Ming-Jinn Tsai

Metal–Oxide RRAM

In this paper, recent progress of binary metal-oxide resistive switching random access memory (RRAM) is reviewed. The physical mechanism, material properties, and electrical characteristics of a variety of binary metal-oxide RRAM are discussed, with a focus on the use of RRAM for nonvolatile memory application. A review of recent development of large-scale RRAM arrays is given. Issues such as uniformity, endurance, retention, multibit operation, and scaling trends are discussed.

Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM

A novel HfO2-based resistive memory with the TiN electrodes is proposed and fully integrated with 0.18 mum CMOS technology. By using a thin Ti layer as the reactive buffer layer into the anodic side of capacitor-like memory cell, excellent memory performances, such as low operation current (down to 25 muA), high on/off resistance ratio (above 1,000), fast switching speed (5 ns), satisfactory switching endurance (>106 cycles), and reliable data retention (10 years extrapolation at 200degC) have been demonstrated in our memory device. Moreover, the benefits of high yield, robust memory performance at high temperature (200degC), excellent scalability, and multi-level operation promise its application in the next generation nonvolatile memory.

Unipolar resistive switching characteristics of ZnO thin films for nonvolatile memory applications

Highly (002)-oriented and columnar-grained ZnO thin films were prepared by radio frequency magnetron sputtering at room temperature. The Pt∕ZnO∕Pt devices exhibit reversible and steady bistable resistance switching behaviors with a narrow dispersion of the resistance states and switching voltage. Only a low forming electric field was required to induce the resistive switching characteristics. The resistance ratios of high resistance state to low resistance state were in the range of 3–4 orders of magnitude within 100cycles of test. It was also found that the conduction mechanisms dominating the low and high resistance states are Ohmic behavior and Poole-Frenkel emission, respectively.

Highly scalable hafnium oxide memory with improvements of resistive distribution and read disturb immunity

A 30×30 nm2 HfOx resistance random access memory (RRAM) with excellent electrical performances is demonstrated for the scaling feasibility in this work. A 1 Kb one transistor and one resistor (1T1R) array with robust characteristics was also fabricated successfully. The device yield of the 1 Kb array is 100%, and the endurance for these devices can exceed 106 cycles by a pulse width of 40 ns. Two effective verification methods, which make a tight distribution of high resistance (RHIGH) and low resistance (RLOW) are proposed for the array to ensure a good operation window. A thin AlOx buffer layer under the HfOx layer was adopted to enhance the read disturb immunity. Without large parasitic capacitance, the 1T1R RRAM devices exhibit excellent program(PGM)/erase(ERS) disturb immunity.

Influence of electrode material on the resistive memory switching property of indium gallium zinc oxide thin films

The InGaZnO taken as switching layer in resistive nonvolatile memory is proposed in this paper. The memory cells composed of Ti/InGaZnO/TiN reveal the bipolar switching behavior that keeps stable resistance ratio of 102 with switching responses over 100 cycles. The resistance switching is ascribed to the formation/disruption of conducting filaments upon electrochemical reaction near/at the bias-applied electrode. The influence of electrode material on resistance switching is investigated through Pt/InGaZnO/TiN devices, which perform the unipolar and bipolar behavior as applying bias on Pt and TiN electrode, respectively. Experimental results demonstrate that the switching behavior is selective by the electrode.

A 4Mb embedded SLC resistive-RAM macro with 7.2ns read-write random-access time and 160ns MLC-access capability

Several emerging nonvolatile memories (NVMs) including phase-change RAM (PCRAM) [1–3], MRAM [4–5], and resistive RAM (RRAM) [6–8] have achieved faster operating speeds than embedded Flash. Among those emerging NVMs, RRAM has advantages in faster write time, a larger resistance-ratio (R-ratio), and smaller write power consumption. However, RRAM cells have large cross-die and within-die resistance variations (R-variations) and require low read-mode bitline (BL) bias voltage (VBL-R) to prevent read disturbance. This work proposes process/resistance variation-insensitive read schemes for embedded RRAM to achieve fast read speeds with high yields. An embedded mega-bit scale (4Mb), single-level-cell (SLC) RRAM macro with sub-8ns read-write random-access time is presented. Multi-level-cell (MLC) operation with 160ns write-ver-ify operation is demonstrated.

Low-Power Switching of Nonvolatile Resistive Memory Using Hafnium Oxide

Nonstoichiometric hafnium oxide (HfOx) resistive-switching memory devices with low-power operation have been demonstrated. Polycrystalline HfOx (O:Hf=1.5:1) films with a thickness of 20 nm are grown on a titanium nitride (TiN) bottom electrode by commercial atomic layer deposition. Platinum (Pt) as a top electrode is used in the memory device. Voltage-induced resistance switching is repeatedly observed in the Pt/HfOx/TiN/Si memory device with resistance ratio is greater than 10. During the switching cycles, the power consumptions for high- and low-resistance states are found to be 0.25 and 0.15 mW, respectively. At 85 °C, the memory device shows stable resistance switching and superior data retention with resistance ratio is greater than 100. In addition, our memory device shows little area dependence of resistance-switching behavior. The anodic electrode containing noble metal Pt serves an important role in maintaining stable resistance switching. The resistance switching in the HfOx films is thought to be due to the defects that are generated by the applied bias. The nonstoichiometric HfOx films are responsible for the low SET and RESET currents during switching. Our study shows that the HfOx resistive-switching memory is a promising candidate for next-generation nonvolatile memory device applications.

Evidence and solution of over-RESET problem for HfO X based resistive memory with sub-ns switching speed and high endurance

The memory performances of the HfOX based bipolar resistive memory, including switching speed and memory reliability, are greatly improved in this work. Record high switching speed down to 300 ps is achieved. The cycling test shed a clear light on the wearing behavior of resistance states, and the correlation between over-RESET phenomenon and the worn low resistance state in the devices is discussed. The modified bottom electrode is proposed for the memory device to maintain the memory window and to endure resistive switching up to 1010 cycles.

Improvement of resistive switching characteristics in TiO2 thin films with embedded Pt nanocrystals

We have fabricated TiO 2 thin films with embedded Pt nanocrystals (Pt-NCs) and investigated the resistive switching characteristics for nonvolatile memory application. Reversible and steady bistable resistance switching behavior was observed for the Pt / TiO 2 / Pt capacitors with Pt-NCs embedded in the TiO 2 films. Moreover, an improvement in the stability of resistance switching and retention properties was also achieved from the embedding of uniform and fine Pt-NCs.

Low Programming Current Phase Change Memory Cell with Double GST Thermally Confined Structure

A novel PCM cell with double GST thermally confined structure was proposed and fabricated in this work. by inserting an extra bottom GST layer under the confined GST region, the heat loss can be effectively prevented and the temperature profile over active region becomes more uniform. thus, a low reset current less than 0.3 ma can be achieved and the set performance is also improved to be faster than 200 ns.