Rachael L. Myers-Ward

Sensitive room-temperature terahertz detection via the photothermoelectric effect in graphene

Terahertz radiation has uses in applications ranging from security to medicine. However, sensitive room-temperature detection of terahertz radiation is notoriously difficult. The hot-electron photothermoelectric effect in graphene is a promising detection mechanism; photoexcited carriers rapidly thermalize due to strong electron-electron interactions, but lose energy to the lattice more slowly. The electron temperature gradient drives electron diffusion, and asymmetry due to local gating or dissimilar contact metals produces a net current via the thermoelectric effect. Here, we demonstrate a graphene thermoelectric terahertz photodetector with sensitivity exceeding 10 V W(-1) (700 V W(-1)) at room temperature and noise-equivalent power less than 1,100 pW Hz(-1/2) (20 pW Hz(-1/2)), referenced to the incident (absorbed) power. This implies a performance that is competitive with the best room-temperature terahertz detectors for an optimally coupled device, and time-resolved measurements indicate that our graphene detector is eight to nine orders of magnitude faster than those. A simple model of the response, including contact asymmetries (resistance, work function and Fermi-energy pinning) reproduces the qualitative features of the data, and indicates that orders-of-magnitude sensitivity improvements are possible.

Technique for the dry transfer of epitaxial graphene onto arbitrary substrates.

To make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO(2), GaN and Al(2)O(3) substrates using a thermal release tape. Subsequent Hall effect measurements illustrated that minimal degradation in the carrier mobility was induced following the transfer process in lithographically patterned devices. Correspondingly, a large drop in the carrier concentration was observed following the transfer process, supporting the notion that a gradient in the carrier density is present in C-face EG, with lower values being observed in layers further removed from the SiC interface. X-ray photoemission spectra collected from EG films attached to the transfer tape revealed the presence of atomic Si within the EG layers, which may indicate the identity of the unknown intrinsic dopant in EG. Finally, this transfer process is shown to enable EG films amenable for use in device fabrication on arbitrary substrates and films that are deemed most beneficial to carrier transport, as flexible electronic devices or optically transparent contacts.

Correlating Raman Spectral Signatures with Carrier Mobility in Epitaxial Graphene: A Guide to Achieving High Mobility on the Wafer Scale

We report a direct correlation between carrier mobility and Raman topography of epitaxial graphene (EG) grown on silicon carbide (SiC). We show the Hall mobility of material on SiC(0001) is highly dependent on thickness and monolayer strain uniformity. Additionally, we achieve high mobility epitaxial graphene (18100 cm(2)/(V s) at room temperature) on SiC(0001) and show that carrier mobility depends strongly on the graphene layer stacking.

Quantum linear magnetoresistance in multilayer epitaxial graphene.

We report the first observation of linear magnetoresistance (LMR) in multilayer epitaxial graphene grown on SiC. We show that multilayer epitaxial graphene exhibits large LMR from 2.2 K up to room temperature and that it can be best explained by a purely quantum mechanical model. We attribute the observation of LMR to inhomogeneities in the epitaxially grown graphene film. The large magnitude of the LMR suggests potential for novel applications in areas such as high-density data storage and magnetic sensors and actuators.

Conductance Anisotropy in Epitaxial Graphene Sheets Generated by Substrate Interactions

We present the first microscopic transport study of epitaxial graphene on SiC using an ultrahigh vacuum four-probe scanning tunneling microscope. Anisotropic conductivity is observed that is caused by the interaction between the graphene and the underlying substrate. These results can be explained by a model where charge buildup at the step edges leads to local scattering of charge carriers. This highlights the importance of considering substrate effects in proposed devices that utilize nanoscale patterning of graphene on electrically isolated substrates.

