with methylene blue/660 nm laser at 18 J for 180 seconds; PDT alone with methylene blue/660 nm laser at 8 J laser for 80 seconds; positive control group; and negative control group. Microbial growth was evaluated by culture medium turbidity and microbial concentration was analyzed by UV spectrophotometry (adjusted to read at wavelength l = 600 nM). RESULTS Root canals treated with laser alone at 18 J for 180 seconds had higher bacterial contamination compared with groups in which NaOCl was used, with or without laser irradiation at 18 J for 180 seconds (p < 0.05). CONCLUSION Photodynamic therapy with a 660 nm diode laser effectively reduced E. faecalis contamination. These findings can guide development of further studies in search of better alternatives for endodontic treatment. CLINICAL RELEVANCE Chemical and mechanical root canal preparation plays an essential role in reducing microbial burden. However, microorganisms present in areas not mechanically reachable by endodontic instruments. As an alternative to fix this problem, the laser can be applied.

Endodontic Management of Open Apex Teeth Using Lyophilized Collagen Sponge and MTA Cement: Report of Two Cases

Teeth with open apices, such as in immature teeth or those with apical root resorption are clinical cases with difficult immediate resolution. With the use of mineral trioxide aggregate (MTA) in dentistry, it was possible to optimize the treatment time of these cases by immediate placement of apical plug and the root canal filling. However, some negative effects can occur if MTA is extruded beyond the apex. To avoid this accident, it has been recommended to use of an apical matrix prior to placement of MTA. This study reports two clinical cases of apical plug placement in teeth with pulp necrosis and open apices. One case had an immature apex due to dental trauma and the other case had apical resorption due to the presence of endodontic infection in the root canal. MTA apical plug with approximately 4 mm thickness, was placed in the apical zone of the root and immediately the canal was obturated with gutta-percha and endodontic sealer. Follow-up evaluations showed clinical and radiographic evidence of success. Keywords: Apex; Collagen; Endodontics; Mineral Trioxide Aggregate