Stefan Demmler

Octave-spanning OPCPA system delivering CEP-stable few-cycle pulses and 22 W of average power at 1 MHz repetition rate

We report on an OPCPA system delivering CEP-stable pulses with a pulse duration of only 1.7 optical cycles at 880 nm wavelength. This pulse duration is achieved by the generation, optical parametric amplification and compression of a full optical octave of bandwidth. The system is pumped by a high average power Yb-fiber laser system, which allows for operation of the OPCPA at up to 1 MHz repetition rate and 22 W of average output power. Further scaling towards single-cycle pulses, higher energy and output power is discussed.

Coherently-combined two channel femtosecond fiber CPA system producing 3 mJ pulse energy

We present a fiber CPA system consisting of two coherently combined fiber amplifiers, which have been arranged in an actively stabilized Mach-Zehnder interferometer. Pulse durations as short as 470 fs and pulse energies of 3 mJ, corresponding to 5.4 GW of peak power, have been achieved at an average power of 30 W.

Thermal effects in high average power optical parametric amplifiers

Optical parametric amplifiers (OPAs) have the reputation of being average power scalable due to the instantaneous nature of the parametric process (zero quantum defect). This Letter reveals serious challenges originating from thermal load in the nonlinear crystal caused by absorption. We investigate these thermal effects in high average power OPAs based on beta barium borate. Absorption of both pump and idler waves is identified to contribute significantly to heating of the nonlinear crystal. A temperature increase of up to 148 K with respect to the environment is observed and mechanical tensile stress up to 40 MPa is found, indicating a high risk of crystal fracture under such conditions. By restricting the idler to a wavelength range far from absorption bands and removing the crystal coating we reduce the peak temperature and the resulting temperature gradient significantly. Guidelines for further power scaling of OPAs and other nonlinear devices are given.

53 W average power few-cycle fiber laser system generating soft x rays up to the water window

We report on a few-cycle laser system delivering sub-8-fs pulses with 353 μJ pulse energy and 25 GW of peak power at up to 150 kHz repetition rate. The corresponding average output power is as high as 53 W, which represents the highest average power obtained from any few-cycle laser architecture so far. The combination of both high average and high peak power provides unique opportunities for applications. We demonstrate high harmonic generation up to the water window and record-high photon flux in the soft x-ray spectral region. This tabletop source of high-photon flux soft x rays will, for example, enable coherent diffractive imaging with sub-10-nm resolution in the near future.

Generation of µW level plateau harmonics at high repetition rate

The process of high harmonic generation allows for coherent transfer of infrared laser light to the extreme ultraviolet spectral range opening a variety of applications. The low conversion efficiency of this process calls for optimization or higher repetition rate intense ultrashort pulse lasers. Here we present state-of-the-art fiber laser systems for the generation of high harmonics up to 1 MHz repetition rate. We perform measurements of the average power with a calibrated spectrometer and achieved µW harmonics between 45 nm and 61 nm (H23-H17) at a repetition rate of 50 kHz. Additionally, we show the potential for few-cycle pulses at high average power and repetition rate that may enable water-window harmonics at unprecedented repetition rate.

Generation of high quality, 1.3 cycle pulses by active phase control of an octave spanning supercontinuum

Nonlinear pulse compression based on the generation of ultra-broadband supercontinuum (SC) in an all-normal dispersion photonic crystal fiber (ANDi PCF) is demonstrated. The highly coherent and smooth octave-spanning SC spectra are generated using 6 fs, 3 nJ pulses from a Ti:Sapphire oscillator for pumping a 13 mm piece of ANDi PCF. Applying active phase control has enabled the generation of 4.5 fs pulses. Additional spectral amplitude shaping has increased the bandwidth of the SC spectra further leading to nearly transform-limited pulses with a duration of 3.64 fs, which corresponds to only 1.3 optical cycles at a central wavelength of 810 nm. This is the shortest pulse duration achieved via compression of SC spectra generated in PCF to date. Due to the high stability and the smooth spectral intensity and phase distribution of the generated SC, an excellent temporal pulse quality exhibiting a pulse contrast of 14 dB with respect to the pre- and post-pulses is achieved.

Real-time and Sub-wavelength Ultrafast Coherent Diffraction Imaging in the Extreme Ultraviolet

Coherent Diffraction Imaging is a technique to study matter with nanometer-scale spatial resolution based on coherent illumination of the sample with hard X-ray, soft X-ray or extreme ultraviolet light delivered from synchrotrons or more recently X-ray Free-Electron Lasers. This robust technique simultaneously allows quantitative amplitude and phase contrast imaging. Laser-driven high harmonic generation XUV-sources allow table-top realizations. However, the low conversion efficiency of lab-based sources imposes either a large scale laser system or long exposure times, preventing many applications. Here we present a lensless imaging experiment combining a high numerical aperture (NA = 0.8) setup with a high average power fibre laser driven high harmonic source. The high flux and narrow-band harmonic line at 33.2 nm enables either sub-wavelength spatial resolution close to the Abbe limit (Δr = 0.8λ) for long exposure time, or sub-70 nm imaging in less than one second. The unprecedented high spatial resolution, compactness of the setup together with the real-time capability paves the way for a plethora of applications in fundamental and life sciences.

1 MHz repetition rate hollow fiber pulse compression to sub-100-fs duration at 100 W average power

We report on nonlinear pulse compression at very high average power. A high-power fiber chirped pulse amplification system based on a novel large pitch photonic crystal fiber delivers 700 fs pulses with 200 μJ pulse energy at a 1 MHz repetition rate, resulting in 200 W of average power. Subsequent spectral broadening in a xenon-filled hollow-core fiber and pulse compression with chirped mirrors is employed for pulse shortening and peak power enhancement. For the first time, to our knowledge, more than 100 W of average power are transmitted through a noble-gas-filled hollow fiber. After pulse compression of 81 fs, 93 μJ pulses are obtained at a 1 MHz repetition rate.

High-repetition-rate sub-5-fs pulses with 12 GW peak power from fiber-amplifier-pumped optical parametric chirped-pulse amplification

An optical parametric chirped-pulse amplification system delivering pulses with more than 12 GW peak power is presented. Compression to sub-5 fs, 87 μJ and 5.4 fs, 100 μJ is realized at the 30 kHz repetition rate. A high-energy fiber chirped-pulse amplification system operating at 1 mJ pulse energy and nearly transform-limited pulses is used to achieve ultrabroadband amplification in two 2mm beta-barium borate crystals. Precise pulse shaping is used to compress the pulses to a few percentages of their transform limit. Assuming diffraction limited focusing (d<2 μm), peak intensities as high as 10(18) W/cm(2) can be reached.

Analysis and suppression of parasitic processes in noncollinear optical parametric amplifiers

The influence of parasitic processes on the performance of ultra-broadband noncollinear optical parametric amplifiers (NOPAs) is investigated for walk-off and non-walk-off compensating configurations. Experimental results with a white-light-seeded NOPA agree well with numerical simulations. The same model shows that 10% of the output energy of an amplified signal can be transferred into a parasitic second harmonic of the signal. These findings are supported by quantitative measurements on a few-cycle NOPA, where a few percent of the signal energy is converted to its second harmonic in the walk-off compensating case. This effect is reduced by an order of magnitude in the non-walk-off compensating configuration. A detailed study of the phase-matching conditions of the most common nonlinear crystals provides guidelines for designing NOPA systems.