Robert M. Edkins

D-π-A triarylboron compounds with tunable push-pull character achieved by modification of both the donor and acceptor moieties

The push-pull character of a series of donor-bithienyl-acceptor compounds has been tuned by adopting triphenylamine or 1,1,7,7-tetramethyljulolidine as a donor and B(2,6-Me2 -4-RC6 H2)2 (R=Me, C6 F5 or 3,5-(CF3)2 C6 H3) or B[2,4,6-(CF3 )3 C6 H2]2 as an acceptor. Ir-catalyzed C-H borylation was utilized in the derivatization of the boryl acceptors and the tetramethyljulolidine donor. The donor and acceptor strengths were evaluated by electrochemical and photophysical measurements. In solution, the compound with the strongest acceptor, B[2,4,6-(CF3)3 C6 H2]2 ((FMes)2 B), has strongly quenched emission, while all other compounds show efficient green to red (ΦF =0.80-1.00) or near-IR (NIR; ΦF =0.27-0.48) emission, depending on solvent. Notably, this study presents the first examples of efficient NIR emission from three-coordinate boron compounds. Efficient solid-state red emission was observed for some derivatives, and interesting aggregation-induced emission of the (FMes)2 B-containing compound was studied. Moreover, each compound showed a strong and clearly visible response to fluoride addition, with either a large emission-color change or turn-on fluorescence.

Electron Delocalization in Reduced Forms of 2-(BMes2)pyrene and 2,7-Bis(BMes2)pyrene.

Reduction of 2-(BMes2)pyrene (B1) and 2,7-bis(BMes2)pyrene (B2) gives rise to anions with extensive delocalization over the pyrenylene bridge and between the boron centers at the 2- and 2,7-positions, the typically unconjugated sites in the pyrene framework. One-electron reduction of B2 gives a radical anion with a centrosymmetric semiquinoidal structure, while two-electron reduction produces a quinoidal singlet dianion with biradicaloid character and a relatively large S0-T1 gap. These results have been confirmed by cyclic voltammetry, X-ray crystallography, DFT/CASSCF calculations, NMR, EPR, and UV-vis-NIR spectroscopy.

Blending Gelators to Tune Gel Structure and Probe Anion-Induced Disassembly

Blending different low molecular weight gelators (LMWGs) provides a convenient route to tune the properties of a gel and incorporate functionalities such as fluorescence. Blending a series of gelators having a common bis-urea motif, and functionalised with different amino acid-derived end-groups and differing length alkylene spacers is reported. Fluorescent gelators incorporating 1-and 2-pyrenyl moieties provide a probe of the mixed systems alongside structural and morphological data from powder diffraction and electron microscopy. Characterisation of the individual gelators reveals that although the expected α-urea tape motif is preserved, there is considerable variation in the gelation properties, molecular packing, fibre morphology and rheological behaviour. Mixing of the gelators revealed examples in which: 1) the gels formed separate, orthogonal networks maintaining their own packing and morphology, 2) the gels blended together into a single network, either adopting the packing and morphology of one gelator, or 3) a new structure not seen for either of the gelators individually was created. The strong binding of the urea functionalities to anions was exploited as a means of breaking down the gel structure, and the use of fluorescent gel blends provides new insights into anion-mediated gel dissolution.

Thermally induced defluorination during a mer to fac transformation of a blue-green phosphorescent cyclometalated iridium(III) complex.

