Norman E. Schumaker

Step and Repeat UV nanoimprint lithography tools and processes

Step and FlashTM Imprint Lithography (S-FILTM) process is a step and repeat nano-replication technique based on UV curable low viscosity liquids. Molecular Imprints, Inc. (MII) develops commercial tools that practice the S-FIL process. The current status of the S-FIL tool and process technology is presented in this paper. The specific topics that are covered include: • Residual layer control • Etch process development • Patterning of lines, contacts and posts • CD control • Defect and process life • Alignment and magnification control

Design and performance of a step and repeat imprinting machine

Molecular Imprints, Inc. (MII) has developed the ImprioTM 100, which is the first commercial step and repeat imprint lithography system with field-to-field alignment. This system is designed to implement the UV curable nano-replication capability of the Step and FlashTM Imprint Lithography (S-FILTM) process. To-date, the Imprio 100 system has demonstrated: 1) Full 200 mm wafer coverage with lithographically useful patterning; 2) Full wafer residual thickness control to enable practical etching (thickness variation < 50 nm, 3 sigma); 3) Field edge control compatible with 50 um kerf regions. 4) Multi-day CD uniformity measured on an analytical SEM < 2 nm, 3 sigma with no process adjustments; 5) Etch pattern transfer including break-through etch of residual material, followed by a bi-layer etch through thick planarization layers; 6) Initial level-to-level alignment target acquisition with accuracy of better than 100 nm. 7) Low air borne particle counts in tool microenvironment consistent with Class 0.1 while imprinting.

Status of Step and Flash Imprint Lithography tools and processes

The Step and Flash/sup TM/ Imprint Lithography (S-FIL/sup TM/) process is a step and repeat nanoreplication technique based on UV curable low viscosity liquids. This article discusses various process capability of S-FIL including imprint resolution and line edge roughness; field-to-field CD control; imprinted film thickness uniformity; process life and defect data; and overlay alignment accuracy.