Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Reed F. Busse is active.

Publication


Featured researches published by Reed F. Busse.


Magnetic Resonance in Medicine | 2006

Fast spin echo sequences with very long echo trains: design of variable refocusing flip angle schedules and generation of clinical T2 contrast.

Reed F. Busse; Hari Hariharan; Anthony Vu; Jean H. Brittain

Reducing and continuously varying the flip angle of the refocusing RF pulses in a rapid acquisition with relaxation enhancement (RARE; fast/turbo spin echo) sequence is a useful means of addressing high RF power deposition and modulation transfer function (MTF) distortion due to relaxation. This work presents a streamlined technique to generate a sequence of refocusing flip angles on a per‐prescription basis that produces relatively high SNR and limits blurring in a wide range of materials encountered in vivo. Since the “effective TE” (traditionally defined as the time at which the center of k‐space is sampled) no longer corresponds to the expected amount of spin‐echo T2 contrast due to the mixing of stimulated and spin echoes, a “contrast‐equivalent” TE is defined and experimentally demonstrated that allows annotation of a more accurate effective TE that matches the contrast produced by 180° refocusing. Furthermore, contrast is shown to be manipulable by the addition of magnetization preparation pulse sequence segments, such as T2‐prep, to produce clinically desirable contrast for routine head and body imaging. Magn Reson Med, 2006.


Radiology | 2009

Knee Joint: Comprehensive Assessment with 3D Isotropic Resolution Fast Spin-Echo MR Imaging—Diagnostic Performance Compared with That of Conventional MR Imaging at 3.0 T

Richard Kijowski; Kirkland W. Davis; Michael A. Woods; Mary J. Lindstrom; Arthur A. De Smet; Garry E. Gold; Reed F. Busse

PURPOSE To determine whether a three-dimensional isotropic resolution fast spin-echo sequence (FSE-Cube) has similar diagnostic performance as a routine magnetic resonance (MR) imaging protocol for evaluating the cartilage, ligaments, menisci, and osseous structures of the knee joint in symptomatic patients at 3.0 T. MATERIALS AND METHODS This prospective, HIPAA-compliant, institutional review board-approved study was performed with a waiver of informed consent. FSE-Cube was added to the routine 3.0-T MR imaging protocol performed in 100 symptomatic patients (54 male patients with a median age of 32 years and 46 female patients with a median age of 33 years) who subsequently underwent arthroscopic knee surgery. All MR imaging studies were independently reviewed twice by two musculoskeletal radiologists. During the first review, the routine MR imaging protocol was used to detect cartilage lesions, ligament tears, meniscal tears, and bone marrow edema lesions. During the second review, FSE-Cube with multiplanar reformations was used to detect these joint abnormalities. With arthroscopic results as the reference standard, the sensitivity and specificity of FSE-Cube and the routine MR imaging protocol in the detection of cartilage lesions, anterior cruciate ligament tears, and meniscal tears were calculated. Permutation tests were used to compare sensitivity and specificity values. RESULTS FSE-Cube had significantly higher sensitivity (P = .039) but significantly lower specificity (P = .003) than the routine MR imaging protocol for detecting cartilage lesions. There were no significant differences (P = .183-.999) in sensitivity and specificity between FSE-Cube and the routine MR imaging protocol in the detection of anterior cruciate ligament tears, medial meniscal tears, or lateral meniscal tears. FSE-Cube depicted 96.2% of medial collateral ligament tears, 100% of lateral collateral ligament tears, and 85.3% of bone marrow edema lesions identified on images obtained with the routine MR imaging protocol. CONCLUSION FSE-Cube has similar diagnostic performance as a routine MR imaging protocol for detecting cartilage lesions, cruciate ligament tears, collateral ligament tears, meniscal tears, and bone marrow edema lesions within the knee joint at 3.0 T.


American Journal of Roentgenology | 2007

Isotropic MRI of the knee with 3D fast spin-echo extended echo-train acquisition (XETA) : Initial experience

Garry E. Gold; Reed F. Busse; Carol Beehler; Eric T. Han; Anja C. S. Brau; Philip J. Beatty; Christopher F. Beaulieu

