Su Kong Chong

Structural and photoluminescence studies on catalytic growth of silicon/zinc oxide heterostructure nanowires

Silicon/zinc oxide (Si/ZnO) core-shell nanowires (NWs) were prepared on a p-type Si(111) substrate using a two-step growth process. First, indium seed-coated Si NWs (In/Si NWs) were synthesized using a plasma-assisted hot-wire chemical vapor deposition technique. This was then followed by the growth of a ZnO nanostructure shell layer using a vapor transport and condensation method. By varying the ZnO growth time from 0.5 to 2 h, different morphologies of ZnO nanostructures, such as ZnO nanoparticles, ZnO shell layer, and ZnO nanorods were grown on the In/Si NWs. The In seeds were believed to act as centers to attract the ZnO molecule vapors, further inducing the lateral growth of ZnO nanorods from the Si/ZnO core-shell NWs via a vapor-liquid-solid mechanism. The ZnO nanorods had a tendency to grow in the direction of [0001] as indicated by X-ray diffraction and high resolution transmission electron microscopy analyses. We showed that the Si/ZnO core-shell NWs exhibit a broad visible emission ranging from 400 to 750 nm due to the combination of emissions from oxygen vacancies in ZnO and In2O3 structures and nanocrystallite Si on the Si NWs. The hierarchical growth of straight ZnO nanorods on the core-shell NWs eventually reduced the defect (green) emission and enhanced the near band edge (ultraviolet) emission of the ZnO.

Structure deformation of indium oxide from nanoparticles into nanostructured polycrystalline films by in situ thermal radiation treatment

A microstructure deformation of indium oxide (In2O3) nanoparticles by an in situ thermal radiation treatment in nitrous oxide plasma was investigated. The In2O3 nanoparticles were completely transformed into nanostructured In2O3 films upon 10 min of treatment time. The treated In2O3 nanoparticle sample showed improvement in crystallinity while maintaining a large surface area of nanostructure morphology. The direct transition optical absorption at higher photon energy and the electrical conductivity of the In2O3 nanoparticles were significantly enhanced by the treatment.

Hierarchical Si/ZnO trunk-branch nanostructure for photocurrent enhancement

Hierarchical Si/ZnO trunk-branch nanostructures (NSs) have been synthesized by hot wire assisted chemical vapor deposition method for trunk Si nanowires (NWs) on indium tin oxide (ITO) substrate and followed by the vapor transport condensation (VTC) method for zinc oxide (ZnO) nanorods (NRs) which was laterally grown from each Si nanowires (NWs). A spin coating method has been used for zinc oxide (ZnO) seeding. This method is better compared with other group where they used sputtering method for the same process. The sputtering method only results in the growth of ZnO NRs on top of the Si trunk. Our method shows improvement by having the growth evenly distributed on the lateral sides and caps of the Si trunks, resulting in pine-leave-like NSs. Field emission scanning electron microscope image shows the hierarchical nanostructures resembling the shape of the leaves of pine trees. Single crystalline structure for the ZnO branch grown laterally from the crystalline Si trunk has been identified by using a lattice-resolved transmission electron microscope. A preliminary photoelectrochemical (PEC) cell testing has been setup to characterize the photocurrent of sole array of ZnO NR growth by both hydrothermal-grown (HTG) method and VTC method on ITO substrates. VTC-grown ZnO NRs showed greater photocurrent effect due to its better structural properties. The measured photocurrent was also compared with the array of hierarchical Si/ZnO trunk-branch NSs. The cell with the array of Si/ZnO trunk-branch NSs revealed four-fold magnitude enhancement in photocurrent density compared with the sole array of ZnO NRs obtain from VTC processes.

Single reactor deposition of silicon/tungsten oxide core-shell heterostructure nanowires with controllable structure and optical properties†

We report the controllable growth of silicon/tungsten oxide (Si/WO3) core–shell heterostructure nanowires via a two-step route using a home-built plasma-assisted hot-wire chemical vapour deposition reactor. Uniform coating of WO3 shell indicates a clear preference for growth on the single crystalline Si nanowires. Structure and crystallinity of the WO3 shell are strongly dependent on the filament temperature (Tf). X-ray diffraction patterns and micro-Raman spectra suggested that there was a structure evolution from amorphous into crystallite WO3 monoclinic structure when Tf was increased to 1300 °C and above. The WO3 shell exhibits stoichiometric tungsten trioxide structure as identified by micro-Raman and X-ray photoemission spectra analyses, which showed only W6+–O vibration modes for the former analysis and W6+ energy band for the latter. Microstructure, crystal lattice, interface and growth orientation of the core–shell nanowires were recognized using a high resolution transmission electron microscopy. Our results showed that the core–shell nanowires had preserved the optical transmittance of Si core at a longer wavelength, while showing an additional transmission band edge at a shorter wavelength due to tungsten oxide coating. Their optical absorption increased to 80% and above in visible region, owing to the one-dimensional Si NWs backbone. Optical band gap of the core–shell nanowires showed a variation from 2.4 to 1.8 eV with Tf. This superior visible light absorption core–shell nanowires architecture subsequently enhanced the photocurrent density of the crystalline WO3 nanostructures.