Rémi Waché

Soft Conductive Elastomer Materials for Stretchable Electronics and Voltage Controlled Artificial Muscles

Block copolymer elastomer conductors (BEC) are mixtures of block copolymers grafted with conducting polymers, which are found to support very large strains, while retaining a high level of conductivity. These novel materials may find use in stretchable electronics. The use of BEC is demonstrated in a capacitive strain sensor and in an artificial muscle of the dielectric elastomer actuator type, supporting more than 100% actuation strain and capacity strain sensitivity up to 300%.

Rotary Motion Achieved by New Torsional Dielectric Elastomer Actuators Design

This paper reports a new way to produce a rotation motion actuated by dielectric elastomer actuators. Two specific electrode designs have been developed and the rotation of the actuator centers has been demonstrated and measured. At low strains, the rotation shows a nearly quadratic dependence with the voltage. This behavior was used to compare the performances between the two proposed designs. Among the tested configurations, a maximal rotation of 10° was achieved.

DEA material enhancement with dipole grafted PDMS networks

Silicone elastomers are highly suitable for application in the field of dielectric elastomer actuators (DEA) due to their unique material properties (e.g. low glass temperature, thermal stability, large capability of chemical tailoring). The elastomer forming Polydimethysiloxane (PDMS) employed for this study consists of chains with vinyl termination and is cross linked via hydrosilylation to a cross linking molecule in the presence of platinum catalyst. Here, dipole molecules (N-Allyl-N-methyl-4-nitroaniline) were specifically synthesized such that they could chemically graft to the silicone network. The most prominent advantage of this approach is the achievement of a homogeneous distribution of dipoles in the PDMS matrix and a suppression of phase separation due to the grafting to the junction points of the rubber network. Several films with dipole contents ν ranging from 0 %wt up to 10.9 %wt were prepared. The films were investigated to determine their mechanical (tensile testing), dielectric (dielectric relaxation spectroscopy) and electrical (electrical breakdown) properties. This new approach for composites on the molecular level leads to homogeneous films with enhanced material properties for DEA applications. An increase in permittivity from 3.3 to 6.0, a decrease in electrical breakdown from 130 V/μm to 50 V/μm and a lowering of the mechanical stiffness from 1700 kPa to 300 kPa was observed.

Molecular level materials design for improvements of actuation properties of dielectric elastomer actuators

Dielectric elastomer actuators are soft electro-mechanical transducers with possible uses in robotic, orthopaedic and automotive applications. The active material must be soft and have a high ability to store electrical energy. Hence, three properties of the elastic medium in a dielectric elastomer actuator affect the actuation properties directly: dielectric constant, electric breakdown strength, and mechanical stiffness. The dielectric constant of a given elastomer can be improved by mixing it with other components with a higher dielectric constant, which can be classified as insulating or conducting. In this paper, an overview of all approaches proposed so far for dielectric constant improvement in these soft materials will be provided. Insulating particles such as TiO2 nanoparticles can raise the dielectric constant, but may also lead to stiffening of the composite, such that the overall actuation is lowered. It is shown here how a chemical coating of the TiO2 nanoparticles leads to verifiable improvements. Conducting material can also lead to improvements, as has been shown in several cases. Simple percolation, relying on the random distribution of conducting nanoparticles, commonly leads to drastic lowering of the breakdown strength. On the other hand, conducting polymer can also be employed, as has been demonstrated. We show here how an approach based on a specific chemical reaction between the conducting polymer and the elastomer network molecules solves the problem of premature breakdown which is otherwise typically found.

Materials science on the nano-scale for improvements in actuation properties of dielectric elastomer actuators

We discuss various approaches to increasing the dielectric constant of elastomer materials, for use in dielectric elastomer actuators. High permittivity metal-oxide nano-particles can show elevated impact compared to larger size particles, but suffer from water uptake. Composites with conducting particles lead to extremely high permittivity caused by percolation, but they often suffer early breakdown. We present experiments on approaches combining metal-oxides and metal particles, which compensate for the drawbacks, and may lead to useful DEA materials in which all relevant properties are technologically useful. The key seems to be to avoid percolation and achieve a constant nearest-neighbor separation.

Selectively reflective transparent sheets

We investigate the possibility to selectively reflect certain wavelengths while maintaining the optical properties on other spectral ranges. This is of particular interest for transparent materials, which for specific applications may require high reflectivity at pre-determined frequencies. Although there exist currently techniques such as coatings to produce selective reflection, this work focuses on new approaches for mass production of polyethylene sheets which incorporate either additives or surface patterning for selective reflection between 8 to 13 μ m. Typical additives used to produce a greenhouse effect in plastics include particles such as clays, silica or hydroxide materials. However, the absorption of thermal radiation is less efficient than the decrease of emissivity as it can be compared with the inclusion of Lambertian materials. Photonic band gap engineering by the periodic structuring of metamaterials is known in nature for producing the vivid bright colors in certain organisms via strong wavelength-selective reflection. Research to artificially engineer such structures has mainly focused on wavelengths in the visible and near infrared. However few studies to date have been carried out to investigate the properties of metastructures in the mid infrared range even though the patterning of microstructure is easier to achieve. We present preliminary results on the diffuse reflectivity using FDTD simulations and analyze the technical feasibility of these approaches.