The new homoleptic tris-cyclometalated [Ir(C^N)(3)] complexes mer-8, fac-8, and fac-9 incorporating γ-carboline ligands are reported. Reaction of 3-(2,4-difluorophenyl)-5-(2-ethylhexyl)-pyrido[4,3-b]indole 6 with iridium(III) chloride under standard cyclometalating conditions gave the homoleptic complex mer-8 in 63% yield. The X-ray crystal structure of mer-8 is described. The Ir-C and Ir-N bonds show the expected bond length alternations for the differing trans influence of phenyl and pyridyl ligands. mer-8 quantitatively isomerized to fac-8 upon irradiation with UV light. However, heating mer-8 at 290 °C in glycerol led to an unusual regioselective loss of one fluorine atom from each of the ligands, yielding fac-9 in 58% yield. fac-8 is thermally very stable: no decomposition was observed when fac-8 was heated in glycerol at 290 °C for 48 h. The γ-carboline system of fac-8 enhances thermal stability compared to the pyridyl analogue fac-Ir(46dfppy)(3)10, which decomposes extensively upon being heated in glycerol at 290 °C for 2 h. Complexes mer-8, fac-8, and fac-9 are emitters of blue-green light (λ(max)(em) = 477, 476, and 494 nm, respectively). The triplet lifetimes for fac-8 and fac-9 are ~4.5 μs at room temperature; solution Φ(PL) values are 0.31 and 0.22, respectively.

Experimental and Theoretical Studies of Quadrupolar Oligothiophene-Cored Chromophores Containing Dimesitylboryl Moieties as π-Accepting End-Groups: Syntheses, Structures, Fluorescence, and One- and Two-Photon Absorption

Quadrupolar oligothiophene chromophores composed of four to five thiophene rings with two terminal (E)-dimesitylborylvinyl groups (4 V-5 V), and five thiophene rings with two terminal aryldimesitylboryl groups (5 B), as well as an analogue of 5 V with a central EDOT ring (5 VE), have been synthesized via Pd-catalyzed cross-coupling reactions in high yields (66-89%). Crystal structures of 4 V, 5 B, bithiophene 2 V, and five thiophene-derived intermediates are reported. Chromophores 4 V, 5 V, 5 B and 5 VE have photoluminescence quantum yields of 0.26-0.29, which are higher than those of the shorter analogues 1 V-3 V (0.01-0.20), and short fluorescence lifetimes (0.50-1.05 ns). Two-photon absorption (TPA) spectra have been measured for 2 V-5 V, 5 B and 5 VE in the range 750-920 nm. The measured TPA cross-sections for the series 2 V-5 V increase steadily with length up to a maximum of 1930 GM. We compare the TPA properties of 2 V-5 V with the related compounds 5 B and 5 VE, giving insight into the structure-property relationship for this class of chromophore. DFT and TD-DFT results, including calculated TPA spectra, complement the experimental findings and contribute to their interpretation. A comparison to other related thiophene and dimesitylboryl compounds indicates that our design strategy is promising for the synthesis of efficient dyes for two-photon-excited fluorescence applications.

Synthesis and Photophysics of a 2,7-Disubstituted Donor–Acceptor Pyrene Derivative: An Example of the Application of Sequential Ir-Catalyzed C–H Borylation and Substitution Chemistry

We report a general and selective method to synthesize 2,7-disubstituted pyrene derivatives containing two different substituents by sequential Ir-catalyzed borylation and substitution chemistry. To demonstrate the utility of our approach, we synthesized 2-cyano-7-(N,N-diethylamino)pyrene (3), a pyrene analogue of the widely studied chromophore 4-(N,N-dimethylamino)benzonitrile (DMABN). Compound 3 and the monosubstituted compounds 2-(N,N-diethylamino)pyrene (1) and 2-cyanopyrene (2) have been structurally characterized. Their electronic and optical properties have been studied by a combination of absorption and emission spectroscopies, lifetime and quantum yield measurements, and modeling by DFT and TD-DFT. The photophysical properties of 3 are compared to those of DMABN and 2-cyano-7-(N,N-dimethylamino)-4,5,9,10-tetrahydropyrene, and we show that 2,7-disubstituted pyrene is a moderately effective π-bridge for the construction of donor-acceptor compounds. It is also shown that donor or acceptor groups are only effective at the 2,7-positions of pyrene if they are suitably strong, leading to a switch in the energetic ordering of the HOMO-1 and HOMO or the LUMO and LUMO+1 of pyrene, respectively.

