Yuming Lai

Flexible and low-voltage integrated circuits constructed from high-performance nanocrystal transistors

Colloidal semiconductor nanocrystals are emerging as a new class of solution-processable materials for low-cost, flexible, thin-film electronics. Although these colloidal inks have been shown to form single, thin-film field-effect transistors with impressive characteristics, the use of multiple high-performance nanocrystal field-effect transistors in large-area integrated circuits has not been shown. This is needed to understand and demonstrate the applicability of these discrete nanocrystal field-effect transistors for advanced electronic technologies. Here we report solution-deposited nanocrystal integrated circuits, showing nanocrystal integrated circuit inverters, amplifiers and ring oscillators, constructed from high-performance, low-voltage, low-hysteresis CdSe nanocrystal field-effect transistors with electron mobilities of up to 22 cm(2) V(-1) s(-1), current modulation >10(6) and subthreshold swing of 0.28 V dec(-1). We fabricated the nanocrystal field-effect transistors and nanocrystal integrated circuits from colloidal inks on flexible plastic substrates and scaled the devices to operate at low voltages. We demonstrate that colloidal nanocrystal field-effect transistors can be used as building blocks to construct complex integrated circuits, promising a viable material for low-cost, flexible, large-area electronics.

Engineering charge injection and charge transport for high performance PbSe nanocrystal thin film devices and circuits.

We study charge injection and transport in PbSe nanocrystal thin films. By engineering the contact metallurgy and nanocrystal ligand exchange chemistry and surface passivation, we demonstrate partial Fermi-level pinning at the metal-nanocrystal interface and an insulator-to-metal transition with increased coupling and doping, allowing us to design high conductivity and mobility PbSe nanocrystal films. We construct complementary nanocrystal circuits from n-type and p-type transistors realized from a single nanocrystal material by selecting the contact metallurgy.

Flexible, low-voltage, and low-hysteresis PbSe nanowire field-effect transistors.

We report low-hysteresis, ambipolar bottom gold contact, colloidal PbSe nanowire (NW) field-effect transistors (FETs) by chemically modifying the silicon dioxide (SiO(2)) gate dielectric surface to overcome carrier trapping at the NW-gate dielectric interface. While water bound to silanol groups at the SiO(2) surface are believed to give rise to hysteresis in FETs of a wide range of nanoscale materials, we show that dehydration and silanization are insufficient in reducing PbSe NW FET hysteresis. Encapsulating PbSe NW FETs in cured poly(methyl) methacrylate (PMMA), dehydrates and uniquely passivates the SiO(2) surface, to form low-hysteresis FETs. Annealing predominantly p-type ambipolar PbSe NW FETs switches the FET behavior to predominantly n-type ambipolar, both with and without PMMA passivation. Heating the PbSe NW devices desorbs surface bound oxygen, even present in the atmosphere of an inert glovebox. Upon cooling, overtime oxygen readsorption switches the FET polarity to predominantly p-type ambipolar behavior, but PMMA encapsulation maintains low hysteresis. Unfortunately PMMA is sensitive to most solvents and heat treatments and therefore its application for nanostructured material deposition and doping is limited. Seeking a robust, general platform for low-hysteresis FETs we explored a variety of hydroxyl-free substrate surfaces, including silicon nitride, polyimide, and parylene, which show reduced electron trapping, but still large hysteresis. We identified a robust dielectric stack by assembling octadecylphosphonic acid (ODPA) on aluminum oxide (Al(2)O(3)) to form low-hysteresis FETs. We further integrated the ODPA/Al(2)O(3) gate dielectric stack on flexible substrates to demonstrate low-hysteresis, low-voltage FETs, and the promise of these nanostructured materials in flexible, electronic circuitry.

In situ repair of high-performance, flexible nanocrystal electronics for large-area fabrication and operation in air.

Colloidal semiconductor nanocrystal (NC) thin films have been integrated in light-emitting diodes, solar cells, field-effect transistors (FETs), and flexible, electronic circuits. However, NC devices are typically fabricated and operated in an inert environment since the reactive surface and high surface-to-volume ratio of NC materials render them sensitive to oxygen, water, and many solvents. This sensitivity has limited device scaling and large-scale device integration achievable by conventional fabrication technologies, which generally require ambient air and wet-chemical processing. Here, we present a simple, effective route to reverse the detrimental effects of chemical and environmental exposure, by incorporating, in situ, a chemical agent, namely, indium metal, which is thermally triggered to diffuse and repair the damage. Taking advantage of the recovery process, CdSe NC FETs are processed in air, patterned using the solvents of lithography, and packaged by atomic layer deposition to form large-area and flexible high-performance NC devices that operate stably in air.

