Gilbert Dewey

Fabrication, characterization, and physics of III–V heterojunction tunneling Field Effect Transistors (H-TFET) for steep sub-threshold swing

This work demonstrates the steepest subthreshold swing (SS < 60mV/decade) ever reported in a III–V Tunneling Field Effect Transistor (TFET) by using thin gate oxide, heterojunction engineering and high source doping. Owing to a lower source-to-channel tunnel barrier height, heterojunction III–V TFETs demonstrate steeper subthreshold swing (SS) at a given drain current (ID) and improved drive current compared to the homojunction III–V TFETs. Electrical oxide thickness (EOT) scaling and increased source doping in tandem with tunnel barrier height reduction are shown to greatly improve the SS of the III–V TFETs and increase ID by more than 20X.

Tri-Gate Transistor Architecture with High-k Gate Dielectrics, Metal Gates and Strain Engineering

We have combined the benefits of the fully depleted tri-gate transistor architecture with high-k gate dielectrics, metal gate electrodes and strain engineering. High performance NMOS and PMOS trigate transistors are demonstrated with IDSAT=1.4 mA/mum and 1.1 mA/mum respectively (IOFF=100nA/mum, VCC =1.1V and LG=40nm) with excellent short channel effects (SCE)-DIBL and subthreshold swing, DeltaS. The contributions of strain, the lang100rang vs. lang110rang substrate orientations, high-k gate dielectrics, and low channel doping are investigated for a variety of channel dimensions and FIN profiles. We observe no evidence of early parasitic corner transistor turn-on in the current devices which can potentially degrade ION-IOFF and DeltaS

High-performance 40nm gate length InSb p-channel compressively strained quantum well field effect transistors for low-power (VCC=0.5V) logic applications

This paper describes for the first time, a high-speed and low-power III-V p-channel QWFET using a compressively strained InSb QW structure. The InSb p-channel QW device structure, grown using solid source MBE, demonstrates a high hole mobility of 1,230 cm2/V-s. The shortest 40 nm gate length (LG) transistors achieve peak transconductance (Gm) of 510 muS/mum and cut-off frequency (fT) of 140 GHz at supply voltage of 0.5V. These represent the highest Gm and fT ever reported for III-V p-channel FETs. In addition, effective hole velocity of this device has been measured and compared to that of the standard strained Si p-channel MOSFET.

Advanced high-K gate dielectric for high-performance short-channel In 0.7 Ga 0.3 As quantum well field effect transistors on silicon substrate for low power logic applications

This paper describes integration of an advanced composite high-K gate stack (4nm TaSiO<inf>x</inf>-2nm InP) in the In<inf>0.7</inf>Ga<inf>0.3</inf>As quantum-well field effect transistor (QWFET) on silicon substrate. The composite high-K gate stack enables both (i) thin electrical oxide thickness (t<inf>OXE</inf>) and low gate leakage (J<inf>G</inf>) and (ii) effective carrier confinement and high effective carrier velocity (V<inf>eff</inf>) in the QW channel. The L<inf>G</inf>=75nm In<inf>0.7</inf>Ga<inf>0.3</inf>As QWFET on Si with this composite high-K gate stack achieves high transconductance of 1750µS/µm and high drive current of 0.49mA/µm at V<inf>DS</inf>=0.5V.

Electrostatics improvement in 3-D tri-gate over ultra-thin body planar InGaAs quantum well field effect transistors with high-K gate dielectric and scaled gate-to-drain/gate-to-source separation

In this work, 3-D Tri-gate and ultra-thin body planar InGaAs quantum well field effect transistors (QWFETs) with high-K gate dielectric and scaled gate-to-source/gate-to-drain (LSIDE) have been fabricated and compared. For the first time, 3-D Tri-gate InGaAs devices demonstrate electrostatics improvement over the ultra-thin (QW thickness, TQW=10nm) body planar InGaAs device due to (i) narrow fin width (WFIN) of 30nm and (ii) high quality high-K gate dielectric interface on the InGaAs fin. Additionally, the 3-D Tri-gate InGaAs devices in this work achieve the best electrostatics, as evidenced by the steepest SS and the smallest DIBL, ever reported for any high-K III–V field effect transistor. The results in this work show that the 3-D Tri-gate device architecture is an effective way to improve the scalability of III–V FETs for future low power logic applications.

