Jose Angel Paredes

POWER7™, a Highly Parallel, Scalable Multi-Core High End Server Processor

This paper gives an overview of the latest member of the POWER™ processor family, POWER7™. Eight quad-threaded cores, operating at frequencies up to 4.14 GHz, are integrated together with two memory controllers and high speed system links on a 567 mm die, employing 1.2B transistors in a 45 nm CMOS SOI technology with 11 layers of low-k copper wiring. The technology features deep trench capacitors which are used to build a 32 MB embedded DRAM L3 based on a 0.067 m DRAM cell. The functionally equivalent chip transistor count would have been over 2.7B if the L3 had been implemented with a conventional 6 transistor SRAM cell. (A detailed paper about the eDRAM implementation will be given in a separate paper of this Journal). Deep trench capacitors are also used to reduce on-chip voltage island supply noise. This paper describes the organization of the design and the features of the processor core, before moving on to discuss the circuits used for analog elements, clock generation and distribution, and I/O designs. The final section describes the details of the clocked storage elements, including special features for test, debug, and chip frequency tuning.

The 12-Core POWER8™ Processor With 7.6 Tb/s IO Bandwidth, Integrated Voltage Regulation, and Resonant Clocking

POWER8™ is a 12-core processor fabricated in IBMs 22 nm SOI technology with core and cache improvements driven by big data applications, providing 2.5× socket performance over POWER7+™. Core throughput is supported by 7.6 Tb/s of off-chip I/O bandwidth which is provided by three primary interfaces, including two new variants of Elastic Interface as well as embedded PCI Gen-3. Power efficiency is improved with several techniques. An on-chip controller based on an embedded PowerPC™ 405 processor applies per-core DVFS by adjusting DPLLs and fully integrated voltage regulators. Each voltage regulator is a highly distributed system of digitally controlled microregulators, which achieves a peak power efficiency of 90.5%. A wide frequency range resonant clock design is used in 13 clock meshes and demonstrates a minimum power savings of 4%. Power and delay efficiency is achieved through the use of pulsed-clock latches, which require statistical validation to ensure robust yield.

IBM POWER8 circuit design and energy optimization

The IBM POWER8™ processor is a 649-mm

5.1 POWER8 TM : A 12-core server-class processor in 22nm SOI with 7.6Tb/s off-chip bandwidth

^{2}

Power-constrained high-frequency circuits for the IBM POWER6 microprocessor

, 4.2-billion transistor, high-frequency microprocessor fabricated in the IBM 22-nm silicon on insulator (SOI) technology with embedded dynamic random access memory (eDRAM) and 15 layers of metal. With its twelve architecturally enhanced, eight-way multithreaded cores, 96-MB high-bandwidth shared third-level cache, and increased on and off-chip bandwidth, the POWER8 processor delivers industry-leading performance. This paper describes the circuit techniques and design methodologies that were employed for implementing this chip and that allowed it to maintain the power dissipation at the level of its predecessor while delivering a threefold increase in per-socket performance. Among the innovative technologies employed by the processor are resonant clocking, on-chip per-core voltage regulation, and enhanced eDRAM arrays.

A 32kB 2R/1W L1 data cache in 45nm SOI technology for the POWER7TM processor

The 12-core 649mm2 POWER8™ leverages IBMs 22nm eDRAM SOI technology [1], and microarchitectural enhancements to deliver up to 2.5× the socket performance [2] of its 32nm predecessor, POWER7+™ [3]. POWER8 contains 4.2B transistors and 31.5μF of deep-trench decoupling capacitance. Three thin-oxide transistor Vts are used for power/performance tuning, and thick-oxide transistors enable high-voltage I/O and analog designs. The 15-layer BEOL contains 5-80nm, 2-144nm, 3-288nm, and 3-640nm pitch layers for low-latency communication as well as 2-2400nm ultra-thick-metal (UTM) pitch layers for low-resistance distribution of power and clocks.

3.1 POWER9™: A processor family optimized for cognitive computing with 25Gb/s accelerator links and 16Gb/s PCIe Gen4

The IBM POWER6™ microprocessor is a high-frequency (>5-G Hz) microprocessor fabricated in the IBM 65-nm silicon-on-insulator (SOI) complementary metal-oxide semiconductor (CMOS) process technology. This paper describes the circuit, physical design, clocking, timing, power, and hardware characterization challenges faced in the pursuit of this industry-leading frequency. Traditional high-power, high-frequency techniques were abandoned in favor of more-power-efficient circuit design methodologies. The hardware frequency and power characterization are reviewed.

Method for checkpointing instruction groups with out-of-order floating point instructions in a multi-threaded processor

Increasing demand for parallelism due to out-of-order and multi-threading computation requires fast and dense arrays with multi-port capabilities. The load-store-unit (LSU) of the POWER7™ microprocessor core has a 32kB L1 data cache composed of four 8kB blocks. In a two-cycle back-to-back operation it supports concurrently two independent read and one write operations. Organized in banks of 16 cells each, the two reads operate independently in any of these banks, including two reads within the same bank, even the same cell. A bank selected for write is blocked for any read operation. If read and write collide within the same bank, collision-control circuitry provides write-over-read priority. Each read port provides 4B from 1 of 256 locations, whereas the double-bandwidth write operation provides individual control of 8B to 128 locations.

Processor instruction retry recovery

Cognitive computing and cloud infrastructure require flexible, connectable, and scalable processors with extreme IO bandwidth. With 4 distinct chip configurations, the POWER9 family of chips delivers multiple options for memory ports, core thread counts, and accelerator options to address this need. The 24-core scale-out processor is implemented in 14nm SOI FinFET technology [1] and contains 8.0B transistors. The 695mm2 chip uses 17 levels of copper interconnect: 3–64nm, 2–80nm, 4–128nm, 2–256nm, 4–360nm pitch wiring for signals and 2– 2400nm pitch wiring levels for power and global clock distribution. Digital logic uses three thin-oxide transistor Vts to balance power and performance requirements, while analog and high-voltage circuits eliminated thick-oxide devices providing process simplification and cost reduction. By leveraging the FinFETs increased current per area, the base standard cell image shrunk from 18 tracks per bit in planar 22nm to 10 tracks per bit in 14nm providing additional area scaling.