Device Configurations for Ambipolar Transport in Flexible, Pentacene Transistors

www.MaterialsViews.com C O M M Device Confi gurations for Ambipolar Transport in Flexible, Pentacene Transistors U N IC By Sangameshwar Rao Saudari, Yu Jen Lin, Yuming Lai, and Cherie R. Kagan* A IO N Organic semiconductors are exciting materials for low-cost, fl exible electronic and optoelectronic applications, [ 1 ] but the device fabrication and confi guration may greatly impact the measured characteristics, masking the intrinsic organic semiconductor’s materials properties. One of the best examples is the typical observation of unipolar transport in organic fi eld-effect transistors (OFETs) and therefore the classifi cation of organic pand n-type materials. It is only recently that theoretical [ 2 ] and experimental [ 3–5 ] reports have shown that the intrinsic properties of organic semiconductors can support both electron and hole transport. Theoretical calculations have predicted that organic semiconductors such as pentacene and tetracene can be as good electron conductors as hole conductors. The experimental realization of ambipolar transport has been attributed to overcoming the extrinsic factors of high injection barriers for one of the charge carrier types (electrons/holes) at the metal-semiconductor interface, carrier trapping at the dielectric-semiconductor interface, and trap generation upon exposure to air. Engineering the interfaces between organic semiconductors and the device electrodes and dielectric has opened up opportunities to fabricate ambipolar devices with balanced electron and hole mobilities and near zero threshold voltage for promising applications of high gain complementary metal-oxide-semiconductor (CMOS)-like inverters [ 3 ] and multifunctional devices such a high effi ciency light emitting [ 6 ] and photosensing FETs. [ 7 , 8 ]

Flexible, High-Speed CdSe Nanocrystal Integrated Circuits

We report large-area, flexible, high-speed analog and digital colloidal CdSe nanocrystal integrated circuits operating at low voltages. Using photolithography and a newly developed process to fabricate vertical interconnect access holes, we scale down device dimensions, reducing parasitic capacitances and increasing the frequency of circuit operation, and scale up device fabrication over 4 in. flexible substrates. We demonstrate amplifiers with ∼7 kHz bandwidth, ring oscillators with <10 μs stage delays, and NAND and NOR logic gates.

Low-frequency (1/f) noise in nanocrystal field-effect transistors.

We investigate the origins and magnitude of low-frequency noise in high-mobility nanocrystal field-effect transistors and show the noise is of 1/f-type. Sub-band gap states, in particular, those introduced by nanocrystal surfaces, have a significant influence on the 1/f noise. By engineering the device geometry and passivating nanocrystal surfaces, we show that in the linear and saturation regimes the 1/f noise obeys Hooges model of mobility fluctuations, consistent with transport of a high density of accumulated carriers in extended electronic states of the NC thin films. In the subthreshold regime, the Fermi energy moves deeper into the mobility gap and sub-band gap trap states give rise to a transition to noise dominated by carrier number fluctuations as described in McWhorters model. CdSe nanocrystal field-effect transistors have a Hooge parameter of 3 × 10(-2), comparable to other solution-deposited, thin-film devices, promising high-performance, low-cost, low-noise integrated circuitry.

Flexible organic electronics for use in neural sensing

Recent research in brain-machine interfaces and devices to treat neurological disease indicate that important network activity exists at temporal and spatial scales beyond the resolution of existing implantable devices. High density, active electrode arrays hold great promise in enabling high-resolution interface with the brain to access and influence this network activity. Integrating flexible electronic devices directly at the neural interface can enable thousands of multiplexed electrodes to be connected using many fewer wires. Active electrode arrays have been demonstrated using flexible, inorganic silicon transistors. However, these approaches may be limited in their ability to be cost-effectively scaled to large array sizes (8×8 cm). Here we show amplifiers built using flexible organic transistors with sufficient performance for neural signal recording. We also demonstrate a pathway for a fully integrated, amplified and multiplexed electrode array built from these devices.