Suziyanti Marjudi

Data transferring technique for mobile robot controller via mobile technology

Wireless communication technology is one of the most popular and important communications at this moment. The field of robotics includes various sectors such as factory sector, manufacturing and security. These papers describe research and investigation on mobile technologies usage such as 3G for mobile robot controller. Prototype development to be done to determine the capability of technology used to control a mobile robot by using specific commands by using a specific programming language. Then, research about the techniques use for transferring data from mobile devices using mobile technology for the mobile robot will be done. The results of this research are expected to provide benefits to consumers and mobile device manufacturers to optimize the usability of mobile devices owned or produced.

The development of CAD system for SME food packaging in Malaysia: A proposal

This endeavor proposes the development of a new computer-aided design (CAD) system given name as Packaging-Computer Aided Design (PackCAD). This system is proposed with a special intention and attention to support the design process of packaging food products by Small and Medium Enterprises (SMEs) irrespective of the minimum skills in handling a computers. Users are only required to select the pull-place (drag-drop) packaging form made in the template (stored in the data library) PackCAD in standard form or set free to change or resize the form according to the needs of food produced. The design constructed using PackCAD can be easily saved and opened to other CAD system.

Utilization of mobile technology for mobile robot controller

Mobile communication technology is one of the most popular and important communications at this moment. The field of robotics includes various sectors such as factory sector, manufacturing and security. This paper presents the utilization of different mobile technology for mobile robot controller such as Bluetooth, Wi-Fi or Wireless LAN and 3G. Comparison of the frequency, data rate and range for each mobile technology used in this application are discussed. For future work, we propose the development of mobile robot controller via mobile technology, which is 3G technology. The results of this research are expected to provide benefits to consumers and mobile device manufacturers to optimize the usability of mobile devices.

Extraction Method of Version Number in Engineering Drawing

In manufacturing industry, engineering drawing is used to facilitate the process of designing a product. In real situations, engineering drawing is usually in large quantities and not in order. In the process of designing a product, it produced many drawing. This paper describes a research and development of an extraction technique in the field of engineering drawing. Non-geometry information that will be emphasis in this research is version number.

Framework of CAD system in food packaging for Malaysian SMEs

This paper presents an overview of framework for the new CAD system specified in the design of food packaging for SMEs. The main problem was to identify the outline of features and functions necessary in a system that will be developed based on industry requirements. An extensive literature review and interview was conducted to gather information concerning the needs of industry. Therefore, a framework for developing the food packaging using CAD system was proposed and new system supports the SMEs to design a simple food packaging according to the standards. The framework proposed focus on operating system, user interface and data information management. Data information management is divided into two elements: data structured and representation and data management. Graphics package which consists of packaging design and labelling design element in data structured and representation. Data integrity and security, data dictionary and data stored: are elements of data management. A framework was proposed to support the design of food packaging although users only have the minimum skills of computer knowledge. Users could only select the drag-drop form of packaging as provided in the template or change the size of the design according to requirements.

Comparative study of data transfer for mobile robot controller via mobile technology

Mobile technologies and devices are being upgraded at an enormous speed. The market offers a variety of mobile devices and a number of different technologies. At this moment, wireless communication technology is one of the most popular and important communications in mobile technologies area. However, the growth of this technology not fully utilized as a mobile robot controller. The field of robotics includes various sectors such as factory sector, manufacturing and security. These papers describe research and investigation on mobile robot controller via mobile technologies. The most important in this paper is to compare the data transferring technique for mobile robot controller. Among the techniques in this study were Data Oriented Transfer Service (DOT), Distributed Parallel Storage System (DPSS), GridFTP and Black-Bus. For future work, we propose the development of mobile robot controller via mobile technology which is 3G technology. The results of this research are expected to provide benefits to consumers and mobile device manufacturers to optimize the usability of mobile devices.

A comparative study on extraction method of non-geometry information in engineering drawing

In manufacturing industry, engineering drawing is used to facilitate the process of designing a product. In real situation, the engineering drawing is usually available in a large quantity and not in order. This is due to many drawings are produced in the process of designing a product. Effective access of engineering drawings from various numbers of engineering drawings is very challenging. Engineer can reduce the cost of designing a new product by retrieving the original drawings of components from the database in the CAD software. This paper presents a review on extraction of non-geometry information in engineering drawing. It explores the past studies on the existing extraction methods discovered by numerous researchers in the field of engineering drawing. In this research, the information that will be extracted is non-geometry information such as length, thickness, radius, diameter and labels. The comparative example of extraction in engineering drawing of previous research has been carried out.

A study on CAD systems for food packaging

There are various computer-aided design (CAD) systems currently available in the market but mostly are general for common products. Especially for food packaging design, its features in the general CAD systems are limited and insufficient. In fact, the availability of CAD systems for such purpose is also scarce. Without having appropriate options, manufacturers relating to packaging businesses have to spend in high cost to purchase systems that are not really specific to their needs. Packaging design has its distinctive characteristics. Understanding this gap, the authors intend to develop a CAD system concentrating on food packaging dedicated for national small and medium enterprises. As an initial stage, the authors have done studies on aspects of CAD for product packaging, software for CAD system development, the CAD systems produced by Malaysians, data exchange methods, and the methodology of development applied as contained in this paper.

Awareness and Privacy Perceptions among Social Media User towards Social Data Analytics

Social Data Analytics represent a new era in the ability of organizations and businesses to tap the potential of the information economy. But, this new opportunity comes with hazards and risks as well. Privacy is the major concern among social media users. Protecting their personal information privacy has become a controversial issue among online social network providers and users. This study aims to determine the awareness of Social Data Analytics among the social media users .The result of this study can be used by future researchers, social media application developers, and providers’ to understand the level of awareness of Social Data Analytics among social media users. The result also can be used to develop a new framework or privacy system according to the social media user’s perception and requirement.

A Study on Data Exchange Method in Food Packaging CAD System

Packaging development has its own characteristics thus requires special approaches and methods of work. Although these products have good quality, but aspects are not comparable packaging, the products produced may be difficult to compete in the market especially competitive at international level. This endeavor proposes the development of a new computer-aided design (CAD) system given name as Packaging-Computer Aided Design (PackCAD). Since the features of respective software are unique and varied, they should be able to communicate among themselves. The purpose of this work is to study data exchange method to develop content for PackCAD system.