Regiospecific Formation and Unusual Optical Properties of 2,5‐Bis(arylethynyl)rhodacyclopentadienes: A New Class of Luminescent Organometallics

A series of 2,5-bis(arylethynyl)rhodacyclopentadienes has been prepared by a rare example of regiospecific reductive coupling of 1,4-(p-R-phenyl)-1,3-butadiynes (R=H, Me, OMe, SMe, NMe2, CF3, CO2Me, CN, NO2, -C≡C-(p-C6H4-NHex2), -C≡C-(p-C6H4-CO2Oct)) at [RhX(PMe3)4] (1) (X=-C≡C-SiMe3 (a), -C≡C-(p-C6H4-NMe2) (b), -C≡C-C≡C-(p-C6H4-NPh2) (c) or -C≡C-{p-C6H4-C≡C-(p-C6H4 -N(C6H13)2)} (d) or Me (e)), giving the 2,5-bis(arylethynyl) isomer exclusively. The rhodacyclopentadienes bearing a methyl ligand in the equatorial plane (compound 1 e) have been converted into their chloro analogues by reaction with HCl etherate. The rhodacycles thus obtained are stable to air and moisture in the solid state and the acceptor-substituted compounds are even stable to air and moisture in solution. The photophysical properties of the rhodacyclopentadienes are highly unusual in that they exhibit, exclusively, fluorescence between 500-800 nm from the S1 state, with quantum yields of Φ=0.01-0.18 and short lifetimes (τ=0.45-8.20 ns). The triplet state formation (Φ(ISC) =0.57 for 2 a) is exceptionally slow, occurring on the nanosecond timescale. This is unexpected, because the Rh atom should normally facilitate intersystem crossing within femto- to picoseconds, leading to phosphorescence from the T1 state. This work therefore highlights that in some transition-metal complexes, the heavy atom can play a more subtle role in controlling the photophysical behavior than is commonly appreciated.

The formation of peroxide degradation products of photochromic triphenylimidazolyl radical-dimers

Following the recent report of Abe and co-workers (Phys. Chem. Chem. Phys., 2012, 14, 5855) of the isolation of a bridging peroxide of a naphthalene-tethered bisimidazolyl diradical, it is reported herein that this degradation pathway is a more general phenomenon for the chromic dimers of 2,4,5-triphenylimidazolyl radical (TPIR) materials, with non-tethered TPIRs forming similar oxygen adducts. The peroxides of two derivatives have been characterised by single crystal X-ray diffraction (SC-XRD) and it is identified that the 4-position of the imidazolyl ring is the site susceptible to reaction with oxygen. Furthermore, mass spectrometry has been used to show that for a range of five known, non-tethered derivatives, peroxide formation can be detected within 30 minutes when samples are irradiated under an oxygen atmosphere, thus presenting a significant challenge to the long term use of this class of material in colour-switching device applications.

Photocrystallisation of the 2C–2′C dimer of a triphenylimidazolyl radical

The structure of an unusual dimerisation mode of a triphenylimidazolyl radical has been elucidated, revealing a relatively long C–C bond. The diffraction-quality single crystals were produced under continuous irradiation by photocrystallisation in an adaption of the method that should be widely applicable to other photochromic systems.

Reductive Coupling of Diynes at Rhodium Gives Fluorescent Rhodacyclopentadienes or Phosphorescent Rhodium 2,2'-Biphenyl Complexes

Reactions of [Rh(κ(2) -O,O-acac)(PMe3 )2 ] (acac=acetylacetonato) and α,ω-bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties. As a result of a [2+2] reductive coupling at Rh, 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence (Φ=0.07-0.54, τ=0.2-2.5 ns) despite the presence of the heavy metal atom. Rhodium biphenyl complexes (B), which show exceptionally long-lived (hundreds of μs) phosphorescence (Φ=0.01-0.33) at room temperature in solution, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent β-H-shift. We attribute the different photophysical properties of isomers A and B to a higher excited state density and a less stabilized T1 state in the biphenyl complexes B, allowing for more efficient intersystem crossing S1 →Tn and T1 →S0 . Control of the isomer distribution is achieved by modification of the bis- (diyne) linker length, providing a fundamentally new route to access photoactive metal biphenyl compounds.