Tunable Terahertz Hybrid Metal–Graphene Plasmons

We report here a new type of plasmon resonance that occurs when graphene is connected to a metal. These new plasmon modes offer the potential to incorporate a tunable plasmonic channel into a device with electrical contacts, a critical step toward practical graphene terahertz optoelectronics. Through theory and experiments, we demonstrate, for example, anomalously high resonant absorption or transmission when subwavelength graphene-filled apertures are introduced into an otherwise conductive layer. These tunable plasmon resonances are essential yet missing ingredients needed for terahertz filters, oscillators, detectors, and modulators.Among its many outstanding properties, graphene supports terahertz surface plasma waves – sub-wavelength charge density oscillations connected with electromagnetic fields that are tightly localized near the surface[1, 2]. When these waves are confined to finite-sized graphene, plasmon resonances emerge that are characterized by alternating charge accumulation at the opposing edges of the graphene. The resonant frequency of such a structure depends on both the size and the surface charge density, and can be electrically tuned throughout the terahertz range by applying a gate voltage[3, 4]. The promise of tunable graphene THz plasmonics has yet to be fulfilled, however, because most proposed optoelectronic devices including detectors, filters, and modulators [5–10] desire near total modulation of the absorption or transmission, and require electrical contacts to the graphene – constraints that are difficult to meet using existing plasmonic structures. We report here a new class of plasmon resonance that occurs in a hybrid graphene-metal structure. The sub-wavelength metal contacts form a capacitive grid for accumulating charge, while the narrow interleaved graphene channels, to first order, serves as a tunable inductive medium, thereby forming a structure that is resonantly-matched to an incident terahertz wave. We experimentally demonstrate resonant absorption near the theoretical maximum in readily-available, large-area graphene, ideal for THz detectors and tunable absorbers. We further predict that the use of high mobility graphene will allow resonant THz transmission near 100%, realizing a tunable THz filter or modulator. The structure is strongly coupled to incident THz radiation, and solves a fundamental problem of how to incorporate a tunable plasmonic channel into a device with electrical contacts.

Turning of Basal Plane Dislocations During Epitaxial Growth on 4° off-axis 4H-SiC

Epitaxial layers were grown on 4° off-axis 4H-SiC substrates by hot-wall chemical vapor deposition. The reduced off-cut angle resulted in lower basal plane dislocation (BPD) densities. The dependence of BPD reduction on growth conditions was investigated using ultraviolet photoluminescence (UVPL) imaging. With this method, it was found that the dislocations were converting to threading edge dislocations throughout the thickness of the film. A high (≥ 97%) conversion efficiency was found for all films grown with this orientation. A conversion of 100% was achieved for several films without pre-growth treatments or growth interrupts.

Increased Growth Rate in a SiC CVD Reactor Using HCl as a Growth Additive

Hydrogen chloride (HCl) was added to a standard SiC epitaxial growth process as an additive gas. A low-pressure, hot-wall CVD reactor, using silane and propane precursors and a hydrogen carrier gas, was used for these experiments. It is proposed that the addition of HCl suppresses Si cluster formation in the gas phase, and possibly also preferentially etches material of low crystalline quality. The exact mechanism of the growth using an HCl additive is still under investigation, however, higher growth rates could be obtained and the surfaces were improved when HCl was added to the flow. The film morphology was studied using SEM and AFM and the quality with LTPL analysis, which are reported.

Graphene nanoribbon field-effect transistors on wafer-scale epitaxial graphene on SiC substrates a

We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ∼10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ∼0.14 eV. Contrary to prior observations of disordered transport and severe edge-roughness effects of graphene nanoribbons (GNRs), the experimental results presented here clearly show that the transport mechanism in carefully fabricated GNRFETs is conventional band-transport at room temperature and inter-band tunneling at low temperature. The entire space of temperature, size, and geometry dependent transport properties and electrostatics of the GNRFETs are explained by a conventional thermionic emission and tunneling current model. Our combined experimental and modeling work proves that carefully fabricated narrow GNRs behave as conventional semiconductors and remain potential candidates for electronic switching devices.

Multicarrier transport in epitaxial multilayer graphene

Variable-field Hall measurements were performed on epitaxial graphene grown on Si-face and C-face SiC. The carrier transport involves essentially a single-type of carrier in few-layer graphene, regardless of SiC face. However, in multi-layer graphene (MLG) grown on C-face SiC, the Hall measurements indicated the existence of several groups of carriers with distinct mobilities. Electrical transport in MLG can be properly described by invoking three independent conduction channels in parallel. Two of these are n- and p-type, while the third involves nearly intrinsic graphene. The carriers in this lightly doped channel have significantly higher mobilities than the other two.