OBJECTIVE The purpose of our study was to prospectively compare a recently developed method of isotropic 3D fast spin-echo (FSE) with extended echo-train acquisition (XETA) with 2D FSE and 2D fast recovery FSE (FRFSE) for MRI of the knee. SUBJECTS AND METHODS Institutional review board approval, Health Insurance Portability and Accounting Act (HIPAA) compliance, and informed consent were obtained. We studied 10 healthy volunteers and one volunteer with knee pain using 3D FSE XETA, 2D FSE, and 2D FRFSE. Images were obtained both with and without fat suppression. Cartilage and muscle signal-to-noise ratio (SNR) and cartilage-fluid contrast-to-noise ratio (CNR) were compared using a Students t test. We also compared reformations of 3D FSE XETA with 2D FSE images directly acquired in the axial plane. RESULTS Cartilage SNR was higher with 3D FSE XETA (56.8 +/- 9 [SD]) compared with the 2D FSE (45.8 +/- 8, p < 0.01) and 2D FRFSE (32.5 +/- 5.3, p < 0.01). Muscle SNR was significantly higher with 3D FSE XETA (52.1 +/- 4.3) than 2D FSE (45.2 +/- 9, p < 0.01) and 2D FRFSE (23.6 +/- 6.2, p < 0.01). Fluid SNR was significantly higher for 2D FSE (144.9 +/- 33) than 3D FSE XETA (104.7 +/- 18, p < 0.01). Compared with 2D FSE and 2D FRFSE, 3D FSE XETA had lower cartilage-fluid CNR due to higher cartilage SNR (p < 0.01). Three-dimensional FSE XETA acquired volumetric data sets with isotropic resolution. Reformatted images in the axial plane were similar to axial 2D FSE acquisitions but with thinner slices. CONCLUSION Three-dimensional FSE XETA acquires high-resolution (approximately 0.7 mm) isotropic data with intermediate and T2-weighting that may be reformatted in arbitrary planes. Three-dimensional FSE XETA is a promising technique for MRI of the knee.


Magnetic Resonance in Medicine | 2008

Effects of refocusing flip angle modulation and view ordering in 3D fast spin echo

Reed F. Busse; Anja C. S. Brau; Anthony Vu; Charles R. Michelich; Ersin Bayram; Richard Kijowski; Scott B. Reeder; Howard A. Rowley

Recent advances have reduced scan time in three‐dimensional fast spin echo (3D‐FSE) imaging, including very long echo trains through refocusing flip angle (FA) modulation and 2D‐accelerated parallel imaging. This work describes a method to modulate refocusing FAs that produces sharp point spread functions (PSFs) from very long echo trains while exercising direct control over minimum, center‐k‐space, and maximum FAs in order to accommodate the presence of flow and motion, SNR requirements, and RF power limits. Additionally, a new method for ordering views to map signal modulation from the echo train into ky‐kz space that enables nonrectangular k‐space grids and autocalibrating 2D‐accelerated parallel imaging is presented. With long echo trains and fewer echoes required to encode large matrices, large volumes with high in‐ and through‐plane resolution matrices may be acquired with scan times of 3–6 min, as demonstrated for volumetric brain, knee, and kidney imaging. Magn Reson Med 60:640–649, 2008.


Magnetic Resonance in Medicine | 2008

In vivo T1ρ mapping in cartilage using 3D magnetization-prepared angle-modulated partitioned k-space spoiled gradient echo snapshots (3D MAPSS)

Xiaojuan Li; Eric T. Han; Reed F. Busse; Sharmila Majumdar

For T1ρ quantification, a three‐dimensional (3D) acquisition is desired to obtain high‐resolution images. Current 3D methods that use steady‐state spoiled gradient‐echo (SPGR) imaging suffer from high SAR, low signal‐to‐noise ratio (SNR), and the need for retrospective correction of contaminating T1 effects. In this study, a novel 3D acquisition scheme—magnetization‐prepared angle‐modulated partitioned‐k‐space SPGR snapshots (3D MAPSS)—was developed and used to obtain in vivo T1ρ maps. Transient signal evolving towards the steady‐state were acquired in an interleaved segmented elliptical centric phase encoding order immediately after a T1ρ magnetization preparation sequence. RF cycling was applied to eliminate the adverse impact of longitudinal relaxation on quantitative accuracy. A variable flip angle train was designed to provide a flat signal response to eliminate the filtering effect in k‐space caused by transient signal evolution. Experiments in phantoms agreed well with results from simulation. The T1ρ values were 42.4 ± 5.2 ms in overall cartilage of healthy volunteers. The average coefficient‐of‐variation (CV) of mean T1ρ values (N = 4) for overall cartilage was 1.6%, with regional CV ranging from 1.7% to 8.7%. The fitting errors using MAPSS were significantly lower (P < 0.05) than those using sequences without RF cycling and variable flip angles. Magn Reson Med 59:298–307, 2008.


Radiology | 2008

Ankle: Isotropic MR Imaging with 3D-FSE-Cube—Initial Experience in Healthy Volunteers

Kathryn J. Stevens; Reed F. Busse; Eric T. Han; Anja C. S. Brau; Philip J. Beatty; Christopher F. Beaulieu; Garry E. Gold