Ultrahigh-Speed 0.5 V Supply Voltage

The direct epitaxial growth of ultrahigh-mobility InGaAs/InAlAs quantum-well (QW) device layers onto silicon substrates using metamorphic buffer layers is demonstrated for the first time. In this letter, 80 nm physical gate length depletion-mode InGaAs QW transistors with saturated transconductance gm of 930 muS / mum and fT of 260 GHz at VDS = 0.5 V are achieved on 3.2 mum thick buffers. We expect that compound semiconductor-based advanced QW transistors could become available in the future as very high-speed and ultralow-power device technology for heterogeneous integration with the mainstream silicon CMOS.

\hbox{In}_{0.7} \hbox{Ga}_{0.3}\hbox{As}

Planar CMOS transistors have been fabricated to evaluate the 70 nm technology node using conventional transistor design methodologies. Conventional CMOS transistors with 30 nm physical gate length were fabricated using aggressively scaled junctions, polysilicon gate electrode, gate oxide and Ni silicide. These devices have inversion Cox exceeding 1.9 /spl mu/F/cm2, n-MOS gate delay (CV/I) of 0.94 ps and p-MOS gate delay of 1.7 ps at V/sub cc/=0.85 V. These are the smallest CV/I values ever reported for Si CMOS devices. The transistors also show good short channel control and subthreshold swings. The n-MOS and p-MOS have drive currents equal to 514 /spl mu/A//spl mu/m and 285 /spl mu/A//spl mu/m respectively with I/sub off/ at or below 100 nA//spl mu/m at Vcc=0.85 V. The saturation gm is equal to 1200 mS/mm for n-MOS and 640 mS/mm for p-MOS. These are among the highest gm values ever reported. The junction edge leakage is reasonably low with less than 1 nA//spl mu/m at 1.0 V and 100 C for both n-MOS and p-MOS. These encouraging results suggest that the 70 nm technology node is achievable using conventional planar transistor design and process flow.

Quantum-Well Transistors on Silicon Substrate

In this work, non-planar, multi-gate InGaAs quantum well field effect transistors (QWFETs) with high-K gate dielectric and ultra-scaled gate-to-drain and gate-to-source separations (LSIDE) of 5nm are reported for the first time. The high-K gate dielectric formed on this non-planar device structure has the expected thin TOXE of 20.5Å with low JG, and high quality gate dielectric interface. The simplified S/D scheme is needed for the non-planar architecture while achieving significant reduction in parasitic resistance. Compared to the planar high-K InGaAs QWFET with similar TOXE, the non-planar, multi-gate InGaAs QWFET shows significantly improved electrostatics due to better gate control. The results of this work show that non-planar, multi-gate device architecture is an effective way to improve the scalability of III–V QWFETs for low power logic applications.

30 nm physical gate length CMOS transistors with 1.0 ps n-MOS and 1.7 ps p-MOS gate delays

We integrate a strained Si channel with HfO/sub 2/ dielectric and TiN metal gate electrode to demonstrate NMOS transistors with electron mobility better than the universal mobility curve for SiO/sub 2/, inversion equivalent oxide thickness of 1.4 nm (EOT=1 nm), and with three orders of magnitude reduction in gate leakage. To understand the physical mechanism that improves the inversion electron mobility at the HfO/sub 2//strained Si interface, we measure mobility at various temperatures and extract the various scattering components.

Non-planar, multi-gate InGaAs quantum well field effect transistors with high-K gate dielectric and ultra-scaled gate-to-drain/gate-to-source separation for low power logic applications

This paper describes for the first time, the heterogeneous integration of In0.7Ga0.3As quantum well device structure on Si substrate through a novel, thin composite metamorphic buffer architecture with the total composite buffer thickness successfully scaled down to 1.mum, resulting in high- performance short-channel enhancement-mode In0.7Ga0.3As QWFETs on Si substrate for future high-speed digital logic applications at low supply voltage such as 0.5 V.