The purpose of this prospective study was to compare a new isotropic three-dimensional (3D) fast spin-echo (FSE) pulse sequence with parallel imaging and extended echo train acquisition (3D-FSE-Cube) with a conventional two-dimensional (2D) FSE sequence for magnetic resonance (MR) imaging of the ankle. After institutional review board approval and informed consent were obtained and in accordance with HIPAA privacy guidelines, MR imaging was performed in the ankles of 10 healthy volunteers (four men, six women; age range, 25-41 years). Imaging with the 3D-FSE-Cube sequence was performed at 3.0 T by using both one-dimensional- and 2D-accelerated autocalibrated parallel imaging to decrease imaging time. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) with 3D-FSE-Cube were compared with those of the standard 2D FSE sequence. Cartilage, muscle, and fluid SNRs were significantly higher with the 3D-FSE-Cube sequence (P < .01 for all). Fluid-cartilage CNR was similar for both techniques. The two sequences were also compared for overall image quality, blurring, and artifacts. No significant difference for overall image quality and artifacts was demonstrated between the 2D FSE and 3D-FSE-Cube sequences, although the section thickness in 3D-FSE-Cube imaging was much thinner (0.6 mm). However, blurring was significantly greater on the 3D-FSE-Cube images (P < .04). The 3D-FSE-Cube sequence with isotropic resolution is a promising new MR imaging sequence for viewing complex joint anatomy.


Journal of Ultrasound in Medicine | 2005

Fetal Magnetic Resonance Imaging in the Evaluation of Fetuses Referred for Sonographically Suspected Abnormalities of the Corpus Callosum

Orit A. Glenn; Ruth B. Goldstein; Katy C. Li; Sun J. Young; Mary E. Norton; Reed F. Busse; James D. Goldberg; A. James Barkovich

Fetal magnetic resonance imaging (MRI) has been shown to be useful in assessing the developing central nervous system. However, its utility in specific brain disorders has not been well investigated. We hypothesized that fetal MRI can better assess the integrity of the brain in cases with sonographically suspected callosal abnormalities.


Magnetic Resonance in Medicine | 2004

Reduced RF power without blurring : correcting for modulation of refocusing flip angle in FSE sequences

Reed F. Busse

In order to reduce the RF power deposition of fast spin echo sequences operated at high field strength, the flip angles of the refocusing pulse train are varied from pulse to pulse using a modulated angle refocusing train method. The technique employs high flip angle pulses prior to sampling the center of k‐space in order to preserve T2 contrast, low flip angles after sampling the center of k‐space to reduce power and prolong relaxation, and a smooth transition between the high and low flip angle regimes in order to maintain the pseudosteady‐state, maximizing signal and avoiding artifact‐inducing oscillations. An analytical expression is used to predict and correct for the flip angle dependence of the signal, thus eliminating any deleterious effects of flip angle modulation on the point spread function. Analysis of resolution and SNR were performed in simulation and phantom studies. In human imaging studies, it is shown that RF energy deposition per slice in a single‐shot fast spin echo application can be reduced by up to 75%, making the sequence as practical at 3 T as it is has been at 1.5 T. Magn Reson Med 51:1031–1037, 2004.


Magnetic Resonance in Medicine | 2000

Interactive fast spin-echo imaging.

Reed F. Busse; Stephen J. Riederer; Joel G. Fletcher; Adil E. Bharucha; Kathy R. Brandt

It is shown that a spin‐echo sequence may be used to acquire T2‐weighted, high‐resolution, high‐SNR sections at quasi‐real‐time frame rates for interactive, diagnostic imaging. A single‐shot fast spin‐echo sequence was designed which employs driven equilibrium to realign transverse magnetization remaining at the final spin echo. Driven equilibrium is shown to improve T2 contrast at a given TR, or conversely to reduce TR by approximately 1000 msec and thus increase temporal resolution while maintaining a given level of contrast. Wiener demodulation of k‐space data prior to reconstruction is shown to reduce blurring caused by T2‐decay while constraining noise often associated with other inverse filters. Images are continuously acquired, reconstructed, and displayed at rates of one image every one to two seconds, while section position and contrast may be altered interactively. The clinical utility of this method is demonstrated with applications to dynamic pelvic floor imaging and interactive obstetric imaging. Magn Reson Med 44:339–348, 2000.


Journal of Magnetic Resonance Imaging | 2012

High resolution navigated three‐dimensional T1‐weighted hepatobiliary MRI using gadoxetic acid optimized for 1.5 tesla

Scott K. Nagle; Reed F. Busse; Anja C. S. Brau; Jean H. Brittain; Alex Frydrychowicz; Yuji Iwadate; Scott B. Reeder

To determine optimal delay times and flip angles for T1‐weighted hepatobiliary imaging at 1.5 Tesla (T) with gadoxetic acid and to demonstrate the feasibility of using a high‐resolution navigated optimized T1‐weighted pulse sequence to evaluate biliary disease.

Collaboration


Dive into the Reed F. Busse's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Scott B. Reeder

University of Wisconsin-Madison

View shared research outputs
Top Co-Authors

Avatar

Sean B. Fain

University of Wisconsin-Madison

View shared research outputs
Top Co-Authors

Avatar

Ananth J. Madhuranthakam

University of Texas Southwestern Medical Center

View shared research outputs
Top Co-Authors

Avatar

Richard Kijowski

University of Wisconsin-Madison

View shared research outputs
Researchain Logo
Decentralizing Knowledge